Municipal Affairs Department Tender
... More
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Municipal Affairs Department - MAD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date27 Feb 2025
Closing Date18 Mar 2025
Tender Amount₹ 40,69,954
Costs
EMD
₹ 81,399Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MAD_821103_3Tender No
WBMAD/EE(EM)/NIeT-08/24-25Tender Authority
Municipal Affairs Department ViewPurchaser Address
-Website
http://http://www.wburbanservices.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring
shoring.
15.26
19238
2935.72
... More
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.( Payment to be made on the basis of measurement of finished quantity of work )
a) With earth obtained from excavation of foundation.
97.63
7754
7570.23
... More
Supplying Sal-bullah piles at work site, including
dressing and making one end pointed
iii) 150mm diameter
639
263
168057
... More
Labour for driving Sal-bullah / Eucalyptus bullah
piles by monkey in sorts of soil including hoisting and
placing piles in position, protecting the pile head
with iron ring and cutting and shaping heads before
and after driving and including hire and labour for
necessary driving appliances and all tackles.
(iii) 150mm diameter
639
105
67095
... More
Coal tarring on wooden surfaces including cost of
materials.
(a) Double coat.
542.59
36
19533.24
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity).
15.26
85173
12997.4
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
148.46
24
3563.04
... More
Single Brick Flat Soling of picket jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
12
348
4176
... More
Cement concrete with graded Stone ballast (40 mm.) excluding shuttering.a) In ground floor and foundation.
6 : 3 : 1 proportion Pakur variety
7.09
4609
32681.5
... More
Brick work with 1st class bricks in cement mortar (6:1)
b) In super structure
-
-
-
... More
1st Floor
18.62
5486
102150.25
... More
2nd Floor
17.33
5597
96996.88
... More
3rd Floor
7.34
5708
41897.09
... More
125mm thick brick work with 1st. class bricks in cement mortar (4:1).
-
-
-
... More
1st Floor
64.73
716
46380.99
... More
2nd Floor
61.56
728
44848.31
... More
3rd Floor
29.22
740
21638.29
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety
-
-
-
... More
Ground Floor
32.69
5543
181220.61
... More
1st Floor
24.73
5638
139442.83
... More
2nd Floor
21.87
5733
125394.05
... More
3rd Floor
5.74
5828
33456.22
... More
Reinforcements for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every inter-section, complete as per drawing and direction. (i) JSW/JSPL/SHYAM /SRMB/ELECTROSTEEL/SSL/BMASL(Tor Steel/ HYSD)
-
-
-
... More
(a) For works in foundation, basement and upto roof of ground floor / upto 4m.
3.85
54917
211433.8
... More
1st Floor
2.43
55347
134495.32
... More
2nd Floor
2.15
55777
119922.42
... More
3rd Floor
0.56
56207
31476.41
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor). (When the height of a particular floor is more than 4 m. the equivalent floor ht. shall be taken as 4 m. and extra for works beyond the initial 4 m. ht. shall be allowed under 12(e) for every 4 m. or part thereof.)
-
-
-
... More
(f) 25 mm to 30 mm shuttering without staging in foundation
19.79
205
4056.95
... More
a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
31.47
324
10196.28
... More
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
In Ground Floor
143.93
359
51670.87
... More
1st Floor
140.2
377
52855.4
... More
2nd Floor
129.81
395
51274.95
... More
3rd Floor
43.7
413
18048.1
... More
Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary . [Excluding cost of chipping over concrete surface]
-
-
-
... More
A) With 6:1 cement mortar.
a) Inside wall 20 mm thick plaster In ground floor.
39.82
155
6201.17
... More
In First Floor
251.21
159
40125.77
... More
In Second Floor
238.09
163
38982.48
... More
In 3rd Floor
41.76
167
7004.4
... More
b) Out side Wall, 15mm th.
1st Floor
150.42
140
21141.53
... More
2nd Floor
138.99
144
20091
... More
3rd Floor
97.4
148
14468.77
... More
Inside wall of 1500 lits. Capacity water tank
15 mm thick (1:4) cement plaster
6
151
907.44
... More
B)10mm th celling plaster (4:1)
Ground Floor
64.91
122
7954.72
... More
1st Floor
76.53
126
9684.87
... More
2nd Floor
64.91
130
8474
... More
3rd Floor
12.94
134
1741.08
... More
Labour for Chipping of concrete surface before taking up
Plastering work.
300
21
6300
... More
Neat cement punning about 1.5mm thick in wall, dado, window, sills, floor, drain etc.
43.68
32
1430.52
... More
Supplying, fitting & fixing MS clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1)a fitted and fixed omplete as per direction.
40mm x 6mm x 125 mm length.
(Cost of cement concrete will be paid separately)
36
20
720
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals)..
(d) Sal : Local.
-
-
-
... More
First Floor
0.19
73154
13899.26
... More
2nd Floor
0.11
73354
8068.94
... More
3rd Floor
0.04
73554
2942.16
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings.
(b) 32 mm thick shutters (single leaf).
-
-
-
... More
First Floor
9.14
2373
21689.22
... More
2nd Floor
5.67
2387
13534.29
... More
Third Floor
1.58
2401
3793.58
... More
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge.( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc)
10-12 Micron thickness Annodizing film
Natural white
[Note : for estimate purpose construction wing may consider weight of Aluminium door @ 9.0 Kg per Sq.M]
22.68
385
8731.8
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
vi) 6mm thick coloured / tinted / smoke glass.
26.55
661
17549.55
... More
Providing, fitting and fixing in position, medium density fibre board conforming to IS: 12406-1988 for plain and IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade and Phenol Formaldehyde for exterior grade conforming to per IS:848-1974 as per approved make and brand as per direction of Engineer-in-Charge.
(C) Both side decorative lamination
(II) Interior Grade
(i) 8mm
In 1stFloor
1.26
826
1040.76
... More
(A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.
1
635
635
... More
(C) Supplying Heavy Duty Aluminium Handle (EBCO Type)
(Natural White)
2
96
192
... More
(a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.
1
1081
1081
... More
(ii) Door stopper (Anodised aluminium)
8
70
560
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
(A) In 10-12 Micron thickness Annodizing film
I) Natural white
g) Fixed glazing.
i) Top, bottom and side member.
9
321
2889
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
iv ) Fixed glazing
1.62
768
1244.16
... More
Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. i) For sliding windows
a) ' U' shaped EPDM gasket for frames.
9
15
135
... More
Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.
19.8
305
6039
... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as perdirection of Engineer-in-Charge.
-
-
-
... More
In First Floor
3.15
1957
6164.55
... More
In second Floor
3.15
1971
6208.65
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
-
-
-
... More
In Ground Floor
0.72
2225
1602.28
... More
In First Floor
0.72
2252
1621.5
... More
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.
10-12 Micron thickness Annodizing film
Natural white
[Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]
137.12
448
61429.76
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. a)75mm x 47mm x 1.70mm
27
31
837
... More
Iron Socket Bolt of approved quality fitted and fixed complete. i) 150 mm long x 10 mm dia
9
63
567
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
(c) 300mm long.
9
166
1494
... More
Anodised aliminium D-type handle of approved quality manufactured fromextruded section conforming to I.S. specification (I.S. 230/72) fitted and fixedcomplete:
(b) With round base:
(iv) 150 mm grip x 10 mm dia rod.
18
86
1548
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
Grill weighing 10 kg/sq m to16 kg/m2
-
-
-
... More
In First Floor
1.8
9986
17976.38
... More
In Second Floor
1.84
10086
18559.62
... More
In 3rd Floor
0.04
10187
407.5
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both+B151 faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.
1.89
1304
2464.56
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.
In ground floor.
3.15
4373
13775.9
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
750.35
122
91542.7
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.
Two Coats
750.35
70
52524.5
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
(b) Two Coats
-
-
-
... More
1st Floor
150.42
45
6890.74
... More
2nd Floor
138.99
46
6465.81
... More
3rd Floor
97.4
47
4600.2
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Normal Acrylic Emulsion
-
-
-
... More
1st Floor
150.42
67
10184.94
... More
2nd Floor
138.99
68
9509.7
... More
3rd Floor
97.4
69
6733.26
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
52.81
29
1531.49
... More
b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
17.64
38
670.32
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With super gloss (hi-gloss)-With any shade except white.
-
-
-
... More
a) On timber or plastered surface Two Coats
17.64
81
1428.84
... More
b) On Steel surface Two Coats
52.81
79
4171.99
... More
Supplying, fitting and fixing UPVC down pipes A type and fittings conforming to IS 13592-1992 with necessary clamps nails including making holes in walls, etc. and cutting trenches in any soil, through masonry concrete structure etc. if necessary and mending good damages including jointing with jointing materials ( Spun yarn, valamoid / bitumen / M. seal etc.) complete.
-
-
-
... More
i) UPVC Pipe 110 mm dia
28
251
7028
... More
ii) UPVC Bend 87.5 degree 110 mm dia
12
160
1920
... More
iii) UPVC Shoe 110 mm
12
111
1332
... More
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous& Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
b) Sizes 600 mm x600mm x10 mm with breaking strength 1500 N
-
-
-
... More
In First Floor
7.94
1593
12649.85
... More
In Second Floor
7.94
1605
12745.13
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
(B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) (b) Area of each tile above 0.09 Sq.m ii) Other than Coloured decorative including white
-
-
-
... More
In First Floor
58
1032
59860.06
... More
In Second Floor
55
1032
56763.85
... More
Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]
Red Variety
(i) 25 mm. thick
11.58
451
5230.34
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy
grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]
(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand
cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.
(B) Light Colour
-
-
-
... More
In First Floor
60
1264
75850.8
... More
In Second Floor
55
1269
69804.9
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
-
-
-
... More
In First Floor
8
1011
8089.44
... More
In Second Floor
8
1023
8185.44
... More
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and forjointing @1.8 kg/Sq.m]
-
-
-
... More
In First Floor
3.03
1152
3493.38
... More
In Second Floor
3.03
1164
3529.74
... More
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.
39
224
8736
... More
Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps.
23
209
4807
... More
Roof treatment by application of non toxic polyurethane modified acrylic based single component (P U Roof Coat) solvent free, cold applied polyurethane modified elastomeric waterproofing membrane with excellant UV resistant capasity as per ASTM D6083 [a water based 100% acrylic elastomeric emulsion polymer latex coating used as protective coating for roofs] after preparing the surface by cleaning and repairing the roof cracks by cement & sand mortar (1:4), preferably with antishrinkage mortar (to be paid separately) if any, apply two coats along with a Priming coat (two coats of P U Roof Coat and one coat of primer coat compatible with main product as per manufacturers specification) and reinforced with or without 20gsm Geotextile Fleece, including the cost of primer coat and base preparation, tools & plants but excluding the cost of scaffolding and stagging complete as per direction of Engineer -in-charge.(Note: If Geotextile Fleece not uesd ,the rate would be reduced by Rs. 5/-per Sqm)
64.91
430
27938.56
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx).
4.2
9077
38123.4
... More
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface.
144.65
580
838.97
... More
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made byadding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. ii) For other Structural works like galleries etc.
0.5
74900
37450
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete
as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item
should be executed on specific direction of the Enginner in charge).
-
-
-
... More
(a) Depth upto 1.5 m.
49.88
375
18705
... More
(b) For additional depth beyond 1.5 m. and upto 3.00 m
9.98
428
4271.44
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (i) CPVC Pipes Class-1, SDR-11
-
-
-
... More
a) For Exposed Work
20 MM DIA
27
143
3861
... More
32 MM DIA
15
283
4245
... More
40 MM DIA
15
403
6045
... More
(b) For Concealed Work 15 mm Dia
40
140
5600
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. markng with fittings(tested to 21 kg/sq.cm.).
-
-
-
... More
20 MM DIA
4
657
2628
... More
32 MM DIA
2
1258
2516
... More
40 MM DIA
2
1646
3292
... More
Supplying, fitting and fixing bib cock or stop cock.
-
-
-
... More
a(i) Chromium plated Bib Cock short with wall flange with aerator (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
8
539
4312
... More
B(i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
8
493
3944
... More
D(i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
4
815
3260
... More
Suppling,fitting & fixing E.W.C in white glazed vitreous china ware of approved make supplied fittied complete in position with necessary bolts nuts.etc.
a)with 'P' trap
3
1421
4263
... More
Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws supplied, fitted and fixed complete.
(a) E.W.C.
(ii) Plastic (hallow type) white
P.W.D./S & P/ P-81/It. No-10
3
380
1140
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.
i) Polythene Flush Pipe
3
155
465
... More
Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
(iv) 600 mm long
12
107
1284
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
(ii) 550 mm X 400 mm size
6
2208
13248
... More
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
6
1497
8982
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.
(a) Sink only
(i) 530 mm X 430 mm x 180 mm
2
3285
6570
... More
Supplying, fitting and fixing pillar cock of approved make.
a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
2
555
1110
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I, specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
4
613
2452
... More
Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass
(iii)25 mm dia. and 600 mm long
4
430
1720
... More
Supplying, fitting and fixing soap holder. (b) Fibre glass
4
58
232
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) – Multilayer
(g) 1000 litre capacity
1
5128
5128
... More
Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity
-
-
-
... More
(a) Upto 1st story from G.L.
1
96
96
... More
b) Extra for each additional story
1
72
72
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
5
19
95
... More
A. AMBULANT DISABLED TOILET
Supplying, fitting & Fixing EWC (Size- 710x370x810 mm)in white glazed vitreous chinaware of approved make supplying, fitting and fixing in position complete with necessary nut and bolts. (Model Code No. S10221114-P Trap (CRUSE SET) of CERA or equivalent.)
1
5446
5446
... More
B. Fittings of Ambulant Disabled Toilet
-
-
-
... More
a) Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.)
White
1
2406
2406
... More
b) Soft Close seat cover of approved make with lid and C.P. hinges, rubber buffer and brass screws suppling, fitting and fixing complete. E W C (Model Code No. B1520118 of CERA or equivalent.)
1
1299
1299
... More
c) Supplying, fitting and fixing Stainless steel Wall Mounted Grab Bar. Load bearing capacity 150 kg, covered by Nylon surface with contour finish (for better grip) with Anti-bacterial surface complete. (Model Code No. B2210106 of CERA or equivalent.)
1
1825
1825
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved makesupplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety. (JSW/JSPL/SHYAM /SRMB/ELECTROSTEEL/SSL(Tor Steel/ HYSD))
3
6797
20391.15
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole
cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary,ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.(ii) For 20 users
A) With Pakur variety. (JSW/JSPL/SHYAM /SRMB/ELECTROSTEEL/SSL(Tor Steel/ HYSD)
1
45700
45700.28
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(JSW/JSPL/SHYAM /SRMB/ELECTROSTEEL/SSL(Tor Steel/ HYSD)
1
15958
15958.79
... More
Cutting hole through wall,roof or cornice and mending good all damages.
20
68
1360
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Meter Length
-
-
-
... More
(a) 75 mm
20
196
3920
... More
(b) 110 mm
20
292
5840
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(B) Fittings
-
-
-
... More
(i) Coupler (a) 75 mm
6
46
276
... More
(i) Coupler (b) 110 mm
8
85
680
... More
(ii) Plain Tee (a) 75 mm
8
46
368
... More
(ii) Plain Tee (b) 110 mm
5
85
425
... More
(iii) Door Tee (b) 110 mm
9
195
1755
... More
vi) Door Y (LH) & (RH) (b) 110 mm
6
276
1656
... More
x) Bend 87.5º
(a) 75 mm
4
61
244
... More
x) Bend 87.5º (b) 110 mm
4
120
480
... More
xi) Door Bend (T.S.) 110 mm
4
147
588
... More
xiv) Cross Tee with Door
(a) 75 mm
2
216
432
... More
xiv) Cross Tee with Door (b) 110 mm
2
239
478
... More
xv) Vent Cowl 110 mm
2
33
66
... More
xvi) Pipe Clip
(a) 75 mm
6
16
96
... More
xvi) Pipe Clip (b) 110 mm
11
21
231
... More
xviii) W.C. Connector (450 mm long) W / lipring
(a) 75 mm
4
277
1108
... More
xxiii) 110/110 S Trap (a) 75 mm
4
434
1736
... More
xxvi) Reducer 110 X 75 mm (a) 75 mm
4
80
320
... More
xxvii) Reducing Tee (110 X 75 mm) (a) 75 mm
4
142
568
... More
xIix) Door Gasket b)110 mm
7
8
56
... More
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials.
(A) Above ground
-
-
-
... More
(a) 75 mm
20
45
900
... More
(b) 110 mm
20
57
1140
... More
Supplying,fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides).
(iv) 100 mm
24
294
7056
... More
Supplying, fitting and fixing C.I. round grating.
150 mm dia
4
85
340
... More
Supplying, fitting and fixing shower of approved brand and make.
(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
4
1251
5004
... More
Supplying, fitting and fixing pillar cock of approved make.
f) (i) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand
2
1058
2116
... More
Supplying, fitting and fixing pillar cock of approved make. f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
4
1269
5076
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
3
1015
3045
... More
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 63 Amp make L&T
1
4255
4255.96
... More
Supplying and fixing Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc 63 Amp 415V FP Make Havels
1
4902
4902.8
... More
Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991) Dimension of Al. Bars [85mm long] - 4 x 25 x 5 mm Dimension of Sheet Metal Box - 500x150mm 415 V, 100/125 A
1
2556
2556.46
... More
Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 15/16 Amp 240 V DP with fuse on L& N Make Havells
1
593
593.28
... More
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make Legrand 6 way Enclosure (607716) along with a) FP S&F 415 V, 63 Amp MCB Isolator necessary connection. b) SP MCB 240V, 6-32 Amp-----18 Nos.
1
8002
8002.07
... More
a) Supplying and fixing double-door (2+6) way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Enclosure Enclosure (DHDPSNODRW06) (Havels make )
4
1105
4420.76
... More
Supplying and fixing 240/415 V MCB of Breaking
capacity 10kA & C characteristics on din rail of
existing DBs and necessary connection
SP MCB 6-32 A (Legrand make)
24
195
4696.8
... More
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 40A DP ISOLATOR (Havels make)
4
214
856.96
... More
Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brandapproved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required
-
-
-
... More
(a)2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC
20
153
3069.4
... More
(b)2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
[For power plug & pump motor connection]
125
122
15321.25
... More
(C)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
[For out door fitting]
30
105
3151.8
... More
Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing
terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing
incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where
necy. incl. painting.
(a) 200X150X100 MM
2
512
1025.88
... More
Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/)
10 sq mm 2 core
50
104
5201.5
... More
Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/)
16 sq mm 4 core
15
212
3182.7
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :4 Core 35 sq.mm.
3
166
500.58
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :2 Core 10 sq.mm.
8
118
947.6
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :4 Core 16 sq.mm.
6
135
815.76
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 10 sq.mm.
8
35
280.16
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3.5 Core 35 sq.mm.
3
162
488.22
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 Core 16 sq.mm.
6
97
587.1
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
1
199
199.82
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages
(v) No. 12 SWG
150
4
618
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe
2
1569
3139.44
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top
cover plate flushed in wall incl. mending good damages to original finish.
2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
i)Average run 6 mtr
60
919
55187.4
... More
Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop.
60
26
1606.8
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type
plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl.
mending good damages to original finish
2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
-
-
-
... More
a) On Board
5
256
1282.35
... More
b) Average run 4.5 mtr.
7
966
6762.98
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
a)Blank Plate for modular box-----1no
Rate = (456+20 = 476)
[8 for power plug 1 for pump]
9
490
4412.52
... More
Supplying & Delivery at site LED batten Tube light fitting (Philips make, model - BN021C LED20S PSU CW GR S2
30
635
19068.39
... More
Fixing only Single/twin fluorescent light fitting complete with all accessories directly on wall/Celling by screws etc.
30
88
2657.4
... More
Supply & delivery at site 15 watt LED Bulb (Philips /Havells make model-New Adore 15W E27 CDL Ball Lamp ), as per direction of EIC.
8
224
1794.67
... More
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.
8
39
313.12
... More
Fixing only 15 W LED lamp
8
5
41.2
... More
Supply and delivery of Ceilling fan 48” Sweep
a) Crompton Greaves make
10
2351
23514.9
... More
Fixing only Ceiling Fan Complete with Blades . Regulator ,Canopy ,Fort Rubber Bush etc. Incl. S & F. 1/1.40 PBC Standered wire & making necessary connection as refquired by 2x1.5 sqmm flexible copper wire
10
67
679.8
... More
Supply & Fixing 60 Wt. Electronics Step-Socket type fan regulator (Anchor Make) on switch board after cutting Bakelite tip cover as per direction of EIC
10
224
2245.4
... More
Supply and delivery of 230V,50Hz Heavy duty Metal (9")exhuast fan.
6
1918
11513.34
... More
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)
23 cm Al Exhaust fan (9")
6
156
939.36
... More
Supply and delivery of 230V,50Hz Heavy duty Metal (12")exhuast fan.
1
2155
2155.79
... More
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)
30 cm Al Exhaust fan (12")
1
198
198.79
... More
Fixing Exhaust Fan after making Hole in wall & making good damages & smooth cement finish etc. as praticable as possibe & prividing necessary length of insulated wire & making connection for Exhaust of dia.
-
-
-
... More
a) 23 cm.(9")
6
254
1526.46
... More
b) 30 cm.(12")
1
338
338.87
... More
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (for future provision of AC machines)
1
807
807.52
... More
Supplying and delivery at site 220-240V 36 Watt LED Outdoor type luminiares (Make:- Philips
Model No- BRP046 LED 36W MR SI PSU)
4
4532
18128
... More
Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required
4
220
881.68
... More
Supply and Fixing of 2 mm Polyvinyl glow sign board madeof 22 SWG GI sheet box with 5”X12” aluminum channel for fixing the vinyl board after necessary cutting the letter as
required & s\f LED tube light fittings along with all accessories.
[8 x 4 ]+[4 x 2]= 40
40
509
20394
... More
Supply, and fixing of 1HP self priming pump : Make KSB,peribloc-1
1
6568
6568.31
... More
Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.
1
178
178.19
... More
Add G.S.T @18%
3414964.14
-
614693.55
... More
Add L.W.Cess @1%
4029657.69
-
40296.58
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%