Municipal Affairs Department Tender

Hire charges of lighting generator of capacity 5KVA including fuel, mobil, operator, carriage etc. including all complete for water supply works. For minimum engagement of 8 hrs. in a day

Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane (for diameter above 250 mm) by providing temporary support, as required, gaskets, nuts & bolts etc. all cornplete as per specification and direction of the Engineer-in-charge. [The rate Includes cost of flange joints] 100mm dia

150mm dia

Wet connection with M.S. saddle on running mains by drilling with electric drill, plugging with wooden plug, using nuts and bolts, rubber insertion, dewatering trenches all complete excluding cost of M.S. saddle & Earthwork. 12in /4in dia

Carrying CI/DI pipes with specials and valves and lowering placing in position and laying carefully inside the trenches in proper alignmentand gradientetc.including earth work in excavation of adequate width as per specification having min. clear cover from top of pipe is 1.10mtr. below existing ground level in any kind of soil including mixed with boulder, road sub grade  and  its  flank,but  excluding moorum and laterite and stone etc.withoutdamagingtheexisitingtelephone/electriccableetc.(incaseof damaged if any type of cable line during excecution , necessary damage dcharges as applicable by there spectiveauthoritywillbeborne by the agency in his own cost) preparing the bottom surface for continuous bedding of pipe line and laying pipes, fitting, fixing specials and valves with bailing out water if any including carriage of pipes, special sand valves from local deptt.store within 8KMandbackfillingthe trenches with excavated earth in layers to original condition as per specification and direction of EIC. The surplus materials after execution of  work  are to  be return  to the  deptt. store. N.B: i) Any deviation from required clear cover of 1.10mtr., due to site adverse condition, prior permission is to be obtained from the EIC in exceptional situation and payment will be made on prorate basis over the rate of entire item ii) No payment will be made without hydraulic test of the pipe line either part or full  iii)Thepipes, specialsand valves , rubbergasket willbe supplieddeptt. free of cost.  150mm dia.

Dismantling all type of plain cement concrete works, stacking serviceable materials of site and removing rubbish as directed within a lead of 75mtr. for laying all dia pipe line in ground floor, upto 150mm thick.

Supplying, fitting and fixing of C.I. Mechanical Compression Long Sleeve Collar Coupling (popularly known as Cut-N-Repair Coupling) suitable for jointing C.I. Spun Pipes (as per IS: 1536) and D.I. Pipes (as per IS: 8329) with BS:1211 Class-B Pipes. The Couplings will be supplied complete with Sealing Rubber Gasket of EPDM quality (IS:5382/1985 Type-4), Cast Iron Follower Glands and Mild Steel (Zinc Coated) Nut Bolts . The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538. Fitting and fixing should be in proper position with proper care of main pipe line for leak proof condition. 150mm with length 300mm

Supplying, fitting and fixing of C.I. Mechanical flexible Flange Socket Tailpiece suitable for making flanged connection with the plain barrel of C.I. Spun Pipes (as per IS : 1536) and D.I. Pipes (as per IS : 8329). The Tailpieces to be supplied complete with Sealing Rubber Gasket of EPDM quality (IS:5382/1985 Type-4), Cast Iron Follower Glands and Mild Steel Nut Bolts (Zinc Coated). The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538. Fitting and fixing should be in proper position with proper care of main pipe line for leak proof condition. 150mm with length 100mm

GST 18% =Rs.

Labour Cess 1 % = Rs.