Municipal Affairs Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Municipal Affairs Department - MAD Tender
Civil And Construction
Excavation
Water Storage And Supply
Eprocure
Opening Date18 Nov 2024
Closing Date13 Dec 2024
Tender Amount₹ 1,23,25,523
Costs
EMD
₹ 2,46,510Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Sinking Of 2 Nos. Tube Well Of Size 250 Mm X 150 Mm Dia. And 150 Mtr. Deep By Reverse Rotary Rig Method Using Upvc Pipes Along With Construction Of Pump House, Surging Etc...within Haldibari Municipality Under Amrut 2.0.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MAD_770356_1Tender No
21 of SE(N)/MED/2024 -25 dated-18/11/2024Tender Authority
Municipal Affairs Department ViewPurchaser Address
-Website
http://http://www.wburbanservices.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
From 6 Mtr. to 60 Mtr.
108
885
95580
From 60 Mtr. to 90 Mtr.
60
974
58440
From 90 Mtr. to 120 Mtr.
60
1071
64260
From 120 Mtr. to 150 Mtr.
72
1178
84816
Lowering the tube well assembly (UPVC Casing pipe ,well pipe, strainer along with UPVC accessories) vertically in a position with proper lowering arrangement by applying necessary jointing compound including labour cost for subsequent gravel packing and machine operation cost etc.
2
26571
53142
Cost of Consumables for drilling rigs and machineries.
2
22077
44154
Development (Min. 8 Hr. continuous) of tube well by using suitable air compressor (Min. Capacity: 600CFM & operating Pressure 14 Bar) followed by yield testing with BHT pump (Head :45 to 50mtr.,Discharge :1100 to 1000 LPM and 25 BHP engine) all complete including To & Fro Transportation cost and Cost of fuels, lubricants & Labour etc.
2
56908
113816
Water sample collection and chemical test including Arsenic Test.
2
2425
4850
Transportation cost of drilling equipment and accessories rig machine etc. including cost of fuel,Lubricant & loading unloading the materials from store/stack yard /suppliers godown and unloading /stacking the same at site. (Upto 60.0 km distance)
2
59786
119572
Supply and delivery of UPVC pipe (CD) conforming to IS 12818:2010. (CIPET Certified) (CORRIGENDAM & ADDENDUM-1 OF 2022)
-
-
-
b) 250 mm dia.
62
4158
257796
d) 150 mm dia.
186
1551
288486
Supply and delivery of UPVC Deep Well Screen (RDS) Pipes with Ribs conforming to IS 12818:2010 .(CIPET Certified) (CORRIGENDAM & ADDENDUM-1 OF 2022)
-
-
-
a) 150 mm dia.
52
2367
123084
Supply and delivery of UPVC Reducer (CORRIGENDAM & ADDENDUM-1 OF 2022)
-
-
-
250mmx200mm
2
1967
3934
200mmx150mm
2
1213
2426
Supply and delivery of UPVC Cap (CORRIGENDAM & ADDENDUM-1 OF 2022)
-
-
-
a) 250 mm dia.
2
1960
3920
b) 150 mm dia.
2
685
1370
Supply and delivery of M.S. Housing clamp 250 mm dia.
2
3252
6504
Supply and delivery of M.S .Centre guide (Special Type).
20
950
19000
Supply and delivery of Washed gravels size ranging from 1.80 mm to 4.74 mm. conforming to IS 4097 : 1967.
50
3810
190500
Supply and delivery of Bentonite Powder conforming to IS 6186 : 1986.
2
13963
27926
Electro-logging charge.
2
15715
31430
Pump House (2 nos. at Z-1 & Z-2)
-
-
-
Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m.
as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. a)Depth of excavation not exceeding 1500 mm
93.12
119
11106.42
Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powered earth or local sand.
112.92
324
36586.08
Cement concrete with graded stone ballast (30 mm size excluding shuttering) a) 1:3:6 proportion in ground floor & foundation.
(A)NB variety
10.4
3573
37168.87
Ordinary cement concrete (1:1.5:3) with graded stone chips (20 mm size) nominal size excluding shuttering and reinforcement , if any in ground floor as per relevant IS Code. (a)Pakur variety
17.2
6061
104249.2
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
Do - by fine sand
84.8
753
63934.11
Brick work with 1st class brick in Cement Morter. (1:6)
-
-
-
a) In foundation and plinth .
19.74
4849
95729.33
b)In superstructure ground floor (1:6)
25.72
5072
130464.96
125 mm thick brickwork with 1st class bricks in cement mortar (1:4) in ground floor
25.72
666
17136.46
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. A) With earth obtained from excavation of foundation.
7.2
77
558.29
Hire and labour charges for shuttering with centering and necessary staging upto 4 mtr using approved about props and thick hard wood planks of approved thickness with required bracing for concrete slabs , beams,columns,lintels,curved or straight including fitting, fixing & striking out after completion of works(upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-charge.
124
328
40672
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. , initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. a)For works in foundation basement upto roof of ground floor/upto 4 m . i)Tor Steel /Mild Steel I. SAIL/ TATA/RINL
1.48
60722
89869.11
25 mm thick Damp proof course with cement concrete with stone chips (3:1.5:1))(with graded stone aggregates 10 mm normal size)and painting the top surface with a coat of bitumen using 1.7 kg per sq m including heating the bitumen and cost and carriage of all materials complete.
13.6
262
3576.26
Artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rouding off corners and including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m. all complete including all materials and labour. In ground floor 3 mm thick topping (high )polishing,grinding on this item is not permitted with ordinary cement). i) 25 mm thick.
49.2
262
12928.28
Neat cement punning about 1.5mm thick in wall, dado, window, ceiling, floor, drain etc.
57.2
32
1871.58
Plaster (to wall, floor, ceiling etc)with sand & cement mortar includg rounding off or chamfering corners as directed a ramming out joints or roughening of concrete surface by chamfering etc. including threading noising and drip course where necessary.(Ground Floor)
-
-
-
i) With 1:6 cement mortar
-
-
-
a) 20 mm thick to inside wall
244.72
157
38572.77
b) 15 mm thick plaster
224.56
138
31092.58
ii) With 1:4 cement mortar
-
-
-
ii) 10 mm thick cement plaster
84.56
123
10439.78
Woodwork in door and window frame fitted and fixed complete including a protective coat of painting at the contract surface of the frame. A) Sal (local)
0.1
71907
7190.7
Panel shutter for door and window as per design (Each panel consisting of single plank without joint)including fitting & fixing the same in position but excluding the cost of hinge and other fitting in Ground Floor(In case of non supply of single plank,penal rate of reduction of 20% will be made) 40 mm thick shutters with 19 mm thick pane of size 30 to 45 cm. sishu/Gamar/Champ/Badam/Bhola/Mogra/Hallak
4.4
2968
13059.2
Supplying fitting, fixing- Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.
[The extra rate admissible for the openable portion only] (p-82,i-33)
14.4
2199
31665.6
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than
150mm apart complete in all respect as per design including cost of all labour and materials
11.6
1304
15126.4
M.S. or W.I. ornamental grill of approved design,joints continuously welded with M.S. WI flats and bats for winding,drilling etc.fitted & fixed with necessary screw and lugs in ground floor. a)Grill weighing above 10 Kg/Sqm upto 16 Kg/Sqm (in Kg)
5.2
10021
52109.2
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (Plastered or concrete surface)as per manufacture's specification in ground floor. A) Two Coats (on new cement plaster surface)
197.52
49
9678.48
White washing including cleaning and smoothening surface thoroughly. A) 3 Coats.
318.6
20
6375.19
a)Priming one coat of timber, plastered surface with synthetic enamel/oil bound primer of approved quality including smoothening surface by sand papering etc.
12.72
38
483.36
b) on steel or other metal surface
84
29
2436
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of a approved putty etc on the surface if necessary
-
-
-
a) On timber or plastered surface (with other than hi gloss of approved quality). i) 2 Coats (with any shade except white)
15.72
81
1273.32
b) On steel or other metal surface (with other than hi gloss of approved quality). i) 2 coats (with any shade except white)
84
77
6468
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length
16
29
464
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
-
-
-
a) 75 mm x 60 mm x 3.15 mm
16
47
752
b) 100 mm x 75 mm x 3.50 mm
16
66
1056
Iron door ring of approved quality fitted and fixed with nut and washer complete. A) 50 mm dia.
4
17
68
Iron socket bolt of approved quality fitted and fixed complete.
-
-
-
A) 150 mm long x 10 mm dia bolt.
8
63
504
B) 300 mm long x 10 mm dia bolt.
8
95
760
Iron Hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm. dia rod with centre bolt and round fitting. - 300 mm. long.
6
166
996
Iron catch hook of approved quality fitted and fixed to shutter and chowkat, (a)6 mm dia x 225 mm long
24
64
1536
Number Plaque of buildings (Plaque size upto 225 mm x 225mm ) made of cement plaster(2:1)on face of wall or plinth , with 50 mm size letters P.H.E. and the number of the structure formed thereon (in sunk type)including painting the letters complete as per direction. (Cement = 1 Kg/No )
36
110
3960
R.C. shelves (1:1.5:3)) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8 % main and 0.2% distribution bars), shuttering etc. and 6 mm. thick cement plaster (4:1) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages necessary complete. In ground floor (a) 37.5 mm thick panels . I. SAIL/TATA/RINL
2
586
1172
Band moulding (horizontal-verticle) rectangular section made with cement plaster 1:4 complete. i) Projection upto 25 mm a)Depth or Width 75 mm to 100 mm.
52
36
1872
Renewing throating,nosing or drip course moulding with 15 mm thick cement plaster(1:4)complete.(cement 0.7 kg/mtr.) In ground floor.
16
18
288
Supplying,fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings . (tested to 21 kg/sq.cm.) (for water lines only).- 15 mm. dia.
8
521
4168
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code
(i) For 10 users
A) With Pakur variety. (SAIL/TATA/RINL)
2
33483
66966
Supplying, fitting & fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make supplied ,fitted fixed in position complete excluding P or S trap.(excluding cost of concrete for fitting) i) 530mm x 410 mm
4
1522
6088
supplying fitting and fixing 10 litre PVC low-down cistern of conforming to I.S. specification with PVC fitting complete C.I. make with either side or bottom brackets including two coats of painting to brackets.
4
1015
4060
Supplying PVC water storage tank of approved quality with closed lid (Black)-Multilayer. A) 500 litre capacity.
4
2584
10336
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (SAIL/TATA/RINL)
2
15584
31168
Saucer drain up to 150 mm width and 75mm depth including cement plaster(3:1) and neat cement finishing. (cement=224.0 Kg/100 mtr)
32
31
997.44
Supplying, fitting & fixing UPVC pipes A-type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures et. If necessary and mending good damages including joining with jointing materials (Spun yarn, Valamoid / Bitumen / M-Seal etc) complete. (a) 75mm. dia.
44
188
8272
Supplying fitting & fixinng with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.5 mtrs depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides) (i) 100 mm dia
32
294
9408
Drilling and tapping C.I. main.- upto 15 mm. dia.
4
160
640
Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers,including fitting & fixing complete.
4
1081
4324
Supplying,fitting and fixing Fan Hook for ceiling with 1 metre long 16mm dia rod complete including mending damages .Payment for damage and repair to be made separately.
8
100
800
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.
(i) 450 mm X 300 mm
4
367
1468
Wash basin white vitreous china of approved make(without fittings)supplied , fitted and fixed in position on 75mm x 75mm x 75mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (a) 450 mm x 300 mm size.
4
1155
4620
supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible,with both ends coupling with heavy brass C.P. nut,15 mm dia. (a)900 mm long.
4
147
588
Cutting holes and subsequent mending good damages.
8
68
544
Supplying , fitting and fixing 30 mm. thick both side prelaminated factory made solid panel PVC door shutter consisting of outer frame made out of MS tubes of 19 gauge thickness and size 19 mm. x 19 mm. for styles, top and bottom rails, MS frame shalll have cost of steelprimers of approved make and manufacture, M.S frame cover with 5 mm. thick head moulded PVC " C" channel of size 30 mm. thick 70mm. width out of which 50 mm. shall beflat and 20mm. shall be tapered in 45 degree angle of either side forming styles, and 5mm thick 95 mm. wide PVC sheet out of which 75 mm. shall be flat and 20 mm. tapered in 45 degree on the inner side to form top & bottom rail and 115mm.wide PVC sheet out of which 75 mm. shall be flat and 20 mm. shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel with 10mm. ( 5mm. x 2 mm. ) thick , 20 mm. wide cross PVC sheet as gap insert for top rail and botttom rail sheet to be fitted in the M.S frame weled / sealed to the styles & rails with 7 mm. ( 5mm. + 2 mm. ) thick x 15 mm. wide PVC sheet beading on inner side and joint together with solvent cement adhesive . An additional 5 mm. thick PVC strip of 20 mm. which is to be stuck on the interior side of the "C" channel using PVC solvent adhesive etc. com excluding all necessary hardwire as per direction of the E.I.C in ground floor.
5.2
1943
10103.6
Supplying fitting approved type ventilator in position after cutting holes in walls,setting in cement mortar,mending damages to wall and plaster and two coats of paint of approved brand sand shade .Payment of mending two damages of wall & plaster and painting to be made separately.
-
-
-
R.C.C. ventilator of 20 mm thick - upto 0.10 sq.m. area
16
108
1728
Constructing inspection pit of inside measurement 600 mm x 600 mm x upto 600 mm (depth)with 250 mm thick 1st class brick work in cement mortar (1:4)on all sides ,bottom of the pit consisting of 100 mm thick cement concrete(1:3:6)with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4)cement plaster to inside walls and outside walls upto GL and 20 mm thick (1:4)plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6)with stone chips as per direction,neat cement finishing to entire internal surfaces,top of the pit covered with 100 mm thick RCC slab (1:1.5:3)with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster(1:4) in all external surfaces of the slab and one 560 mm dia RCC manhole cover of approved make supplied,fitted and fixed in the slab with necessary fittings,necessary earth work in excavation in all sorts of soil,filling sides of the pit with earth and removing spoils after work complete in all respects with all costs of labour and materials. -with pakur variety.
2
6471
12942
Supplying , fitting and fixing cast iron 'p' or 's' trap conforming to I.S. 3989/1970 and 1729/1964 including lead caulked joints and painting two coats to the exposed surface.(painting to be paid seperately).- 'S' Trap - 100 mm.
4
803
3212
Supplying,fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.(payment will be made on the centre line measurements of total pipe line including all specials.No separate payment will be made for accessories,specials,payment for painting will be made separately)
-
-
-
a)15 mm dia medium quality
48
192
9216
b)20 mm dia medium quality
36
226
8136
Supplying,fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq.cm. - 15 mm. dia.
8
169
1352
Supplying,fitting and fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete.(Payment of painting will however be paid seperately).- 100 mm dia.
4
367
1468
Supplying,fitting and fixing pillar cock of approved make. A)i)CP Pillar Cock-15 mm (equivalent to code no-507 & Model - Tropical/sumthing special of ESSCO or similar brand).
4
555
2220
Surging and Maintenance of Tube Well (04 nos.)
-
-
-
Cleaning of annular space (1.2 metre dia) arround housing pipe by excavation for exposing the top of gravel layer, including making shoring and shuttering arrangement as necessary and removing the spoils to a safe distance all complete as per direction of the Engineer-in-Charge. (Measurement to be taken as depth excavated from floor level of pump house).
124
466
57878.24
Charges for placing 1.2 metre dia. 300 mm. wide,65 mm thick R.C.C. well ring made with cement concrete 1:1.5:3 with stone chips and 0.8% reinforcement (including the cost of shuttering and reinforcement) cast at site in the annular space around the housing pipe, including supplying the rings at site-all complete as per direction of the Engineer-in-Charge
124
2093
259575.4
Supply of acid component including all taxes and charge and carrying cost at site.
a) Sulphamic Acid
20
89
1791.6
b) Calcium Hypochlorite
20
70
1414.4
c) Sodium Hexamate Phospate
20
80
1603
Labour charges for pouring the acid in requisite quantities in perforated polythine one cloth bag & submersing the bags within the tube well at different stages of strainer with the help of string overnight, weeping and their mixing and string the acid with surge block by air Compressor (including back pressure) L. S.
4
1471
5887.76
Development of tubewell with not less than 350 cfm 150 psi capacity air compressor by surging and back washing for minimum 12 hrs including lowering of eduction pipe, air pipe etc. upto required depth as per direction of Engineer-inCharge including hire and transport charge of Air compressor and other necessary tool and plants and also cost of fuel/lubricants for air compressor.
48
1091
52413.12
Supply of gravel for use as pack in tube well of 2 mm to 4 mm. size and gravel treatment of tubewell (as per IS: 4097/ 1967) including screening, washing, cleaning etc. of the gravels at the site, all complete as per direction of the Engineer-in-Charge
63.92
2227
142365.82
Labour charges & other charges for lowering of drop pipe 7.5 cm. or 10 cm. dia for choke clearance & detection of parted point (for parted tubewell) on fitting necessary flanges buckets & other attachment as may be required & withdrawing of the same after completion of work as many lifting & lowering required during the work without damaging any departmental material including lowering of sounding wire time to time as and when required. This includes labour & other charges for erection of scaffolding for lowering & withdrawing drop pipe.
(i) Upto 60 metre depth.
240
41
9957.6
(ii) Beyond 60 metres upto 150 metres.
240
45
10862.4
Labour charges & other charges for clearing of parted particle like sand and gravel & foreign materials like brick bats etc. if any from inside the tubewell assembly from different depth adopting suitable method including use of suitable type of cutter for loosening & breaking the deposited materials on subsequent operation of air compressor of suitable capacity with gradual & time to time lowering of compressor pipes, drop pipes etc. for required hours till the chockage is cleared upto the satisfaction of Engineer-in-Charge. (The rate included all labour charges & running cost of machinery but excluding lowering of drop pipe & other tools and plants but included labour charges for lower cutter, air pipe etc. to the required depth as needed.
(i) Upto 60 metre depth.
240
238
57256.8
(ii) Beyond 60 metres upto 150 metres.
240
285
68570.4
Labour charges & other charges for pouring water (if required in side the tubewell for operation of air compressor during chemical treatment from outside the surface by any means including drawing pipe line or excavation earth channel hire charges of tools & plants etc. complete.
4
1006
4024.52
Making of capsule for sealing parted portion at reducer on cutting required length upto 10ft. from 6 inches dia. Pipe (to be supplied departmentally) including supplying fixing of 2 nos., 2 inch, W'to 1" width rubber ring 7.5 inches o.d. in between two M.S. on one end of the pipe & fizing of one flange at middle position of pipe having outer dia. more than 8 inches but less than 11 inch. and also fixing of 2 nos. M.S. flanges type plate having other Y4inch. less than inner dia. of housing pipe and setting of one to two nos. rubber packing ~ inch. to 1 inch. thick and suitable outer dia. (lust below the inner dia.) of housing on the other end of pipe as per direction. The capsul should be prepared in such way so that it can guard the parted portion effectively and at the same time it can move through the assembly easily complying optimum pressure and also it rest on the reducer freely. (The rate including cut ting charges necessary welding, threading,matching and including supplying of two nos. M.S. ring, one no. M.S. flange, two nos. M.S. flange type plate, necessary rubber packing ring of suitable dia.and thickness, necessary rubberpacking ring of suitable dia and thickness necessary provision for lowering capsul and includes all necessary carriage departmental stores to workshop and to work site all complete.
4
1946
7785
Labour charges & other charges for lowering of sealing a capsul within the housing / reducer with the help of 8 mm dia wire rope or by any other arrangements on employing optimum thrust with the help of 3 inch. dia of pipe & placing the capsul in proper position to guard the parted portion effectively Each Tubewell 558.23 including all the hire charges of tools & plants & labour charges & other incidental charges etc. all complete (payment will be made only after effective sealing of
Iparted zone).
4
558
2232.92
(i) Supplying of flexible wire rope of good quality 6 mm dia. at site.
164
16
2783.08
(ii) Supplying suitable size dog clamp.
40
12
490.4
Manufacturing of 160/140/110 mm dia. PVC. strainer by making slot of suitable size as per design on the body of the PVC. pipe covering same with good quality nylon net and closerly winding the same with good quality of coir rope (PVC. pipe to be supplied by their department) includinq all labour & transportation charges complete.
104
219
22849.84
Manufacturing of 160/140/110 mm dia. PVC. strainer by making slot of suitable size as per design on the body of the PVC. pipe covering same with good quality nylon net and closerly winding the same with good quality of coir rope (PVC. Mtr. 11.32 pipe to be supplied by their department) including all labour & transportation charqes complete.
104
11
1177.28
E/M work of 2 nos existing Deep Tube Well and 1 no new Tubewell including 5 years Operation and Maintenance of whole systm in Zone-1
Supply & delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS: 8034 (and as amended thereafter) with standard MOC for potable clear cold water and BEE 3 star rated capable of discharging 45 m³/hr against 62 mtr head of water column. The pump shall be directly coupled with a continuous rated 2 pole suitble wet type vertical squirel cage induction motr conforming to IS: 9283 (and as amended therafter), suitable for operation in AC three phase 415 V, 50 hz (category B motor).Ref - PHED SCHEDULE 2021, Pg No-16, Sr No - 168
2
87682
175364
Supply & delivery of pumping machinery submersible pump excluding panel for unmannned operation, MK-Texmo/KSB/MBHb) 11HP TO 15 HP inclusive of column pipe, valves specials submersible cable connection from motor to starter. Ref-PHE 2013, Pg no-32
1
350000
350000
Supply, Delivery & installation of 415 V, 3 Phase 50 hz Auto-manual upto 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC.
3
94666
283998
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 25 sq mm confirming to IS: 1554/7098(Part-1)-1988. Make-Havells or equivalent.
60
327
19620
Supply of Insulating rubber mat of size 3' x 6'.
27
163
4421.79
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge without reguulator with all accessories.
3
1791
5373
S&F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves.
6
559
3355.8
S&F of safety clamp for the P/M Set 6 mm x 40 mm section.
3
380
1140.9
S&F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories.
3
800
2400
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry.
3
1031
3093
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.
6
250
1500
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete.
9
152
1368
S& F of protectin device comprisin of wire rope clams etc.
3
1830
5491.2
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of Etc.
24
343
8232
Installation of pumping machinery with valves, pipe & pipe specials short piece. depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connectin complete as per direction including supply of necessary materials as req.for the work.
3
5000
15000
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora.
3
7574
22722
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora.
3
655
1965
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm.
18
173
3114
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3 1/2 core.
18
169
3042
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, leveling up and restoring surface duly rammed.
45
319
14355
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG Gl (hot dip) wire making holes etc. as necessary mending good damages and painting.
15
78
1170
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted lass on wall/ceillin incl. 8 Watt CFLJ100watts GLS lamp complete set.
6
674
4044
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
3
1375
4125
S&F at site of TW single board size 14" x 16".
6
61
369
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required.
12
29
348
supply & Fixing 240 V 16120 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connection as required.
12
84
1008
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspexwire cover and making necessary connections with PVC wire and earth continuty wire etc.
3
84
252
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete, Mk- Phillips/C.G or any reputed make as per direction of EIC.
6
4218
25312.5
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia Gl pipe bracket, clamp, nut & bolts etc.
3
1938
5814
Distribution wiring in 1.1 KV grade 2x22/O.3 (1.5) sqmm) single core stranded 'FRI PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with Ix22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr.
24
742
17808
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
3
2018
6054
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG Gl (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm tong GI bolts. double nuts, double washers incl. S & F 15 mm dia Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the round level B TATA- Medium Gl pipe.
9
1786
16081.2
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolts nuts washers spacing insulators etc. as re uired.
6
170
1020
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
30
20
600
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
36
490
17640
Erection of glowin plastic sign board for identification mark as per direction of EIC.
36
287
10332
Supply & fixing, fitting of lightning arrestor/conductor of G.l stick of size Ix5 Mtr long x 25 mm dia with flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as er direction of EIC.
3
920
2760
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with Gl shaddles as required and making connection to equiments with bolts nuts and washers etc.
45
114
5130
Supply and installation of Injector/Diaphragm type Automatically feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0-100 lp h 10 kg/cm2 test ressure. PHE- 2013 P-33.
1
150000
150000
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adequate number of working personnel for round the clock operation as per reuiremnt, secification & direction of E.I.C.
60
36890
2213400
E/M work of 2 nos existing Deep Tube Well and 1 no new Tubewell including 5 years Operation and Maintenance of whole systm in Zone-2
Supply & delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS: 8034 (and as amended thereafter) with standard MOC for potable clear cold water and BEE 3 star rated capable of discharging 40 m³/hr against 65 mtr head of water column. The pump shall be directly coupled with a continuous rated 2 pole suitble wet type vertical squirel cage induction motr conforming to IS: 9283 (and as amended therafter), suitable for operation in AC three phase 415 V, 50 hz (category B motor).Ref - PHED SCHEDULE 2021, Pg No-16, Sr No - 168
2
87682
175364
Supply & delivery of puming machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBHb) 6HP to 10HP inclusive of column pipe, valves special submersible cable connection from motor to starter.
1
350000
350000
Supply, Delivery & installation of 415 V, 3 Phase 50 hz Auto-manual upto 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC.
3
94666
283998
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 25 sq mm confirming to IS: 1554/7098(Part-1)-1988. Make-Havells or equivalent.
60
327
19620
Supply of Insulating rubber mat of size 3' x 6'.
27
163
4421.79
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge without reguulator with all accessories.
3
1791
5373
S&F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves.
6
559
3355.8
S&F of safety clamp for the P/M Set 6 mm x 40 mm section.
3
380
1140.9
S&F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories.
3
800
2400
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry.
3
1031
3093
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.
6
250
1500
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete.
9
152
1368
S& F of protectin device comprisin of wire rope clams etc.
3
1830
5491.2
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of Etc.
24
343
8232
Installation of pumping machinery with valves, pipe & pipe specials short piece. depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connectin complete as per direction including supply of necessary materials as req.for the work.
3
5000
15000
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora.
3
7574
22722
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora.
3
655
1965
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm.
18
173
3114
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3 1/2 core.
18
169
3042
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, leveling up and restoring surface duly rammed.
45
319
14355
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG Gl (hot dip) wire making holes etc. as necessary mending good damages and painting.
15
78
1170
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted lass on wall/ceillin incl. 8 Watt CFLJ100watts GLS lamp complete set.
6
674
4044
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
3
1375
4125
S&F at site of TW single board size 14" x 16".
6
61
369
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required.
12
29
348
supply & Fixing 240 V 16120 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connection as required.
12
84
1008
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspexwire cover and making necessary connections with PVC wire and earth continuty wire etc.
3
84
252
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete, Mk- Phillips/C.G or any reputed make as per direction of EIC.
6
4218
25312.5
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia Gl pipe bracket, clamp, nut & bolts etc.
3
1938
5814
Distribution wiring in 1.1 KV grade 2x22/O.3 (1.5) sqmm) single core stranded 'FRI PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with Ix22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr.
24
742
17808
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
3
2018
6054
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG Gl (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm tong GI bolts. double nuts, double washers incl. S & F 15 mm dia Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the round level B TATA- Medium Gl pipe.
9
1786
16081.2
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolts nuts washers spacing insulators etc. as required.
6
170
1020
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
30
20
600
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
36
490
17640
Erection of glowin plastic sign board for identification mark as per direction of EIC.
36
287
10332
Supply & fixing, fitting of lightning arrestor/conductor of G.l stick of size Ix5 Mtr long x 25 mm dia with flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as er direction of EIC.
3
920
2760
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with Gl shaddles as required and making connection to equiments with bolts nuts and washers etc.
45
114
5130
Supply and installation of Injector/Diaphragm type Automatically feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0-100 lp h 10 kg/cm2 test ressure. PHE- 2013 P-33.
1
150000
150000
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adequate number of working personnel for round the clock operation as per reuiremnt, secification & direction of E.I.C.
60
36890
2213400
Add G.S.T. @ 18.00%
1
1861549
1861549.01
Labour Welfare CESS @ 1.00 %
1
122034
122034.88
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%