Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provision Of An Additional Gate For 49 Nos Residential Quarters At Newtown Kolkata Provision Of Gate Along With Associated Fittings For Entrance And Exit To Comcg Deck Area And Rcc Drain At Cgre Manicktala Under Ge (i) (cgn) Kolkata in Kolkata, West Bengal, with an estimated contract value of Rs. 28,00,000. The bid opening date for this tender is 04-11-2026 and the last date for bid submission is 23-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - WB Tender

Opening Date4 Nov 2026
Closing Soon23 Nov 2026
Tender Amount₹ 28,00,000 
Notes
Download

Costs

Description

Provision Of An Additional Gate For 49 Nos Residential Quarters At Newtown Kolkata Provision Of Gate Along With Associated Fittings For Entrance And Exit To Comcg Deck Area And Rcc Drain At Cgre Manicktala Under Ge (i) (cgn) Kolkata

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specified and as directed.

7.8

100

-

... More
M & L for plain cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) for foundations complete all as specified and as directed.

2.4

148

-

... More
M&L for Mild steel TMT bars, 10 mm dia and over cut to length bent to shape required , including cranking , bending, spirally for hooping for columns , hooking ends and binding with mild steel wire (annealed) not less 0.9mm dia of securing with clips complete all as specified and as directed.

6828

101

-

... More
M&L for Mild steel TMT bars, of 5 mm dia and over upto and including 10mm dia, cut to length bent to shape required , including cranking , bending, spirally for hooping for in stirrups, spacers and binders complete all as specified and as directed.

300

102

-

... More
Use & waste of formwork to sides of foundations,pile cap, footing,grid beam,plinth beam etc of Rough finished square, rectangular or polygonal surface complete all as specified and as directed.

20.6

102

-

... More
Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

56

103

-

... More
M & L for Reinforced Cement Concrete (Design Mix) of M30 grade concrete in foundation including raft, foundation beams, plinth beam, bases for columns etc footing basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

6

104

-

... More
M & L for design Mix RCC M30 grade concrete with 20mm down graded aggregate in columns, pillars, piers, posts and struts etc. complete all as specified and directed.

7.5

121

-

... More
M&L for brick work sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

2

121

-

... More
M & L for 20 mm thick plastering in cement mortar (1:4) on external fair faces or Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement with WPC complete all as specified and directed.

301

100

-

... More
M&L for Granite (of any type) work of 20mm thick (table rubbed and polished) in steps, jambs, pillars, win- dow-cills, cooking plat- forms and like over screed bed 20 mm thick in cement mortar (1:4) including point- ing in white cement (1:2) us- ing marble dust with admix- ture of pigment to match with shade of granite complete all as specified and as directed

40

148

-

... More
S&F MS Framed work Fe-290 Gde-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all specified and as directed.

920

101

-

... More
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

70

102

-

... More
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar(1:3), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified as directed.

5

102

-

... More
M&L for Cement concrete 100 mm thick Type C2 (1:3:6) 20 mm graded stone aggregate as in floor finish concrete surface even and rough finish to receive topping layer complete all as specified and as directed.

135

102

-

... More
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

6.75

103

-

... More
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed.

135

104

-

... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels ete. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

50

105

-

... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

630

106

-

... More
M&L for Plain Cement Concrete (1:2:4) Type B1 (using 20 mm graded granite stone aggregate) as in coping including necessary form work and complete all as specified and as directed.

12.5

107

-

... More
Material and labour for precast cement concrete slab for manhole covers RCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate complete all as specified and as directed.

16.5

108

-

... More
M & L for preparing new surfaces and applying three coats of white wash on walls complete all as specified all as specified and as directed

375

109

-

... More
M & L for concealed type point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC conduit medium duty (ISI marked) not less than 20 mm dia with accessories such as bends, cross, elbow, tees etc. of suitable size including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multi-stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly for Light/Ceiling fan/Exhaust fan/call bell point complete all as specified and as directed.

10

110

-

... More
S & F 6 Amps one way single pole switch modular type complete all as specified and as directed.

10

111

-

... More
M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, for tube light, conforming to IS complete all as specified and as directed.

10

112

-

... More
S & F modular metal box 6 module complete all as specified and as directed.

2

113

-

... More
S & F modular white cover plate with frame 6 way complete all as specified and as directed.

2

115

-

... More
S & F of Flood light 120W with minimum system efficiency 100 lum/W including electronic driver and all fixing arrangement complete all as specified and as directed. Note: Warranty Certificate for 5 yrs to be submitted to the department.

4

116

-

... More
Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with minimum system efficiency 100 lum/W with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. including all necessary fixing equipments all as specified and as directed . Note: Warranty Certificate for 5 yrs to be submitted to the department.

4

121

-

... More
M & L for sub main wiring with two single core PVC insulated unsheathed , 1100 Volts grade, (FR-LS) copper cable 2 X 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 1 X 4 sqmm copper conductor and connected to common earth dolly complete as directed . Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) Quoted rate is incluive of chase cutting, laying of conduit and making good the surface with proper plaster all as directed.

120

121

-

... More
S & F sheet metal DB 4 way double door with 200 Amps rated bus bar Single pole with neutral complete all as specified and as directed.

1

100

-

... More
Supply and fix MCB SP 240V, 5-32 Amps capacity complete all as specified and directed.

2

148

-

... More
Supply and fix MCB SPN 240V, 6-32 Amps capacity complete all as specified and directed.

1

101

-

... More
Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

2

102

-

... More
Supply and laying 50 mm dia steel water tube light grade galvanised with all fittings laid in trenches for cable suporting complete all as specified and as directed.

12

102

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.