Municipal Affairs Department Tender

ii) 100 mm diameter

P - 338 It No- 18.41 Labour for fitting and fixing 10 cm. to 13 cm. diameter Sal-bullah / Eucalyptus - bullah as ties and runners including necessary nails, bolts and nuts.

It-18.27, p-335 Coal tarring on wooden surfaces including cost of materials single coat (a) Double coat.

It-3, iv, p-1 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

It-4, A, iv, p-2 (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

It-18.28, p-336 Supply empty cement bags in good condition

It-18.29, p-336 Filling empty cement bags with dry earth or sand stitching the bag (cost of thread included and carrying and placing them in position and all incidental charge complete but excluding cost of sand and gunnybags)

Page No - 1, Item No - 2 (a) Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.

Page No - 63, Item No - 34, C Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength 1500 N

SOR 2018, IWD, Page No. C - 6, Item No - 1.12 Earthwork in re-excavation / silt clearance in drainage channel in all kinds of soil including sludge, slush mixed with all sorts of industrial wastes and municipal garbages, polypacks, carcasses, small khatal effluents, night soil etc. by mathor labour as may be necessary and depositing the same in places as directed by the Engineer-in-charge, in such a manner, without causing much hindrance to traffic and posing health hazard and making arrangement to maintain the site in workable condition and rough dressing when dry including making arrangement of bailing out of any seepage water and removal of sand or soil blown from underneath. removal of khatal, temporary latrines, clearing and removing all kinds of semi compact masses formed by water hyacinth, jungles up to 30 cm girth, and burning them to ashes or removing outside Government land in conformity with the Municipal rules, including shoring shuttering as required, nicking out lines etc. (b) By mechanical means using hydraulic exacavators within an initial lead at 30 Mtr and initial lift 3.0 Mtr (Measurement: Pre-work and Post-work level section. Pre- work section to be taken after removal of water hyacinth and all other floating materials etc.)

PWD(B), P-228, It-7 Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in- Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.

PWD(B),Page No - 34, Item No - 22 Cement concrete with graded stone ballast (40 mm size excluding shuttering) (A) [Pakur Variety] (a) 1:3:6 proportion. In ground floor

SOR 2018,, Page No. C - 6, Item No - 1.25 Clearing and removal of water hyacinth including weeds, thick and thomy floating jungles and burning them to ashes when dry or removing them outside Government land including all leads and lifts to stack in a nearby available

PWD(B), P-268, It-19 Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared)

PWD(B), P-259, It-4 Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1'x1' or bigger) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by Engineer-in-charge. (Rate includes supply of labour, tools & plants including materials)

( P - 260, It. No.7) Planting of trees ( Avenue plants) in 0.60m dia holea, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure. This includes supply of labour, tools & plants including materials but excluding cost of tree..

(P - 260, It. No.8) Maintanance of trees for one year (Avenue Plants) including watering, trimming, manuring, spraying insecticide and guarding as required. This includes supply of labour, tools & plants including materials.

(Page 260, It No 9) Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc (i)Rangon chineese of size not less than 20cm

Ficus bengalensis (variegated) of height 60-75cm in earthen pots size 30cm

Acalypha species ( Red/Green) of height 30cm-90cm in earthen pots of size 25cm.

Adenium obesum of height 90cm-60cm in earthen pots of size 25cm.

Bougainvillea (mix variety) of height 30cm-90cm in polybag of size 10cm-15cm.

Page No - 78, Item No - 8 M.S. round or square bar grating of windows etc. fitted and fixed in holes of window frame and with intermediate flat bar stiffener( with necessary holes for the grating bars and with the ends turned and fixed to timber frame with necessary screws) complete, as directed.

Page No - 176, Item No - 7(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Page No - 176, Item No - 7(A), (b), (iv) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white)

Ref Approval of Rate vide Memo No: ME/SE(CC)/277/G13/2017, Date:24/11/22 Supply & Installation VISHALA Cast Iron Powder Coating Garden Bench, Capacity 3 Seater VISHALA (VGB-03), Product id: 5116877-60399337452, Country Of Origin: India, Local Content (MII): 95%, Sold by: OEM OEM verifi ed catalogue,Seating Capacity : 3 Seater, Stand/Legs Design : Decorative, Finsh : Powder Coating, Back Rest : With, Arm Rest : With, Warranty : 3 year, Weight Bearing Capacity : 90 kilogram, Side Frame Material : Cast Iron, Seat Material : Mild Steel Pipe 14 Gauge, Back Rest Material: Mild Steel Pipe 14 Gauge, Total Height: 870 millimeter, Seat Height: 450 millimeter, Width: 550 millimeter, Total Area Required: 1550 millimeter

Add applicable 18.00% GST = Rs

Add 1.00% Labour welfare Cess = Rs