Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repairs, Rewiring, And Maint Of Internal Electrification , Rewinding Of Fan And Other Allied Services In Md Accn Of Bmc Under Ge (c) Kolkata in Kolkata, West Bengal, with an estimated contract value of Rs. 34,00,000. The bid opening date for this tender is 30-10-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - WB Tender
Opening Date30 Oct 2026
Closing Soon21 Nov 2026
Tender Amount₹ 34,00,000
Costs
EMD
₹ 68,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Repairs, Rewiring, And Maint Of Internal Electrification , Rewinding Of Fan And Other Allied Services In Md Accn Of Bmc Under Ge (c) Kolkata
Contact
Tender Id
2026_MES_796491_1Tender No
8989/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All as per item No. 2.00 here in before but for one 5 Amp switch socket combination on independent board
30
-
-
... More
All as per item No. 2.00 here in before but for 15 Amp socket outlet by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLSH multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLSH continues as earth wire connected to earth dolly etc complete all as specified and directed
30
-
-
... More
All as per item No. 2.00 here-in-before but using 4 sq mm size stranded copper conductor cable for one AC Starter including 4 sq mm PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed.
30
-
-
... More
M&L for point wiring for one light/fan/bell point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade (Confirming to IS-694, 1990) including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn through and including rigid PVC conduit including sunken type GI box made up of 1.6mm thick sheet covered with 3 mm thick laminated sheet top cover for housing switches, sockets, fan regulators etc complete, all as specified & directed.
30
-
-
... More
All as per item No. 7.00 here in before but for one 5 Amp socket outlet on the same board with other switches.
4
-
-
... More
All as per item No. 7.00 here in before but for one 5 Amp switch socket combination on independent board
20
-
-
... More
All as per item No. 7.00 here in before but for One Light point controlled by two, two way switches.
1
-
-
... More
All as per item No. 7.00 here in before but for 15 Amp socket outlet by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLSH multi stranded on independent board .
12
-
-
... More
All as per item No. 7.00 here-in-before but using 4 sq mm size stranded copper conductor cable for one AC starter.
12
-
-
... More
Supply & Fix switch piano, flush type, single pole, one way, 5/6 Amp, 240 Volts all as specified & directed
82
-
-
... More
Supply & Fix switch piano, flush type, single pole, two way, 5/6 Amp, 240 Volts all as specified & directed
1
-
-
... More
S&F bell push flush type 5 Amps.single pole, one way, 5/6 Amp, 240 Volts all as specified & directed
28
-
-
... More
S&F for switch socket combination 3 pin 5 Amps 240 volts flush type all as specified & directed
50
-
-
... More
S&F socket out let 3 pin 5 Amps flush type 240 volts flush type all as specified & directed
12
-
-
... More
S&F switch socket combination multipurpose 3 pin 15 Amps and one pin 5 Amps controlled by one switch.
42
-
-
... More
M&L for lamp holder insulated body with back plate for batten fittings complete all as directed
10
-
-
... More
S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body
42
-
-
... More
S&F call bell, ding dong AC 230 volt single pole (ding dong type).
28
-
-
... More
S&F electronic step type fan regulator for type 230 volt.
20
-
-
... More
S&F in replacement GI rectangular sunken box of size 100mm X 100mm X 50 mm with 3mm thick plastic laminated sheet cover for mounting switches, sockets, fan regulator etc deep sunk in wall including making good disturbed surfaces complete all as specified and directed.
Note: The cost of cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishing the surface to match with existing surface is deemed to be including in quoted rate.
3
-
-
... More
S&F in replacement GI rectangular sunken box of size 200mm X 250mm X 50 mm with 3mm with 3mm thick plastic laminated sheet cover for mounting, switches, sockets, fan regulator etc deep sunk in wall including making good disturbed surfaces complete all as specified and directed.
Note: The cost of cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surfaceis deemed to be included in quoted rate.
4
-
-
... More
M&L for point wiring for one light/ bell/ fan controlled by one number one way switch with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including rigid PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) with accessories like Tee, bend etc with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular GI sunken box of suitable size concealed on wall with modular cover plate and frame of suitable module for housing modular type switches / socket/ Fan regulator etc. complete including making good to the disturbed surfaces of wall/ceiling/floor in same specification as per existing complete all as specified and directed.
24
-
-
... More
All as per item No. 25.00 here in before but for 3 pin 5 amps socket out let point on same board with other switches.
8
-
-
... More
All as per item No. 25.00 here in before but for one 5 amp switchon independent board.
20
-
-
... More
All as per item No. 25.00 here in before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board.
20
-
-
... More
S&F switch piano modular two way 5/6 Amps 240V AC 1M complete all as specified
48
-
-
... More
S&F modular bell push type 5 Amps 240V AC 1M complete all as specified
4
-
-
... More
S&F modular socket out let 3 pin 5 Amps 240V AC 2M complete all as specified
28
-
-
... More
S & F modular Socket outlet 3 pin, 16 Amps 240V AC 2M complete all as specified
15
-
-
... More
S & F Modular switch 1 way 16A, 240V AC 1M complete all as specified
15
-
-
... More
Supply and fix in repair LED light 9W downlighter in cool day/ neutral white / warm white surface/recess mounted made up of Polycarbonate body complete with all the connection including taking down old unsv one and making good to disturbed surface of the wall complete all as specified and directed. Make Crompton CDR-222-06-57-SL-NWH or equivalent
65
-
-
... More
S&F in repair mini recess / surface mounted LED panel 300x300mm luminaire in cool day/neutral white/ warm white in powder coated housing complete incl connection & taking down old UNSV complete all as specified and as directed
2
-
-
... More
S&F in repairs energy efficient LED bed side light lamp 3 Watt in three colour option including dismantling complete all as specified. Model No. 48042/30/30 of Make Philips or equivalent in CG/Havells.
2
-
-
... More
Supply and fixing LED lights fitting 1x 10W, 220V,AC wall mounted LED batten with PVC housing & integrated electronic driver with min efficacy of 100lumen/W connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
110
-
-
... More
Supply and fixing LED lights fitting 1x 20W, 220V,AC wall mounted LED batten with PVC housing & integrated electronic driver with min efficacy of 100lumen/W connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
255
-
-
... More
S & F LED bulb 9/7 Watts 240V 50Hz warm white b22/E27 base in bulb holder complete all as directed.
8
-
-
... More
Supply and fixing in repair, LED light fitting 1x9W/1X10W bulkhead luminaires IP66 rated including LED light driver holder, Aluminium housing connecting up with three core flexible copper conductor cable of suitable size.
14
-
-
... More
Supply and fixing in repair, LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed/surface type cool day white/ neutral white / warm with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
2
-
-
... More
Supply and fixing in repair, Decorative wall light fixture made up of glass with PVC base having champgne gold finish base including 9 W LED Lamp B22 base complete with all the connection and making good to disturbed surface of the wall complete all as specified and directed.
95
-
-
... More
Dis-assembling carefully ceiling fans (any make) of 1200/1400mm sweep, cutting & removing old copper winding wire and rewinding the same with new super enameled copper wire of suitable size / gauge and providing insulation by varnishing,the winding, oiling and greasing, replacing bearing and gun metal shaft if required and reassembling back including testing complete.
Note :- (i) Cost of bearings provided shall be measured in this item and nothing will be paid extra on this account.
(ii) Working space if required, will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises
(iii) If winded fan found unserviceable within six month of rewinding,contractor will repair the same without any extra cost.
(iv)Cost of Machining work in body of ceiling fan by taking out worn out bearing, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account.
(v) Cost of carrying ceiling fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard
490
-
-
... More
Dis-assembling of exhaust fan/wall fan of size above 300mm & upto 450 mm AC 230 Volts, 50 Hz 900/1400 RPM for repair, removing existing burnt winding wire, bearing/bushes, flexible wire, shaft, check nuts, frame and rewinding with super enameled copper windings wire of suitable size and replacement of bushes, bearings, shafts, check nuts, bolts and washers, greasing, varnishing and reassembling back including testing complete. Note :- (i) Cost of bushes/bearings, provided shall be measured and paid in this item and nothing extra shall be paid on this account. (ii) Working space if required,will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises.
(iii) If winded exhaust fan found unserviceable within six month of rewinding,contractor will repair the same without any extra cost.
(iv)Cost of Machining work in body of exhaust fan by taking out worn out bush, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account. (v) Cost of carrying exhaust fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard.
20
-
-
... More
Dis-assembling of exhaust fan/wall fan of size upto 300 mm AC 230 Volts, 50 Hz 900/1400 RPM for repair, removing existing burnt winding wire, bearing/bushes, flexible wire, shaft, check nuts, frame and rewinding with super enameled copper windings wire of suitable size and weight not less than 450gms and replacement of bushes, bearings, shafts, check nuts, bolts and washers, greasing, varnishing and reassembling back including testing complete. Note :- (i) Cost of bushes/bearings, provided shall be measured and paid in this item and nothing extra shall be paid on this account. (ii) Working space if required,will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises.
(iii) If winded exhaust fan found unserviceable within six month of rewinding,contractor will repair the same without any extra cost.
(iv)Cost of Machining work in body of exhaust fan by taking out worn out bush, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account. (v) Cost of carrying exhaust fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard.
160
-
-
... More
Supply and fix exhaust fan made of steel complete blade fan motor with louvers , voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including making good to disturbed wall surface as per existing finish complete all as specified and directed including taking down old unsv one complete all as specified and directed.
6
-
-
... More
Supply and fix exhaust fan made of steel complete blade fan motor with louvers , voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450mm including making good to disturbed wall surface as per existing finish complete all as specified and directed including taking down old unsv one complete all as specified and directed.
4
-
-
... More
Supply and fix capacitor 2.5 mfd to 3.15 mfd dry type for Ceiling fan complete all as specified and directed.
825
-
-
... More
Supply and fix capacitor 4 mfd to 6 mfd dry type for exhaust fan complete all as specified and directed.
260
-
-
... More
Preparation of old painted surfaces of the body, blades, down rod etc of ceiling fans of size 1200/1400mm sweep (any make) complete by rubbing with amery paper and filing in cavities with approved filler and applying one coat of spray painting with synthetic enamel paint (Glossy white/ pale cream) on the body, blades, down rods and writing MES /Fan no with black synthetic enamel paint complete all as specified & directed.
490
-
-
... More
Preparation of old painted surfaces of the body and blades, of exhaust fans of size upto 450 mm sweep (any make) complete by rubbing with amery paper and filing in cavities with approved filler and applying one coat of spray painting with synthetic enamel paint (Glossy white/ pale cream) on the body, blades, down rods and writing MES /Exhaust no with black synthetic enamel paint complete all as specified & directed.
180
-
-
... More
Supply & fix PVC capacitor clamp for ceiling fan/ exhaust fan complete all as specified and directed.
315
-
-
... More
Supply & Fix shaft with spring for ceiling fan of 1200/1400mm sweep and fixing in position for smooth functioning of ceiling fan complete all as specified and directed.
305
-
-
... More
Supply and fix ceiling fan hook clamp with rubber bush, nut bolts, split pin , washer complete set suitable for existing ceiling fan 1200mm/1400mm sweep complete all as specified and directed.
215
-
-
... More
Supply and fix in replacement Ceiling fan stator 1200mm sweep with copper winding including ,thick steel bolt with double nuts and locking pins and high quality rubber bushing to reduce vibration complete all as specified and directed.
225
-
-
... More
Supply and fix in replacement ceiling fan rotor complete suitable for 1200mm sweep fan as per existing size complete all as specified and directed.
225
-
-
... More
Supply & Fix ceiling fan mild steel body set (upper & lower) with two set of bearings for ceiling fans of sweep 1200mm duly painted of any make and fixing in position complete all as specified and directed.
228
-
-
... More
Supply and fix PVC canopy set (upper & lower) for ceiling fans with of size 1200mm to 1400 mm and fixing in position complete.
310
-
-
... More
Supply and fix of aluminium blades duly painted as per existing with fan blade screws of ceiling fan for any sweep( 1200mm to 1400 mm) & make complete.
280
-
-
... More
Supply and fix MS heavy duty down rod of 15mm dia and 300mm length with necessary cutting / drilling holes and PVC connector specified and directed.
190
-
-
... More
Supply and fix MS heavy duty down rod of 15mm dia and 600mm length with necessary cutting / drilling holes and PVC connector specified and directed.
30
-
-
... More
Supply and fix in replacement PVC flexible 2 core cable with copper conductor of min size 0.76sqmm mm from ceiling rose to ceiling fan complete all as specified and directed.
200
-
-
... More
Taking down unserviceable ceiling fans and supplying and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with all the connection as directed.
13
-
-
... More
Taking down unserviceable wall fans and supply and fixing wall fans 400mm sweep power input 60Watts min speed 1350RPM min air delivery 85 CMM 240V 50Hz complete with electrical connection complete all as specified and directed including taking down old unsv one complete all as specified and directed.
8
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed including taking down old unsv one complete all as specified and directed.
12
-
-
... More
Dissembling the BLDC Ceiling fan and taking out the BLDC Ceiling fan PCB Assembly (controller bd) and repair to same and refixing the same in original position and reassmbling the ceiling fan after cleaning the dust complete all as specified and directed
60
-
-
... More
Supply & Fix in repairs BLDC fan PCBA (controller Bd) as per existing make and size including removing older one complete all as specified and directed.
35
-
-
... More
Supply & Fix in repairs BLDC Ceiling Fan Stator Ferrite Magnet Ring 12/14/16 Poles as per existing make and size including removing older one complete all as specified and directed.
25
-
-
... More
Supply & Fix in repairs BLDC rotor magnetic coil of 12/14/16 poles as per existing make and size including removing older one complete all as specified and directed.
20
-
-
... More
Supply & Fix in repairs plastic 12 pole stamping ring as per existing make and size including removing older one complete all as specified and directed.
18
-
-
... More
Supply only remotes for BLDC ceiling fan.Make Crompton Model No. Energion HS
10
-
-
... More
Supply and fix in replacement of louvers iron with shutters suitable for existing exhaust fan of 300mm sweep to 450mm sweep upto bldg of G+4 storey complete all as specified and directed .
Note 1. Cost of fixing of louvers upto G+4 storey is deemed to be included in the quoted rate.
2. For G+5 upto G+12, necessary scafolding cost will be paid seperately.
130
-
-
... More
M & L for double layer self supporting steel scafolding to external perimeter of building duly cross braced and properly aligned for the functional aspect and safety of both workers and the building with bldg G+5 to G+12 complete all as specified and directed (note: safety of worker & safety item to be provided by contractor)
3
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including including making good to disturbed wall surface as per existing finish complete all as specified and directed including taking down old unsv one complete all as specified and directed.
10
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm including including making good to disturbed wall surface as per existing finish complete all as specified and directed including taking down old unsv one complete all as specified and directed.
10
-
-
... More
Supply and fix PVC exhaust fan motor copper wound for sweep size 200mm to 300mm including taking down of old unsv ones complete all as specified and directed.
50
-
-
... More
S&F 5 star rated water heater (geyser) storage type plastic body with MS inner tank with glass line coating and heating element upto 2KW, capacity 25 ltrs energy effieceint, BEE 5 star rated with complete with steel threaded geyser connection pipe length not less than 60cm including washers for incoming & outgoing hot & cold water connections as specified and directed including connecting upwater heater/geyser including required hold fast 10 cm long with washers and accessories complete all as specified and as directed including taking down of old unsv ones .
3
-
-
... More
Taking down carefully unserviceable geyser of any type and make from site after disconnecting of water & electrical connection & carrying out to MES store yard for inspection and thereafter to workshop for repair & replacement of components such as heating elements ,thermostat ,cable, neon lamp, plugtop,outer casing ,plates & repair work to apparatus plate ,storage tank ,split plate ,including de-scaling of water tank etc and carrying back to MES store yard for for testing and fixing at site and making water and electrical connection on competion and all as specified and directed NOTE:spare parts will be measured and paid seperately.
30
-
-
... More
M&L for painting of geysers 25 ltrs at site/at workshop dully with one coat of synthetic enamelled paint (white) including preparation of surfaces with brush, cleaning agents as required of 25 Ltr capacity and its front with best quality paint all as directed and specified.
10
-
-
... More
M&L for brazing/gas welding of inner container copper of 25 ltrs /50 ltrs capacity and any make and making leak proof all as directed.
15
-
-
... More
S & F for steel threaded geyser connection pipe not less than 60cm in length complete all as specified and directed.
140
-
-
... More
S & F in repair Heating element 1.5KW/2kw including rubber gasket ISI marked as per existing including taking down of old unsv one complete all as specified and directed.
35
-
-
... More
S & F in repair Thermostate for suitable existing geyser of 25/50 litrs capacity as per existing including taking down of old unsv one complete all as specified and directed.
20
-
-
... More
S & F in repair Apparatus plate assembly complete for geyser of capacity 25/50 litrs capacity as per existing including taking down of old unsv one complete all as specified and directed.
10
-
-
... More
S & F in repair Outer casing made of MS sheet suitable for geyser of capacity 25 litrs as per existing including taking down of old unsv one complete all as specified and directed.
5
-
-
... More
S & F in repair Storage tank fabricated from MS sheet gauge suitable for geyser of capacity 25 ltrs as per existing including taking down of old unsv one complete all as specified and directed.
5
-
-
... More
S & F in repair Split plate bottom cover made out of MS sheet suitable for 25 litrs capacity geyser as per existing including taking down of old unsv one complete all as specified and directed.
4
-
-
... More
j) '-do- but top cover
2
-
-
... More
S & F in repair insulating material glass wool as per existing including taking down of old unsv one complete all as specified and directed.
5
-
-
... More
S & F in repair Element holding brass stud as per existing including taking down of old unsv one complete all as specified and directed.
8
-
-
... More
S & F in clamp as per existing including taking down of old unsv one complete all as specified and directed.
20
-
-
... More
S & F in repair Fusible metal plug as per existing including taking down of old unsv one complete all as specified and directed.
10
-
-
... More
S & F in repair Neon lamp round/square with connection leadas per existing including taking down of old unsv one complete all as specified and directed.
20
-
-
... More
S & F in repair Non return valve for geyser inlet as per existing including taking down of old unsv one complete all as specified and directed.
20
-
-
... More
S & F in repair Anchor fastener bolt suitable for geyser as per existing including taking down of old unsv one and making good to disturbed surface as per existing finish complete all as specified and directed.
29
-
-
... More
Cutting the existing required on brick wall in square/round type suitable for fixing Exhaust fan including cement work grouting 4 Nos long bolts nuts washers and making good to disturbed surface with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all is directed.
2
-
-

