Municipal Affairs Department Tender

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. Ref. Page -14, Item -1, PWD SOR Vol-I w. e. f. 1.11.2017

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth Ref. Page -15, Item -8, PWD SOR Vol-I w. e. f. 1.11.2017

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mmnominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint asper item 8 (a) of subhead C of Section (C). Ref. Page -47, Item -1, PWD SOR Vol-I w. e. f. 1.11.2017

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. Ref.Page -16, Item -16, PWD SOR Vol-I w. e. f. 1.11.2017

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (a) 1:3:6 proportion Ref. Page -23, Item -1, PWD SOR Vol-I w. e. f. 1.11.2017

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety Ref. Page -24, Item -4, PWD SOR Vol-I w. e. f. 1.11.2017

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge Ref. Page -42, Item -36 a), PWD SOR Vol-I w. e. f. 1.11.2017

(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel II. JSW/JSPL / SHYAM/SRMB / BMASL / ELECROSTEEL/SSL Bsaed on Analysis Rate Ref. Page -43-44, Item -40 II), PWD SOR Vol-I w. e. f. 1.11.2017

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). Ref. Page -189, Item -1, PWD SOR Vol-I w. e. f. 1.11.2017

Ceilling plaster, (ii) With 1:4 cement mortar, (c) 10 mm. thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. Ref. Page -192, Item -15, PWD SOR Vol-I w. e. f. 1.11.2017

Supplying, Fitting & Fixing 30 mm thick Factory made moulded Door shutter, consisting of solid core single leaf flash door of 30 mm thickness lipped with 15 mm [5mmx3] thick x 30 mm wide on one style and top rail and 10 mm [5mmx2] thick x 30 mm wide of the other style and bottom rail. The inner panel laminated with 2 mm thick termite proof water proof and fire resistant moulded PVC sheet with raised panel designed in different plain/ or Prelam colour on one side after routing the moulded design on flash door and 2mm plain and or Prelam PVC sheet on other side using rubber adhesive on flash door and solvent cement adhesive on the PVC lipping etc. complete excluding hardwares as necessary as per direction of Engineer-in Charge, Manufacturer‟s Specification and drawing.. In ground floor. (a) Moulded door using 2 mm moulded PVC sheet or 2 mm etched moulded PVC sheet on one side & 2 mm PVC sheet on other side. Ref. Page -133, Item -25,a), PWD SOR Vol-I w. e. f. 1.11.2017

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor: (a) One Coat Ref. Page -196, Item -8,a), PWD SOR Vol-I w. e. f. 1.11.2017

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion Ref. Page -197 Item -17), PWD SOR Vol-I w. e. f. 1.11.2017

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size Ref. Page -41, Item -2,ii)PWD SOR Vol-II With effect from 01.11.2017 (Sanitary & Plumbing)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality Ref. Page -201 Item -4,i), PWD SOR Vol-I w. e. f. 1.11.2017

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by ynthetic adhesive & grout materials etc. A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative Ref. Page -64 Item -35, PWD SOR Vol-I w. e. f. 1.11.2017

Wall

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground floor Flash butt welded windows and ventilators (No shop priming will be allowed to facilitate inspection of workmanship) Without integrated grills. Ref. Page -107, Item -20 a) PWD SOR Vol-I w. e. f. 1.11.2017

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame on any colour, frame size 550 mm X 400 mm Ref: page- 82, item -19, PWD SOR Vol-II w.e.f. 01.11.2017 Ref Item- E2

Standard Plastick (12l) Dustbin, as per market price Ref: page- 82, item -19, PWD SOR Vol-II w.e.f. 01.11.2017 Ref Item- E2

Supplying P.V.C. water storage tank of approved quality with closed top with lid (black) - Multilayer (a) 500 litre Capacity Ref: page- 37, item -6, PWD SOR Vol-II w.e.f. 01.11.2017 Ref Item- E5

Supplying, fitting and fixing pillar cock of approved make a) (i) CP pillar cock -15 mm (Equivalent to code no. -507 & model - Tropical / Sumthing special of ESSCO or similar brand) Ref: page- 45, item -19,a), PWD SOR Vol-II w.e.f. 01.11.2017

Supplying, fitting and fixing liquid soap container a) Cromium Plated Ref: page- 82, item -17,a), PWD SOR Vol-I w.e.f. 01.11.2017 Ref Item- E4

(d) (i) Chromium plated angular stop cock with wall flange (Equivalent to code no. -5053 & model - Florentine of jaquar or similar brand) Ref: page- 6, item -7, PWD SOR Vol-Ii w.e.f. 01.11.2017

(ii) Chromium plated angular Bib cock with wall flange (Equivalent to code no. -5047 & model - Florentine of jaquar or similar brand) Ref: page- 6, item -7, PWD SOR Vol-Ii w.e.f. 01.11.2017

(ii) Chromium plated Bib cock long body with wall flance with aerator (Equivalent to code no. -512 & model - Tropical / Sumthing special of ESSCO or similar brand) Ref: page- 6, item -7,a), PWD SOR Vol-I w.e.f. 01.11.2017 Ref Item- E5

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Expose Work (ii) 25 mm dia. medium quality Ref. Page -2, Item -1,a ,PWD SOR Vol-I 01.11.2017 Ref Item - E5

(ii) 32 mm dia medium quality

Supplying, fitting and fixing Gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only) Ref: page- 5, item -5,vi), PWD SOR Vol-II w.e.f. 01.11.2017 Ref Item- E5

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut 15 mm dia (iii) 600 mm long Ref: page- 43, item -9,iii), PWD SOR Vol-II w.e.f. 01.11.2017 Ref Item- E5

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (ii) 530 mm X 410 mm Ref. Page -79, Item -4, PWD SOR Vol-II w. e. f. 1.11.2017 (Sanitary & Plumbing)

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm Ref. Page -80, Item -6, PWD SOR Vol-II With effect from 01.11.2017 (Sanitary & Plumbing)

Supplying, fitting and fixing squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. ( payment of concrete will be paid separately). (i) 450 mm x 350 mm Ref. Page -80, Item -7,PWD SOR Vol-II w. e. f. 01.11.2017

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. Ref. Page -36, Item -2,PWD SOR Vol-II w. e. f. 01.11.2017 (Sanitary & Plumbing)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick ( weighing 7.4 kg/sq.m.) Ref.Page -205, Item -1 i),PWD SOR Vol-I w. e. f. 1.11.2017

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. Ref. Page -43, Item -10,iv) PWD SOR Vol-II With effect from 01.11.2017 (Sanitary & Plumbing)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety. Nadia excluding area of Kalyani Sub Division REMARKS rate ( in Rs.) Malda Darjeeling except plains of Siliguri Sub Division Jalpaiguri , Alipurduar, Plains of Siliguri Sub Divn. & area of Haldibari PS Coochbehar excluding the area of Haldibari PS Uttar / Dakshin Dinajpur Dist. Item no. Description of Item unit Kolkata / 24 Pgs (N & S), / Area of Kalyani Sub Divn. Purba Bardhaman Paschim Bardhaman, Purulia, Birbhum Howrah / Hooghly Purba Medinipur / Jhargram Bakura Paschim Medinipur / Jhargram Murshidabad SECTION (B) -Sanitary & Drainage Works (B)-(IV) INSPECTION PIT, SEPTIC TANK, SOAK PIT ETC Ref. Page -87, Item -1,PWD SOR Vol-II With effect from 01.11.2017 (Sanitary & Plumbing)

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete. A) UPVC PIPES ii) 110 mm dia Ref. Page -363, Item -21, PWD Scheduled (B)

Plain Tee

Bend 87.5 degree

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth Ref.Page -15, Item -8 a), PWD SOR Vol-I w. e. f. 1.11.2017

Supplying and laying Polythene Sheet (150gm / Sq.M) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. Ref. Page -47, Item -3, PWD SOR Vol-I w. e. f. 1.11.2017

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (a) 1:3:6 proportion Ref. Page -23, Item -1a), PWD SOR Vol-I w. e. f. 1.11.2017

A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (Payment to be made on measurement of finished quantity) Ref. Page 2, Item -4, PWD SOR Vol-I w. e. f. 1.11.2017

Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] (ii) 30 mm. thick Ref. Page -74 Item -46, PWD SOR Vol-I w. e. f. 1.11.2017

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three ) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-incharge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) Ref.Page -109, Item -22,PWD SOR Vol-I w. e. f. 1.11.2017

Five visible Sign Board with fitting & fixing complete as per market price Ref. Item- E-8

Cleaning materials brush, phynile, Napthalin, etc (for 6 month) as per market price Ref. Item- E9

Register for Roster Maintained for regular cleaning and maintenance and a caretaker in on duty at all times during open hours. As per market price Ref. Item- D1

Sign Board for Name and Contact details of the following are displayed prominently Hand writing with painting. As per market price Ref. Item- D3

SMS / another ICT based feedback system (with number displayed on which SMS has to be sent) as per market price Ref. Item- D4

Odonil Toilet Ari Freshner-50 gm ( for 6 month) as per market price Ref. Item- D5

Plants / shurbs in the vicinity of toilet complex Are well maintained / Plant / Pots as per market price Ref. Item-A3

Hand dryer/paper napkin ( for 6 month) as per market price Ref. Item-A5

Ladies Toilets have vending Manual Mechanism as per market price Ref. Item-A6

Add 18 % GST

Add 1 % Cess