Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Addition/alteration And Special Repair To Certain Otm Accn At Sevoke Road Military Station Under Ge Sevoke Road in Kalimpong, West Bengal, with an estimated contract value of Rs. 3,61,00,000. The bid opening date for this tender is 29-09-2026 and the last date for bid submission is 02-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - WB Tender

Opening Date29 Sep 2026
Closing Date2 Dec 2026
Tender Amount₹ 3,61,00,000 
Notes
Download

Costs

Description

Addition/alteration And Special Repair To Certain Otm Accn At Sevoke Road Military Station Under Ge Sevoke Road

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Material & labour for Brickwork with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6), complete all as specified and as directed

-

-

-

... More
Material & labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth, complete all as specified and as directed.

-

-

-

... More
Material & labour for RCC (design mix) of grade M-25 (using 20 mm graded aggregate) beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

-

-

-

... More
Material & labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for Rough finished surface of concrete, complete all as specified and as directed.

-

-

-

... More
Material & labour for Mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending, etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

-

-

-

... More
All as item No. 8 above but of 5mm dia and over upto and including 10mm dia as in stirrups, rings spacers and binder, complete all as specified and as directed.

-

-

-

... More
Material & labour for Mild steel Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and as directed.

-

-

-

... More
Material & labour for Mild steel Rolled sections as in column, vertical posts, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to Fe- 410-W (Gde E-250) quality -A complete all as specified and as directed

-

-

-

... More
Material & labour for cement concrete 1:2:4 type B-2 (using 40mm graded aggregate) as in foundation (post hole), filling & mass concrete, complete all as specified and as directed.

-

-

-

... More
Material and labour for Steel work in tubular trusses, tubular rafters, stanchions and purlins trusses, tubular pipe sections as in main and cross beams, hip and jack rafters, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes with necessary welding, bolting, special shaped washer, clamps, cleats conforming to I.S.-1161-1979 grade St.-240, complete all as specified and as directed.

-

-

-

... More
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

-

-

-

... More
Material & Labour for preparation of new steel surfaces of any description n.exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

-

-

-

... More
Supplying & Fixing of pre-painted galvalume aluminium zinc coating GI based semi-corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and as directed.

-

-

-

... More
Supplying & Fixing of pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed

-

-

-

... More
Material & Labour for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid if fixed in ceiling, flat or sloping including anodised aluminium snap grid framework for false ceiling, hangers of 6 mm dia. G.I. (upto1200mm length), adjusting level and fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia., 40mm long, complete all as specified and as directed.

-

-

-

... More
Material & Labour for rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement), complete as all specified and as directed

-

-

-

... More
Material & Labour for Preparation of new-plastered surfaces of walls including pilasters and cornices etc, and applying two coat of distemper oil emulsion over a coat of primer as per manufacturers instruction, complete as all specified and as directed.

-

-

-

... More
M&L for rendering 20mm thick cement plaster in cement mortar (1:4) in two layers of 10mm thick, each layer mixed with water proofing compound as per manufacturer’s instructions on top layers, finished even and smooth without using extra cement, complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately as “supply only”).

-

-

-

... More
Supplying only of Integral Water proofing compound, as all specified and as directed.

-

-

-

... More
Material & Labour for applying two or more coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm /litre and UV resistance as per IS 154B9:200, alkali and fungal resistant, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including primer coat of exterior primer applied @ 0.90 litre/10 sqm incl damp coat over new surfaces, complete all as specified and as directed.

-

-

-

... More
Material & Labour for 7mm thick glazed coloured ceramic tiles in vertical surfaces of size 350 x 250 mm / 450 x 350mm, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of the tile, over and including 10mm thick rendering in CM (1:3) on fair faces of brickwork, complete all as specified and as directed.

-

-

-

... More
Material & Labour for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm as in floor etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of the tile, over and including 20mm thick cement mortar screed bed in CM (1:6), complete all as specified and as directed.

-

-

-

... More
Material & Labour for non skid coloured ceramic tiles 7-8mm thick (square or rectangular) ,area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile over and including 20mm thick cement mortar screed bed in CM 1:6,complete all as specified and as directed

-

-

-

... More
Material & Labour for non skid coloured ceramic tiles 7-8mm thick (square or rectangular) ,area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile, over and including 10mm thick rendering in CM (1:3) as in backing coat for skirting, complete all as specified and as directed.

-

-

-

... More
Material & Labour for non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular), polished, area of each tile exceeding 0.18 Sqm but not exceeding.38 sqm as in floor etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of the tile, over and including 20mm thick cement mortar screed bed in CM (1:6), complete complete all as specified and as directed.

-

-

-

... More
Material & Labour for non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) polished, area of each tile exceeding 0.18 Sqm but not exceeding.38 sqm as in skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of the tile, over and including 10mm thick cement mortar screed bed in CM (1:3) etc, complete complete all as specified and as directed.

-

-

-

... More
Material & Labour for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile, over & including 20mm thick cement mortar screed bed in CM (1:6), complete all as specified and as directed.

-

-

-

... More
Material & Labour for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile, over & including 10mm thick cement mortar screed bed in CM (1:3), complete all as specified and as directed

-

-

-

... More
Material & Labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid over & including 15mm thick cement mortar screed bed in CM (1:3), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and as directed

-

-

-

... More
Material & Labour for Machine cut kota stone slab flooring 20-25mm thick, laid over & including 20mm thick cement mortar screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed

-

-

-

... More
Material & labour for 20mm thick granite slabs/Tiles (of any type) laid in floors/treads over and including 20mm thick cement mortar screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite, complete all as specified and as directed.

-

-

-

... More
Material & labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of grade M-35 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

-

-

-

... More
Material & labour for 25 mm thick Chequered cement concrete tiles of size 20cm x 20cm/ 30cm x 30cm laid in floors over & including 20mm thick cement mortar screed bed in CM (1:6) set, jointed and pointed in neat cement slurry, complete all as specified and as directed.

-

-

-

... More
Material & labour for 75 mm thick PCC type C-2, 1:3:6 (40mm graded aggregate ) as in sub base, complete all as specified and as directed.

-

-

-

... More
Material & labour for 100mm thick cement concrete type B-1,1:2:4 (using 20mm graded aggregate.) as in PCC floor, complete all as specified and as directed.

-

-

-

... More
Material & labour for 75 mm thick PCC type C-2,1:3:6 (using 40mm graded aggregate) finished even and smooth without using extra cement as in plinth protection, paths , steps etc complete all as specified and as directed.

-

-

-

... More
Material & labour for PCC type B1,1:2:4 (using 20mm graded aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

-

-

-

... More
Supplying and fixing in position in the opening, solid PVC door frame of size 50mm X 47mm made out of 5mm thick plain-coloured PVC sheet, reinforced with M.S Square tube, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in the frame at site as per specification & drawing, Factory made solid panel PVC door shutter, 30 mm thick (style), consisting of frame made out of M.S. tubes for top & bottom rails. The M.S. frame shall be covered with heat-moulded plain-colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of powder coated standard aluminium section in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing, complete all as specified and as directed Note :- Weight of Aluminium sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / wire cloth only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate. complete all as specified and as directed

-

-

-

... More
Supplying and fixing of pressed steel frame of size 165 X 60 mm for doors with one or more redates including necessary fixing lugs, hinges, lock strike, plate etc, complete all as specified and as directed.

-

-

-

... More
Material & labour for PCC type C1,1:3:6 (20mm grade agg) as in back filling of pressed steel frame, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, of 30mm thickness, complete all as specified and as directed..

-

-

-

... More
Supplying and fixing at site, wood grain printed PVC sheet of 1mm thickness, fixed or laid on to flush doors by using rubber based adhesive, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of 35mm thick glazed/skeleton shutters of second class hard wood fitted to chowkats, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc. The size of members of shutters shall be as specified in SSR part-I section 8 and clause 8.24(a) ,complete all as specified and as directed..

-

-

-

... More
Supplying and fixing of Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.4mm, fixed with stainless steel wire staple fixed with aluminium/wood beading etc, complete all as specified and as directed

-

-

-

... More
Material & Labour for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink prime, complete all as specified and as directed.

-

-

-

... More
Supplying and fixings in repair for Harrison rails of anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all as specified and as directed..

-

-

-

... More
Supplying and fixing of sheet glass, 4 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of figured glass,4 mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed

-

-

-

... More
Supplying and fixing of sheet glass, 4.8 mm thick, ordinary quality with oil putty in squares n exc 0.50 Sqm in each pane fixed in aluminium door/partition wall, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of stainless steel butt hinges, medium weight, 100mm long, complete all as specified and as directed .

-

-

-

... More
Supplying and fixing of aluminium anodised bow handles of extruded section, 150mm size, fabricated type, fixed with screws to shutters, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of aluminium anodised bow handles of extruded section, 125 mm size, fabricated type, fixed with screws to shutters, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of aluminium anodised barrel tower bolts of extruded section, 100mm long, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of aluminium alloy, anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of Floor door stopper of brass body and tongue, with hard drawn steel spring, overall length of cover plate 150mm long, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing in repair for aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of 4 lever Mortice lock, vertical type, size 100mm as in brass complete all as specified and as directed.

-

-

-

... More
Supplying and fixing in repair for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

-

-

-

... More
Supplying and fixing in repair stainless steel solid body Pegset of peg 6, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) pipes of 75mm bore single socketed, in any lengths with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) pipes of 75mm bore single socketed, in any lengths with rubber ring joints, fixed to walls complete all as specified and as directed, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) pipes of 110mm bore single socketed, in any lengths with rubber ring joints, laid in trenches or in floors complete all as specified and as directed., complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) pipes of 110mm bore single socketed, in any lengths with rubber ring joints, fixed to walls complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) bends any radius in pipe of bore 75 mm, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) bends any radius provided with access door in pipe of bore 75 mm, complete all as specified and as directed

-

-

-

... More
Supplying and fixing of PVC (SWR) bends any radius in pipe of bore 110 mm, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) junction single(Single T) equal or unequal provided with access door in pipe of bore 110mm etc, complete all as specified and directed.

-

-

-

... More
Supplying and fixing of PVC (SWR) vent cowl etc in pipe of bore 110 mm, complete all as specified and directed.

-

-

-

... More
Material & Labour for 75 mm diameter outlet PVC (SWR) floor trap, plain with grating, including jointing with solvent cement & jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc., including taking down existing U/S trap, complete all as specified and directed.

-

-

-

... More
Material & Labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement after taking down existing U/s gully trap, complete all as specified and directed.

-

-

-

... More
Material & Labour for DWCPE pipe (SN -8) of nominal diameter 200mm,laid in trenches and joined, complete all as specified and directed.

-

-

-

... More
Supplying & Fixing of rotational moulded polyethylene water storage triple layer white tanks of 500 ltrs capacity (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed.

-

-

-

... More
Supplying & Fixing of rotational moulded polyethylene water storage triple layer white tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed

-

-

-

... More
Supplying & Fixing in repair 20 mm dia ball valve ,high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum wt 20 mm-210 gms),complete all as specified and as directed.

-

-

-

... More
Supplying & Fixing of steel water tubing of bore 15 mm, medium grade, galvanized, with all fittings and fixtures, fixed complete to walls, ceilings or laid on floors etc, complete all as specified and as directed.

-

-

-

... More
Supplying & Fixing of steel water tubing of bore 20 mm, medium grade, galvanized, with all fittings and fixtures, fixed complete to walls, ceilings or laid on floors etc, complete all as specified and as directed.

-

-

-

... More
Supplying & laying of 16mm outer dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including brass elbow, tee, male brass threaded adaptor (MTA/ MBTA ), female brass threaded adaptor (FTA/FBTA), brass union etc, complete all as specified and as directed.

-

-

-

... More
Supplying & laying of 20 mm outer dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including brass elbow, tee, male brass threaded adaptor (MTA/ MBTA ), female brass threaded adaptor (FTA/FBTA), brass union etc, complete all as specified and as directed.

-

-

-

... More
Supplying & laying of 25 mm outer dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including brass elbow, tee, male brass threaded adaptor (MTA/ MBTA ), female brass threaded adaptor (FTA/FBTA), brass union etc, complete all as specified and as directed.

-

-

-

... More
Supplying & Fixing in repair, stop valves, in pipe of bore dia. 15mm, fancy type, premium quality, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed with ends for iron pipe or for unions and fixed, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, bib taps, in pipe of bore dia. 15mm, fancy type, premium quality, cast copper alloy with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

-

-

-

... More
Supply & fixing in repair, pillar tap, in pipe of bore dia.15mm, fancy type, premium quality, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, gate valves, in pipe of bore dia. 20mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, gate valves, in pipe of bore dia. 25 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, vitreous China wash basin, white, flat back of size 550 x 400mm including 40x40x5mm angle iron brackets with paint including cutting for and pinning in ends of brackets; Chromium Plated pillar tap, fancy type, cast copper alloy with capstan heads, screwed down high pressure, screwed shanks and fly nuts, screwed for iron pipe 15mm dia and fixed, PVC connection 15mm size with PTMT nuts of length 450mm high pressure , brass PTMT waste coupling (half or full threaded) 32 mm dia with long screwed shanks and fly nuts, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, Vitreous China bowl urinal flat back, size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including 40mm size brass chromium plated waste coupling with long screwed shanks and fly nuts flanged end bedded in red lead, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe), complete all as specified and as directed

-

-

-

... More
Supplying & fixing in repair, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, vitreous China squatting pan "orissa" pattern of size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe), P or S trap, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, Health faucet (ABS Body) mild steel chromium plated, suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in pipe etc, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, Urinal spreader of PTMT, any colour, for fixing with 15 mm dia. pipe (Minimum weight 60gms), complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, 15mm size PVC connection with PTMT nuts 600mm long, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing in repair, brass chromium plated, shower rose, 125mm size, with or without swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of low density polyethylene pipes (LDPE) of bore dia. 32 mm with all fittings as required, of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of low density polyethylene pipes (LDPE) of bore dia. 40 mm with all fittings as required, of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing in repair, 10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & PVC connection 450mm long with PTMT nuts high pressure, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing in repair Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed

-

-

-

... More
Supplying and fixing of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing in repair Tubular towel rail of 20 mm dia., brass chromium plated, D type and 60cm long between flanges, complete all as specified and as directed.

-

-

-

... More
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLSH of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and existing//new PVC rigid conduit (medium grade) as per site with modular metal box and modular white cover plate with frame of suitable size concealed to wall for one light / fan point / call bell complete all as specified and as directed. Note:-(1) new PVC conduit used shall be measured and paid separately. (2) Rate for Modular sunken boxes, inner and outer cover are inclusive.

-

-

-

... More
All as item sl. No. 108.00 above but with 1.5 sq-mm copper conductor with 1.5 Sqmm earth stranded wire for 5Amps power point in independent board.

-

-

-

... More
All as per item sl. No. 108.00 above, but with 1.5 sq-mm copper conductor with 1.5 Sqmm earth stranded wire for 5Amps power point on same board

-

-

-

... More
All as per item sl. No. 108.00 above, but with 2.5 sq-mm copper conductor with 2.5 Sqmm earth stranded wire for 15/16Amps power point in independent board.

-

-

-

... More
Supplying & fixing of modular switch one way 6 Amps 230 volts,1 module complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of modular bell push switch one way 6 Amps 230 volts,1 module, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of modular switch one way 16 Amps 230 volts,1 module, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of modular socket 2 in 1, 2/3 pin ,6 Amp complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of modular socket 3 pin, 6 Amp-16 Amp combined shuttered complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of modular electronic step regulator (speed regulation in 5 steps) 1module suitable for ceiling fan 1200 sweep/1400 mm, 100 Watt complete all as specified and as directed

-

-

-

... More
Supplying & fixing of ceiling rose ,surface bakelite 65mm x 50mm size with three terminals,3 phase/PVC/polycarbonate, isolated body, complete all as specified and as directed.

-

-

-

... More
Supplying & fixing of LED building security light of capacity 35 watt,230 V AC in Aluminium PDC housing, glass cover with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr, complete all as specified and as directed.

-

-

-

... More
Supply, Installation, testing & commissioning of integral LED 4ft luminaire of PVC housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a 18/20 Watt LED with colour consistency SDCM< 5,CRI> 80 and colour temperature - 4000 to 6500K, Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of at-least 120 lumen/watt, power consumption should not be more than 18W (+5%). the life of fixture (including Driver): 50000 burning Hrs.@ L70B50 Lumen maintenance @ design ambient temp 50 deg C. The electronic driver used shall have a power factor >0.95 and THD < 10% suitable for an operating voltage range of 150-270V AC current Ripple<5% internal surge protection should be minimum 2.5KV, electrical insulation class should be Class I &driver should be of class B serviceability complete), complete all as specified and as directed.

-

-

-

... More
Supply, Installation, testing & commissioning of integral LED 4ft luminaire of Aluminium housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a 18/20 Watt LED with colour consistency SDCM< 5,CRI> 80 and colour temperature - 4000 to 6500K, Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of at-least 120 lumen/watt, power consumption should not be more than 18W (+5%). the life of fixture (including Driver): 50000 burning Hrs.@ L70B50 Lumen maintenance @ design ambient temp 50 deg C. The electronic driver used shall have a power factor >0.95 and THD < 10% suitable for an operating voltage range of 150-270V AC current Ripple<5% internal surge protection should be minimum 2.5KV, electrical insulation class should be Class I &driver should be of class B serviceability, complete all as specified and as directed

-

-

-

... More
Supplying and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of AC exhaust fan, single phase, 230/240 V, size 250 mm seeep PVC body with lowers incl making holes on wall & making good the disturbed surfaces with all connecting arrangement, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of Bell Ding-Dong AC 230 V Single Pole ,complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of DB with sheet metal enclosure 240 volts, 8 way with Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good disturbed surface area, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of DB with sheet metal enclosure 240 volts, 4 way with Amp rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good disturbed surface area, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of MCB single pole (SP) 240 volts of capacity 6-32 Amp,C curve complete all as specified and as directed.

-

-

-

... More
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLSH cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLSH cable of size 6 sqmm as in continuous earth wire drawn into and including surface rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed. Note- Rate for Cutting, chiselling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate.

-

-

-

... More
Material and labour for Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed.

-

-

-

... More
Supplying and fixing of PVC conduit not less than 20mm dia, medium grade including of chases and concealed in wall and making good, complete all as specified and as directed

-

-

-

... More
Material & Labour for taking down cement or cement lime plaster from wall including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

-

-

-

... More
Material & Labour for demolition of Reinforced Cement concrete (reinforcement to be cut as required to facilitate demolition), of any description and in any position not otherwise specifically provided for, complete all as specified and directed

-

-

-

... More
Material & Labour for demolition of cement concrete (unreinforced) in ground floor, pavings not exc. 15cm thickness, below or above ground level, complete all as specified and as directed.

-

-

-

... More
Material & Labour for dismantling floor, hearth or wall tiling and stone slabs including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

-

-

-

... More
Material & Labour for dismantling wall & ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets of any thickness, including cover fillets, complete as specified and as directed.

-

-

-

... More
Material & Labour for demolition of brick work built in CM including taking out roots vegetation if any at any position and removal/ disposal of unserviceable materials to a distance as directed by the Engineer-in-charge, complete all as specified and as directed

-

-

-

... More
Material & Labour for demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing, complete all as specified and as directed.

-

-

-

... More
Material & Labour for taking down chowkhats or frame exc 1.5sqm but not exc 4sqm with shutters (without taking off shutter from the frame), complete all as specified and as directed.

-

-

-

... More
Material & Labour for taking down chowkhats or frame n exc 1.5 sqm but with shutters (without taking off shutters from the frame), complete all as specified and as directed.

-

-

-

... More
Material & Labour for taking down shutters of any description of area exc 1 Sqm & n.exc 2 Sqm, complete all as specified and as directed.

-

-

-

... More
Material & Labour for dismantling Mild Steel or Wrought iron work including all connected fixtures and fittings of any description and sizes, complete all as specified and as directed.

-

-

-

... More
Material & Labour for dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete of any section, including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

-

-

-

... More
Material & labour for dismantling timber scantlings in unframed work of 40 sq. cm and over in section, in any position, complete all as specified and as directed.

-

-

-

... More
Material & labour for dismantling Plain or (corrugated , semi corrugated , etc ) sheets of any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

-

-

-

... More
Material & labour for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed

-

-

-

... More
Material & labour for demolition and breaking up drain pipes of internal diameter 150mm (Salt glazed ware, AC or Reinforced concrete), set in cement mortar and removing from work site at a distance n.exc meter, complete all as specified and as directed.

-

-

-

... More
Material & labour for dismantling water tank and removing to store of capacity exc 250 ltrs & n.exc 500 ltrs, complete all as specified and as directed.

-

-

-

... More
Material & labour for dismantling of water tanks and removing to store of capacity exc 500Ltr but n exc 1000Ltr capacity complete all as specified and as directed.

-

-

-

... More
Material & labour for taking down 15mm bore GI steel water tubing from wall/ceiling /floor including all fittings, segregating and stacking the pipes and fittings properly at site for checking complete all as specified and as directed.

-

-

-

... More
Material & labour for taking down 20 mm bore GI steel water tubing from wall/ceiling /floor including all fittings, segregating and stacking the pipes and fittings properly at site for checking complete all as specified and as directed.

-

-

-

... More
Material & labour for taking down 25 mm bore GI steel water tubing from wall/ceiling /floor including all fittings, segregating and stacking the pipes and fittings properly at site for checking complete all as specified and as directed.

-

-

-

... More
Material & labour for taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches, ceiling roses, pendants, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc, complete all as specified and as directed.

-

-

-

... More
Material & labour for taking down and refixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan, complete all as specified and as directed.

-

-

-

... More
Material & labour for taking down and refixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed.

-

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.