Municipal Affairs Department Tender

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. - a) 2 core 6 sq.mm. cables (Schedule of PWD page F-5 & Item no. - 8.b-iv)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Gloster/KEI/Havells) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required : - a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (For Loop Box to fittings)

Supply & delivery of 9 mtr. Long 80mm dia steel tubuler pole as per with250mmx250mmx6mm base plate (make- calcutta pole/jk/shubham) sp40-27

S & F 1.5 Mtrs. Long 40mm dia G.I pole top arm bracket with sleeves, nuts etc as required with painting by one cote red led and one cote of synthetic enamel paint . a) single arm

Erection of Single Steel tubular pole of length as given below with/ without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. a) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts. (Schedule of PWD page H-1 & Item no. - 1.a)

Extra on items 8 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole. (Schedule of PWD page H-1 & Item no. - 3.a.i)

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9mtr long pole. (Schedule of PWD page H-2 & Item no. - 7.A. - b)(i) One coat of red lead/Zinc chromate priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9mtr long pole. (Schedule of PWD page H-2 & Item no. - 7.A. - b)(ii) 1st coat of synthetic enamel paint over the primer

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9mtr long pole. (Schedule of PWD page H-2 & Item no. - 7.A. - b)(iii) 2nd coat of synthetic enamel paint over the 1st coat

Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below - (Schedule of PWD page H-2 & Item no. - 6.a) (a) Size 40 mm and upto 50 mm (B.M. - 01 to 100)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: - By ISI-Medium GI pipe. (PWD schedule G - 01/2.a)

Excavation of soil for installation of Earth Electrode and filling & ramming - a) For Soft Soil . (Schedule of PWD page G-1 & Item no. - 1.a)

S & D of 100W LED street light luminaire 120lm / W with IP66 and necessery inter-connection as per direction of E.I.C. (Make SURYA lexon(SLEUL 100W IP66LXN/HPL LED SL10060E/BENLO ULTIMA BL18SL100W ULT WITH 5 YEARS WARRENTY)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (Schedule of PWD page C-3 & Item no. - 20..a)

Supply & installation outdoortype Feeder piller box in top 5 mm. & other sides 3 mm thick (size-length -4'x breadth-30”x depth-18”) fabricated with CRC sheet and (40x40x6)mm. M.S angle (40x6) mm.MS flat also provided the side vents roof & both side double door with a rail way type locking arrangement and also used a bus-bar arrangement and providing the following main switches ,bus-bar & accessories incl. earthing attachment & painting as per direction of E.I.C. INCOMMER :-A) S&F of 415V 63A TP mainswitch on S.S. body 3nos 32A Re-wirable fuses on existing frame - 01 no (Make Havells). (B) 01 nos LED pilot lamp with 3 nos backup fuse (L&T) (C) S&F of E.I. Denger Plate - 01 no .OUTGOING :-S& installation of Timer watch with 1 no 415V MNX-22 Contractor, 3 nos 32A SP MCB (C series), 1 no LED Indicator & 1 no Toggle switch incl. all accessories embedded in 6 way SPN MCB BDB box with necy inter connection as per E.I.C. (L&T) - 01 no.

Supply & fixing 230V 6W of Stream strip outdoor flexible strip, Blue in colour with IP6 protection & system efficiency 100lm/w with power adepter & PF 0.95 & SPD 4 KV etc. including necessary inter connection as per direction of E.I.C. (Magik, cat no. - RUSR006B & Adapter - GUPA000U1840/ Suriya/Crompton/Bajaj)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required : - a) 40 mm dia (Schedule of PWD page F-5 & Item no. - 11.c)

Sub Total

18%gst

1% cess