Municipal Affairs Department Tender

Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (ii) On Granular Surfaces treated with primer (Using Bitumen emulsion at the rate of 0.25 to 0.30 Kg per sqm.)

Providing and laying bitunious macadam with Mobile Hot Mix Plant (Light Duty) using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature by means of appreved and suitable arrangements to the required grade, lable and alignment and rolled with suitable power for break down, inter - mediate and finished rolling as per specification to achieve the disired compaction including cost and carriage of stone material and bitumen, hire charges of machinary and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Specifications for Road & Bridge Works of MoRT & H (5th Revision) For Grading II cum 1538.00 1579.00 (19mm nominal size, 50 - 75 mm thick)

Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical 2050*7.2

Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) On Bituminous Surface (Using Bitumen Emulsion at the rate of 0.20 to 0.30 Kg per sqm.)

Providing and laying Premixed Seal Coat (Type B) with approved quality sand / grit @ 0.6m3 / 100m2 and bitumen binder on throughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand / grit (100% passing through 2.36mm sieve and retained on 180 micron sieve) unifermly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage and binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including the hire charges of machinaries, tools & plants requred for construction and quality controle complete as per Clause 511 of Specifications for Road and Bridge Works of MoRT & H (5th Revision). II By Mechanical Means with Hot Bitumen Binder (@ 6.08 Kg. / 10 Sqm.)

Add @18% G.S.T. Rs.

Labour welfare cess @1% Rs.