Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Periodical Services In Various Buildings, Repair/maint Of Sunken, Sanitary Fittings, Plumbing Works, Cleaning Of Water Tanks And Allied Works In Omq Area And Repair/maint Including Restring Of Overhead Lines And Replacement Of Damaged Insulators in Alipurduar, West Bengal, with an estimated contract value of Rs. 42,00,000. The bid opening date for this tender is 22-05-2025 and the last date for bid submission is 05-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Civil And Construction
Electrical and Electronics
Water Storage And Supply
Electrical Works
Eprocure
Opening Date22 May 2025
Closing Date5 Jun 2025
Tender Amount₹ 42,00,000
Costs
EMD
₹ 84,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_705564_2Tender No
C/8869/2025-26/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://https://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M & L for complete removal of existing treatment of old decorated surfaces of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying two coats of distemper oil emulsion, complete all as specified and directed.
2800
-
-
... More
M & L for preparing old decorated surfaces of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying one coat of cement base paint, complete all as specified and directed.
3500
-
-
... More
M & L for complete removal of existing treatment of old decorated surfaces of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying two coat of cement base paint, complete all as specified and directed.
700
-
-
... More
M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.
400
-
-
... More
M & L for complete removal of existing treatment of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), complete all as specified and directed.
200
-
-
... More
M & L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.
403
-
-
... More
M & L for complete removal of existing treatment of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.
250
-
-
... More
Taking down cement plaster on brick or stone walls etc.including racking out joints,hacking for key scrubing down with water & receive plaster upto double story height, complete all as specified and as directed.
580
-
-
... More
M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and smooth without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)
260
-
-
... More
M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces of wall, finished fair and even, complete all as specified and directed.
170
-
-
... More
M&L 5mm thick rendering in CM (1:3) on fair faces of ceiling surfaces, finished even and smooth (without using extra cement), complete all as specified and directed.
40
-
-
... More
M & L for rendering 15mm thick on brick/concrete surfaces in CM (1:3), mixed with water proofing compound as per manufacturer's instruction and finished the surface even and fair without using extra cement including preparation and cleaning the surfaces using wire brush and washing down with water to remove dust etc. and brushing with neat cement slurry @ 0.5 kg/sqm with acrylic based polymer modified cementitous (pidifine 2K), complete all as specified and directed.
110
-
-
... More
Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed
8
-
-
... More
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.
260
-
-
... More
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.
70
-
-
... More
M&L for complete removal of existing treatment of wall/ceiling applying a coat of 1.5mm thick wall care putty, rubbing with sand paper to obtained smooth & plain surface complete all as specified and as directed.
400
-
-
... More
M&L for preparing newly plastered surfaces/applied putty surfaces of internal walls etc and applying two coats of distemper oil emulsion over a coat of alkali resitant primer, complete all as specified and directed.
500
-
-
... More
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
40
-
-
... More
M & L for preparing old decorated surface of walls and applying one coat of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed.
700
-
-
... More
M & L for complete removal of existing treatment of old decorated surface of walls and applying two coats of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed.
350
-
-
... More
M&L for removal of small trees/vegetation etc including cutting holes into or through brick walls/concrete, uprooting of roots etc and making good distrubed surfaces with cement concrete with PCC (1:2:4) type B-0 (using using 12.5mm graded crushed stone aggregate), mixed with water proofing compound as per manfacturer's instruction, complete all as specified and directed.
95
-
-
... More
Cleaning/Uprooting of vegetation/grass, muds, garbages, waste etc growth on inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet, valley gutter and shaft portion of wall surfaces, back side of toilet portion, complete all as specified and directed.
450
-
-
... More
M&L repair to broken/damaged RCC chajjas/pillar/lintel or similar surfaces by making good with PCC 1:2:4 type B1 or rendering in CM (1:3), 15mm thick mixed with water proofing compound to top, sides and soffits including necessary form work, reinforecement work, if required, including demolition of broken/loose PCC or taking down old plaster, at any position and upto 10mtr height from ground, complete all as specified and directed.
200
-
-
... More
M & L for obliterating old writing of any description, not exceeding 0.1 Sqm, with synthetic enamel paint to match existing work, complete all as specified and directed.
46
-
-
... More
M & L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high with synthetic enamel paint, complete all as specified and directed.
46
-
-
... More
M & L for writing stops, commas, short lines, dashes, hyphens, brackets etc with synthetic enamel paint, complete all as specified and directed.
45
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
265
-
-
... More
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
85
-
-
... More
M&L for glazed ceramic coloured tiles of size 350 x 450 x 7mm/450 x 300 x 7mm thick as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.
180
-
-
... More
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
11.5
-
-
... More
M&L for PCC (1:5:10) type E-2, (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.
5
-
-
... More
M&L for 25mm thick PCC (1:2:4) type B- 0, (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.
10
-
-
... More
M&L for 40mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in floors etc. finished even and smooth with using extra cement, complete all as specified and directed.
55
-
-
... More
M&L for 75mm thick PCC (1:2:4) type B- 2 (using 40mm graded crushed stone aggregate) as in floors, pavings, hardstanding/path etc, complete all as specified and directed.
45
-
-
... More
M&L for 100mm thick PCC (1:2:4) type B- 2 (using 40mm graded crushed stone aggregate) as in floors, pavings, hardstanding/path etc., complete all as specified and directed.
40
-
-
... More
Demolition of reinforced cement concrete (RCC water tank or similar type of RCC structure) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.
(Note:-Reinforcement cut as required to facilitate demolition.)
12
-
-
... More
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100m and disposal unserviceable materials debris and rubbish to a distance n.exc 100m, complete all as specified and directed.
6
-
-
... More
M&L for brick work with sub class 'B' bricks, old size, burnt clay bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:4), complete all as specified and directed.
4.25
-
-
... More
M&L for brick work with sub class 'B' bricks, old size, burnt clay bricks, straight or curved on plan, any radius, built in CM (1:4) in half brick thick, complete all as specified and directed.
15
-
-
... More
Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.
92
-
-
... More
Taking down 15mm bore steel water tubing and connection from wall /ceiling in concealed position including cleaning for removing from site of work, complete all as specified and directed.
130
-
-
... More
S&F steel water tubing and connection medium grade 15mm bore with and including all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed..
70
-
-
... More
S&F steel water tubing and connection, medium grade, 15mm bore with and including all fitting, fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed.
130
-
-
... More
Re-fixing 15mm bore, old steel tubing and connection, in new or old position with new fittings, fixed complete on wall/ceiling, complete all as specified and directed.
(Note : Serviceable steel tube obtained from taking down shall be re-used)
20
-
-
... More
Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.
195
-
-
... More
S&F steel water tubing and connection, medium grade, 20mm bore with and including all fittings fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed.
180
-
-
... More
Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, fixed complete on wall/ceiling, complete all as specified and directed.
(Note : Serviceable steel tube obtained from taking down shall be re-used)
15
-
-
... More
S&F in repair 15mm bore, fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.
26
-
-
... More
S&F in repair 15mm bore angle stop valves, cast copper alloy, high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe, compelete all as specified and directed.
16
-
-
... More
S&F in repair 15mm bore bib taps, long body, cast copper alloy, chromium plated, high pressure, with crutch or butterfly handle, screwed down, screwed both ends for iron pipe or for brass ferrule, compelete all as specified and directed.
27
-
-
... More
S&F in repair 15mm bore for pillar taps with capstan heads, chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed on iron pipe, complete all as specified and directed.
24
-
-
... More
S&F in repair 15mm bore, brass CP pillar tap, swan neck, screwed down, high pressure screwed on iron pipe, complete all as specified and directed.
15
-
-
... More
S&F for 15mm dia pipe, health faucet (ABS Body) mild steel, chromium plated, suitable with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed.
25
-
-
... More
S&F 600mm long brass CP towel rail of fixed with and including CP brass screws and wooden/plastic cleats, complete all as specified and directed
20
-
-
... More
S&F in repair CP toilet paper holder with cover, box type, white, fixed with CP screws, complete all as specified and directed.
20
-
-
... More
S&F in repair shower rose 125mm size, brass, chromium plated, with long head arm for fixing with 15mm bore pipe, complete all as specified and directed.
24
-
-
... More
S&F in repair vitreous china wash hand basin, white, flat back of size 550 x 400mm including PVC waste pipe 32mm bore, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.
15
-
-
... More
S&F in repair 32mm bore PVC solid waste pipe with one end socketed, for wash hand basin and sink 800mm long, complete all as specified and directed.
40
-
-
... More
S&F in repair 40mm bore PVC solid waste pipe with one end socketed, for wash hand basin and sink 800mm long, complete all as specified and directed.
30
-
-
... More
S&F in repairs 600mm x 450mm bevelled edge mirror made of selected quality sheet glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed.
15
-
-
... More
S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement, complete all as specified and directed.
8
-
-
... More
S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.
15
-
-
... More
Fixing only in repairs high or low level flushing cistern and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and directed.
40
-
-
... More
Fixing only in repair wash basins, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed.
20
-
-
... More
S&F PVC connection 15mm size of length 450mm with PTMT nuts, complete all as specified and directed.
28
-
-
... More
S&F in repair CP grating 100mm dia with or without waste hole, fixed to floor trap, complete all as specified and directed.
35
-
-
... More
S & F in repair 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.
30
-
-
... More
S & F in repair acrylic PVC bathroom cabinet of size 550 x 400mm with openable shutter fixed with looking mirror of selected quality sheet glass and with suitable shelves in side the cabinet, superior quality as approved, complete all as specified and directed.
10
-
-
... More
S &F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 25cm side with chromium plate bracket guard, complete all as specified and directed.
20
-
-
... More
S &F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plate bracket guard and railing 60cm long, complete all as specified and directed.
20
-
-
... More
S&F in repair of swan Neck Sink Mixer, chromium plated, regular spout T/M (swing spout), fancy type, complete all as specified and directed.
6
-
-
... More
S&F in repair central hole basin mixer, chromium plated, fancy type, complete all as specified and directed.
6
-
-
... More
S&F in repair 3-in-1 wall mixer, chromium plated, fancy type, complete all as specified and directed.
6
-
-
... More
Repairs to concealed stopcock, angular stop cock, bib tap etc with required brass spindle, as required, and other necessary arrangement / spare parts, complete all as specified and directed. (Note : Spare parts required for repairing shall deemed to be included in the unit quoted rate)
25
-
-
... More
S&F in repair vitreous china squatting pan,"Orissa pattern" white, size 580 x 440mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe etc, complete all as specified and directed.
10
-
-
... More
S&F in repair vitreous china EWC (padestal pattern) white including plastic seat cover of closed pattern with flat bottom with mild steel chromium plated hinging device and flush pipe, complete all as specified and as directed.
6
-
-
... More
S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body, complete all as specified and directed.
5
-
-
... More
S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.
15
-
-
... More
S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.
10
-
-
... More
S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed.
40
-
-
... More
S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.
30
-
-
... More
Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 250 & n. exc. 500 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.
40
-
-
... More
Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 500 & n. exc. 1000 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.
60
-
-
... More
S&F in repair 20mm bore PTMT Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms), complete all as specified and directed.
10
-
-
... More
S & F in repair 110mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed.
50
-
-
... More
S & F in repair 75mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed.
30
-
-
... More
S&F of 110mm bore, PVC (SWR) bends of any radius, with access door, complete all as specified and directed.
5
-
-
... More
S&F of 75mm bore, PVC (SWR) bends of any radius, with access door, complete all as specified and directed.
4
-
-
... More
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, with access door, complete all as specified and directed.
2
-
-
... More
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, with access door, complete all as specified and directed.
2
-
-
... More
M&L for complete removal of existing treatment of old painted surfaces of wall by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"- 9" including cleaning, watering etc to make the surface free frmm dust, loose paint etc, filling cracks up to 5 mm with creak fill paste (elastomeric paste, as per manufacturer of paint) applying 2mm thick wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of weather proof exterior water pased emulsion paint over and including priming coat of exterior primer with fully automatic airless spray machine with flow speed of min 1 ltr mimetic having pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. (Note:- Cost for necessary scafolding, safety & protective measures, insurance & paper marking tape etc shall deemed to be included in the unit quoted rate).
1200
-
-
... More
Restringing and tightening of ACSR conductor of any size and type maintaining stranded sag including providing aluminium binding wire, jumpers on HT/LT over head lines with jumper clip including re-fixing of serviceable cross arms, street light bracket etc, complete all as specified and directed. Note :- (i) Actual number of conductor including earth wire and shortest distance between the poles shall be measured for payment. No extra payment shall be made to the contractor for sag and jumper etc. (ii) Burnt /damaged jumpers of appropriate size shall be replaced by the contractor and cost of the same shall deemed to be included in the unit quoted rate.
1500
-
-
... More
Trimming of tree branches of girth n. exc. 15cm along the alignment of both sides of LT/HT over head electric line which are touching or falling on ACSR conductor/ poles or near by sub stns etc at any at any height from GL and making sufficient clearance (not less than 1.5m) from conductor and taking down the same on the ground carefully, avaoiding damage of tne conductor/pole and removing to a distance n. exc 100m, complete all as specified and directed. Note :(i) Trimming of the branches/twigs shall be done on both sides of the conductor.
(ii) Actual length of cutting along with the alignment of overhead electric line shall be measured for payment
(iii) Trimming of the branches can be carried out twice at same location during the currency of contract, subject to minimum 4 months gap.
1500
-
-
... More
S&F jumper wire, spiral type, insulated, aluminium conductor of cross section 50 Sqmm, suitable for low/high tension jumper wire with colour coding (red, yellow, blue and black), complete all as specified and directed.
30
-
-
... More
S&F in repair porcelain viereous white or brown shackle type insulator including galalvanaized mild steel straps, washers, insulator bolts, washers and nuts 550 volts and above of suitable size of insulator and bolt, complete all as specified and directed.
50
-
-
... More
S&F in repair pin type porcelain vitreous, white or brown insulator including one galvanized mild steel spoindle, two galvanized iron washers and one galvanaized iron nut, 50mm height 65mm dia for 550 volts grade, complete all as specified and directed.
40
-
-
... More
M & L for power cable route marker pre-cast RCC of size 1500mm x 300mm x 50mm with top curved portion, 8mm dia round bar reinforcement, embossing of letter (MES LT POWER CABLE) both faces of pre-cast during casting of RCC pre-cast, applying two coats of external emulsion paint with primer approved colour and painting of embossed surface with black colour including fixing of route marker with proper PCC (1:3:6) as in foundation, complete all specified and as directed.
150
-
-
... More
Taking down serviceable steel tubular pole of 8.5 to 9.0m size from root carefully, transporting to other places, as directed, and re-fixing of pole with street light bracket and street light including excavation/earthwork, disposal of surplus soil, complete all as specified and directed.
(Note : (i) Unit quoted rate shall deemed to be included complete earth work required for taking out and re-fixing of pole.
(ii) PCC work and painting of pole shall be measured and paid seperately under respective items.)
5
-
-
... More
M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated and inclusive of one primer coat and one coat of aluminium paint, complete all as specified and directed.
0.5
-
-
... More
S&F in replacement 4mm dia galvanised steel wire for guard/earth wire on LT OH line, re-stringing, binding and clamping etc, complete all as specified and directed.
0.6
-
-
... More
S&F in replacement cradles, hexagonal/rectangular, fabricated with galvanised steel wire 4mm dia, complete all as specified and directed.
1
-
-
... More
M&L for ACSR conductor of any size in replacement all as directed on LT OH line including stringing tightening clamping and binding with insulators, complete all as specified and directed.
0.5
-
-
... More
S&F in repair danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT/HT, 20 x 25cm size, complete all as specified and directed.
100
-
-
... More
S&F in repair danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20 x 15cm size, complete all as specified and directed.
200
-
-
... More
M&L for stay assembly complete with accessories as shown in electrical plate No. 1 of MES Schedule Part-I, diameter of stay rod 20mm including 7/4mm galvanized stay strand and dismantling of old unserviceable stay assembly of any description and size including all accessories, complete all as specified and directed.
Note : Earthwork cement concrete, mild steel stay clamps with bolts, nuts, loop type insulator, etc, shall be measured separately)
4
-
-
... More
M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation of poles, filing and mass concrete etc. including formwork (as required), complete all as specified and directed.
1
-
-
... More
M&L for PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete including necessary formwork (as required), complete all as specified and directed.
2
-
-
... More
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping of poles, etc. including necessary formwork (as required), complete all as specified and directed.
6
-
-
... More
M&L steel tubular swaged welded pole, type 410 SP-31 (9.00 metres long) including cast iron base plate, finial taper plug, cap, mild steel bolts, nuts, screws, etc. including applying two coat of black bituminous paint internally and externally up to planting depth and applying with two coats of aluminium painting over a coat of red oxide primer on external exposed surfaces including writing MES LT pole and blue reflector strip with synthetic enamel paint (1st grade quality) including dismantling unserviceable steel tubular pole of any description, complete all as specified and directed. Note : Earth work and PCC work shall be measured and paid separately.
2
-
-
... More
M&L steel tubular swaged welded pole, type 410 SP-31 (11.00 metres long) including cast iron base plate, finial taper plug, cap, mild steel bolts, nuts, screws, etc. including applying two coat of black bituminous paint internally and externally up to planting depth and applying with two coats of aluminium painting over a coat of red oxide primer on external exposed surfaces including writing MES LT pole and blue reflector strip with synthetic enamel paint (1st grade quality) includin dismantling unserviceable steel tubular pole of any description, complete all as specified and directed. Note : Earth work and PCC work shall be measured and paid separately.
2
-
-
... More
S&F GI tubing 50mm bore (light grade) with all fittings for protection of cables, laid in trenches, including making good to the disturbed surface including taking down/up old unserviceable pipe of any description, complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately)
24
-
-
... More
S&F GI tubing 40mm bore (light grade) with all fittings for protection of cables, laid in trenches, including making good to the disturbed surface including taking down/up old unserviceable pipe of any description, complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately)
30
-
-
... More
Note: An amount of Rs.40,803.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements