Kolkata Port Trust Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Kolkata Port Trust - KOPT Tender
Civil Works Others
Eprocure
Opening Date6 Feb 2019
Closing Date27 Feb 2019
Tender Amount₹ 4,22,38,116
Costs
EMD
₹ 8,44,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KoPT_440564_1Bid Award Id
ViewTender No
KOPT/KDS/CIV /T/2321/72Tender Authority
Kolkata Port Trust ViewPurchaser Address
-Website
http://http://www.kolkataporttrust.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
With earth obtained from excavation of foundation.
770
-
-
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
60
-
-
BRICKWORKS :Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
900
-
-
Labour for laying single brick flat soling including ramming and dressing bed to proper level and filling joints with powdered earth.
900
-
-
Brick work with 1st class bricks in cement mortar (1:4). In superstructure, ground floor
200
-
-
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
100
-
-
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor. Pakur Variety
1:3:6 proportion
100
-
-
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.Pakur Variety
1
-
-
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade Pakur Variety
300
-
-
Add extra over the rate of ground floor for basement and each additional floor above ground floor for items 1, 4 to 22 of sub Upto 4 th floor.
70
-
-
Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately
4
-
-
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
Above 30 mm & upto 37 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
3120
-
-
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing
and direction.
For works in foundation, basement and upto roof of ground floor/upto 4 m
Tor steel/Mild Steel
SAIL/TATA/RINL
39
-
-
FLOORING :
A. ORIGINAL WORKS :
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C).
100
-
-
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
1256
-
-
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
545
-
-
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.
90
-
-
Supplying, fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor:
Area of each Granite slab 0.6 to 1.0 Square meter.
Add extra for each addl, floor over the rate for item A(33, 34)
27
-
-
upto 4 th floor
3
-
-
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)
ln Ground FIoor:(size not Iess than 800mmX 800 mm X 10.2 mm thick)
140
-
-
Add extra for each addl, floor over the rate for Ground Floor (I) upto 4 the floor
3
-
-
WATERPROOF TREATMENT:
Supplying and laying standard four course bituminous water proofing treatment as per specification laid down in I.S. 1346 - 1991 to be finished with pea size gravel including necessary preparatory works such as shaping mouth of outlets, cutting as and where necessary and refilling with sand and Cement mortar (4:1) or Cement Concrete (1:2:4) with graded stone chips before undertaking the treatment including cutting grooves in parapet and inserting edge of felt and mending good damage complete in all respect as per direction of Engineer - in - Charge including cost of all materials and labours and incidental charges but excluding the cost of Cement Mortar or concrete required for levelling and grading. (In sloped roof Course sand of approved varieties is to be used in place of Pea size gravels as fourth and final course.) i) 1st and 3rd Course with bonding materials of hot applied industrial blown type bitumen of grade 85/25 or 90/15 conforming to I.S.702 - 1988 @ 12Kg/10Sqm on each layer. ii) 2nd course with Hessian base self finished bitumen type3 Gr.-I conforming to I.S. 1322-1993 (weighing 23kg/10Sqm gross with bitumen content 12.10kg/10Sqm ) tested under the provision of I.S. 13826 - 1993 part VII iii) 4th course with washed and clean pea sized gravel or grit @ 0.006 cum/Sqm.
Over Flat Roof
60
-
-
Over Slopped Roof
845
-
-
ORIGINAL WORKS:
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.
For built up sections / structural members of specified sections weighing not less than 22.5 Kg./m upto 8 m
70
-
-
Add for height beyond 8 m upto 12 m
20
-
-
Add for height beyond 12 m upto 16 m
15
-
-
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.
For other structural works like galleries etc.
5
-
-
G. WOOD & PVC WORKS:
A. DOOR WINDOW FRAME: Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
Sal : Siliguri.
0.16
-
-
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
35 mm thick shutters (single leaf)
12
-
-
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
40mm X 6mm, 250mm Length
36
-
-
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
100mm. X 75mm. X 3.50mm.
18
-
-
Iron socket bolt of approved quality fitted and fixed complete
150mm long x 10mm dia bolt.
6
-
-
a) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
300mm long.
6
-
-
Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
With round base:
150 mm grip x 12 mm dia rod.
14
-
-
Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring,heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge.
8
-
-
F. FALSE CEILING:
M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor
140
-
-
H. ADDITIONAL RATE: Add extra over rate of ground floor for each addl. Storey F(1 to 6), B(11,12), F(10,11,12), G(7), G(13, 14,15,16,17,18), C(8,9,10,12), B(14 to 18), B(24 to 27), G(19,20), F(17, 18)
Upto 4th floor
140
-
-
I. PLASTERING, POINTING ETC.
A. ORIGINAL WORKS: Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
With 1:6 cement mortar
20 mm thick plaster
900
-
-
With 1:4 cement mortar
15 mm thick plaster
900
-
-
With 1:3 cement mortar 10 mm thick plaster
850
-
-
Rule pointing to brick work in cement mortar (1:4) with admixture of pigment to match with colour of brick including raking out joints.
700
-
-
B. MISCELLANEOUS ITEM:
Labour for Chipping of concrete surface before taking up Plastering work
850
-
-
J. WHITE WASH, COLOUR WASH& DISTEMPER :
A. ORIGINAL WORKS:
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
(b) Two Coats
Water based interior grade Acrylic Primer
1750
-
-
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
Two Coats
900
-
-
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
Premium 100% Acrylic Emulsion Two Coats
900
-
-
K. PAINTING, VERNISHING ETC.
ORIGINAL WORKS:
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
24
-
-
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
2200
-
-
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
On timber or plastered surface :
With super gloss (hi-gloss) –
Two coats (with any shade except white)
24
-
-
On steel or other metal surface :
With other than hi-gloss of approved quality-
Two coats (with any shade except white)
2200
-
-
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Luxury Quality(Two coats)
1750
-
-
L. GLAZIER’S WORK:
A. ORIGINAL WPRLS:
Supplying and affixing optically clear polyester sun control window film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other, with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTM E308, ASTM E903, ASTM E84 and ASHIRAE. The film should be pasted after preparatory works without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion along the length doesn't exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer's specification & direction of Engineer -in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)
Superior Quality : Film Thickness - 2.0 Mil, Glare Reduction 75%, U factor 1.03, Emissivity 0.70
164.14
-
-
DRAIN, DOWN PIPES, CHIMNEY ETC.
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
UPVC Pipes:
110 mm. Dia.
50
-
-
UPVC Fittings:
Plain Tee
110 mm. Dia.
8
-
-
Plain Y
110 mm. Dia.
8
-
-
Bend 87.5 degree
110 mm. Dia.
8
-
-
Shoe
110 mm. Dia.
8
-
-
SOLING, EDGING & METALING:
Providing and fixing at or near ground level precast cement concrete in kerbs (size: 450 mm x 350 mm x width 150 mm at bottom with bevelled nosing at top) of cement concreat M20 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for at least 3 days including cost and carriage of all materials complete.
250
-
-
Supplying cinder including throwing spreading rough levelling and dressing.
(Measurement will be taken on the basis of profile, before and after the work with deduction of 1/9 th of the volume for sinkage and / shrinkage).
173
-
-
Labour for taking out old soling edging including removing debris
Single flat soling
1200
-
-
ALUMINIUM WORKS :
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer – In-Charge. (Payment will be made on finished length of the work).
15 Micron colour annodizing.
Rimless door.
Top & bottom rail.
40
-
-
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:
Fully glazed single leaf reamless swing door made of anodized aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydraulic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine/EPDM gasket.
The rate includes the hire charge of all tools and plants, adhesive, joineries but excludes the cost of extruded aluminium sections, glass, panel boards EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt etc.
8
-
-
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
12mm thick coloured / tinted / toughened glass conforming to IS: 2553-1992 (Part-II)
35
-
-
Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming to IS: 1868-1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in-charge. ( Payment will be made on finished length of the work). 15 micron colour anodising Structural glazing /Curtain Wall
Mulion & Transom (Weight @ 1.819 Kg Per Mtr.)
405
-
-
Sub frame for fixing Glass (Weight @ 0.31 Kg per Mtr.)
60
-
-
Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge. for Structural Glazing/Curtain wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work
930
-
-
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987
Clear, toughened glass conforming to IS: 2553-1992 (part-II)
6mm thick Providing and fixing of factory made uPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided.
Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)
165
-
-
2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm
30
-
-
Providing and placing structural metal decking system of grade TR60 as per JSW structural metal decking ltd or approved equivalent of nominal thickness 0.90 mm R.C.C having maximum thickness of slab 130 mm and entire process of fixing of deck materials as per manufacturer's specifications
709
-
-
Providing and fixing 12mm thick machine compressed clay and burnt brick tiles of size 250 mm x 75 mm of Shree Balaji tile company or approved make in skirting, risers of steps and dados fixed with tile fixing adhesive of Sika / Pidilite make and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per drawing & direction of the Engineer in charge.
465
-
-
Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit.1 mm thick powder coated Aluminum perforated Metal False ceiling of 595 X 595 finished dimensions to be placed in the grids of the ceiling. All complete as per the drawing & directions of Engineer-in-charge at all heights as per the designs.
1 mm thick powder coated Aluminum plain / perforated Metal False ceiling of 595 X 595 finished dimensions.
700
-
-
Supply, Fabrication, Installation, Testing (onsite water tightness), Projection, Cleaning & Handover of respective cladding made of ALUMINIUM profile sheet (minimum 1.5 mm thick) with ANIDISED coating. The thickness of the coating of Aluminium shall be minimum 25 MICRON full height cladding maximum height 15 mtr and minimum 10.23 mtr. MS structure will cladd with 12 mm thk CEMENT FIBRE BOARD, and fixed with 38 x 6 mm ss screw grade 304, C-channels' made with SS sheet and wall thickness will be 2.5 MM thk for fixing of Aluminium cladding etc. The quoted rate shall include all Taxes, duties, and safety code compliance as required. Rates are inclusive of all accessories including labour & material.
1030
-
-
Supplying, fitting and fixing brass ferrule including connection with G.I. pipes of TATA make of following dia. and upto 450 mm long with screw, jamnut,sockets etc.,complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer - in - Charge.
25 mm dia.
1
-
-
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
3
-
-
Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).
3
-
-
Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
3
-
-
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
40 mm dia
1
-
-
32 mm dia
1
-
-
25 mm dia
1
-
-
20 mm dia
1
-
-
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
3
-
-
Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
6
-
-
Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
4
-
-
Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect.
25 mm
30
-
-
32mm
10
-
-
40 mm
20
-
-
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007. with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including
all specials. No separate payment will be made for accesories, specials.
For Exposed Work.
CPVC Pipes Class-1, SDR-11
25 mm
20
-
-
32 mm
20
-
-
40 mm
50
-
-
For Concealed Work
CPVC Pipes Class-1,SDR-11
15 mm
10
-
-
20 mm
40
-
-
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
550 mm X 400 mm size
3
-
-
Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
300 mm long
6
-
-
Supplying, fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
750 mm long
6
-
-
Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality)
Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
3
-
-
Supplying, fitting and fixing pillar cock of approved make.
CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).
3
-
-
Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials, payment for specials & Painting will be paid seperately).
With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.
100 mm dia. (internal)
20
-
-
75 mm dia. (internal)
50
-
-
Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/1970 including joining and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
With valamoid joints including sealing the top with cement mortar (4:1)
100 mm dia.
2
-
-
Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately).
With valamoid joints including sealing the top with cement mortar (4:1)
100 mm dia.
6
-
-
Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately).
100 mm dia.
4
-
-
Supplying, fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately).
'P' Trap
50 mm
3
-
-
Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides).
300 mm
50
-
-
Supplying, fitting and fixing C.I. round grating.
100 mm
6
-
-
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
470 mm X 280 mm X 340 mm
3
-
-
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.
450 mm X 300 mm
3
-
-
Supplying, fitting and fixing glass shelf with aluminium guard rails.
(a) Ordinary type with 5.5 mm sheet glass
(b) 600 mm X 125 mm
3
-
-
Supplying, fitting and fixing soap holder.
PTMT(Prayag or equivalent)
3
-
-
Supplying, fitting and fixing towel rail with two brackets.
C.P. over brass
25 mm dia. and 450 mm long
3
-
-
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
With Pakur variety.
10
-
-
Supply, fitting & fixing of water closet & flushing cistern of HINDWARE, model no 20089 with all fixtures complete
3
-
-
Supplying, fabricating and fixing of MS Single Leaf Sliding Gate which is made by 96mm x 48mm x 3.2mm MS tubular section for main frame of YST 310 grade as per IS 4923 with fully covered by 2mm thk. MS Sheet and MS tubular Supporting Post Structure and Bottom rail with ISMB-125 & 22dia Bright Rod with One coat of epoxy primer and two coats of PU finish paint (as per KoPT approved color) with all mechanical accessories, i.e. Nylon Upper Guide Roller with bearing, Wheel assembly with double side bearing, End Catcher, Back Stopper, Locking assembly, Motor Base frame etc. and necessary cleats and insert plates complete as per the proposal drawing which will be provided by Ascon.
Clear Opening- 6500mm (W) x 2400mm (H)
1
-
-
Supplying, fabricating and fixing of MS Bi- parting Telescopic Gate which is made by 96mm x 48mm x 3.2mm MS tubular section for main frame of YST 310 grade as per IS 4923 with fully covered by 2mm thk. MS Sheet and MS tubular Supporting Post Structure and Bottom rail with ISMB-125 & 22dia Bright Rod with One coat of epoxy primer and two coats of PU finish paint (as per KoPT approved color) with all telescopic mechanisms & mechanical accessories, i.e. Nylon Upper Guide Roller with bearing, Wheel assembly with double side bearing, End Catcher, Back Stopper, Locking assembly, Motor Base frame etc. and necessary cleats and insert plates complete as per the proposal drawing which will be provided by Ascon.
Clear Opening- 6500mm (W) x 2400mm (H)
1
-
-
Supplying, fabricating and fixing of MS Double Leaf Swing Gate which is made by 96mm x 48mm x 3.2mm MS tubular section for main frame of YST 310 grade as per IS 4923 with fully covered by 2mm thk. MS Sheet with One coat of epoxy primer and two coats of PU finish paint (as per KoPT approved color) with all necessary mechanical accessories i.e. Hinges, Hatch Bolt, Locking assembly etc. as per the proposal drawing which will be provided by Ascon.
Clear Opening- 4000mm (W) x 2400mm (H)
1
-
-
Supply of Automatic Single leaf Sliding Gate Operator – 1no.
Make – DITEC (Italy)
Model – Cross 18VE
Including :
1. 1 no. Push Button.
2. 1 no. Remote Control with Receiver Card.
3. 1 pair Safety Photocell.
4. 1 no. Flusher/ Blinker.
5. 8 nos. Module-4 Gear Racks with fixing studs.
1
-
-
Supply of Automatic Bi- Parting Telescopic Gate Operator – 2nos.
Make – DITEC (Italy)
Model – Neos 1000EH
Including:
1. 1 no. Push Button.
2. 1 no. Remote Control with 2nos. Receiver Card.
3. 1 pair Safety Photocell.
4. 1 no. Flusher/ Blinker.
5. 6 nos. Module-4 Gear Racks with fixing studs.
1
-
-
Electrical Work for laying of control cables for fixing of control switch, blinker, safety photocell for Automatic Single Sliding Gate & Automatic Bi-parting Telescopic Gate.
1
-
-
Installation Charges for Automatic Sliding Gate, Automatic Bi- parting Telescopic Gate & Manual Double leaf Swing Gate including Loading, Unloading, Transportation.
1
-
-
a. Supply of Hydraulic Road Blocker : 5mtr
Make- Toshi Automation
Model-Toshi HRB
(4 nos.)
b. Electrical Work for laying of control cables
fixing of Push Button of Hydraulic Road
Blocker.
(ls.)
c. Installation Charges of 4 nos. Hydraulic Road
Blockers.
(ls.)
1
-
-
6 passenger Stainless Steel Auto Lift along with transportation, installation
1
-
-
PART B: Development of area outside of 4 no. NSD main gate & rail gate, N.S.Dock. Earth work in excavation of the foundation tranches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoils within a lead of 75Mtr as directed. The Item including necessary trimming the sides of tranches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not exceeding 1500 mm.
25
-
-
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. in ground floor including roof.
above 150 mm. thick
5
-
-
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars in ground floor including roof.
3
-
-
Dismantle all types of Masonry excepting cement concrete plain or reinforced, stacking serviceable Materials at site &removing the rubbish as directed within a lead of 75 Mtr in ground floor including roof.
5
-
-
Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity),
45
-
-
Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.
100
-
-
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking
serviceable and unserviceable materials separately as
per Technical Specifications Clause 202 for Rural Roads
of MORD. By Manual Means Granular coarse
10
-
-
By Mechanical Means Bituminous Courses
10
-
-
Water Bound Macadam Base Course
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
a) Grading-I Aggregate (63 mm to 45mm) using stone screening Type-B (11.2 mm) By Manual Means.
40
-
-
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
450
-
-
Hire and labour charges for the shuttering with centering and necessary staging up to 4Mtr using approved stout props and 25 mm to 30 mm thick hard wood planked with required bracing for concrete slabs beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of the works (up to roof of ground floor) as per the direction of Engineer – In – Charge.
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
50
-
-
Provide Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 mTor steel/Mild steel. SAIL / TATA / RINL
8
-
-
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.
Pakur Variety
5
-
-
Labour for laying soiling with departmental concrete block(200x100x100)mm collected from dumping location ,carriage of same with a lead up to 5.00 Km from loading area including loading, unloading and stacking at working site also preparation of bed as necessary concrete block joints properly filled in and packed with conc. Block joints properly filled in earth all completeas per direction of Engineering in Charge(Rates includes cleaning of existing concrete block surfaces).
Single concrete block flat soling (Thickness 100mm)
200
-
-
Supplying ready mixed concrete of M 40 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc.
inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item.[cement to be supplied by the Manufacturer/ supplier]
In ground floor and foundation. Without approved concrete pump.
120
-
-
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.For structural members of specified sections weighing less than22.5 Kg./m
0.2
-
-
Provide and lay bricks work with 1st class bricks in cement morter (1:6). In foundation and plinth
5
-
-
Provide and lay Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
15 mm. thick plaster with 1:6 Cement morter
100
-
-
Provide and lay Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.
Note: cement 0.152 Per Cum per 100 sq. Mtr.
100
-
-
Cleaning rubbish, sludge, liquid earth, mud , debris and other materials etc. from kutcha/Pucca surface drain of any size and upto 1.8 m deep including stacking the spoils within a lead of 75 mt by manual means.(Payment will be made on the basis of actual measurements of spoils in dry condition).
100
-
-
Supply Air Compressor Machine including labour ,operator, fuel permit etc. for 8 hours
2
-
-
Providing and laying reinforced cement concrete pipe NP4 with spigot socket for culverts on first class bedding of granular material in double row including fixing with cement mortar 1:2 as per Technical Specification Clause 1106 for Rural Roads of MORD.
600 mm dia
30
-
-
Labour charges for levelling dressing the existing uneven metal surface by manul means and watering and rolling sub grade by power roller to proper camber and grade including watering as per direction and satisfaction of Engineer -In-Charge for proper consolidation and to make the surface properly for further any layer.
400
-
-
Supply & spreading ShaliFloor MDH metalic floor hardening compound at the surface of the concrete for heavy traffic yard after compaction but before its finishing to increase resistance to abrasion & resistant to mechanical wear and the hardener should be compacted with a power trowel / floater. Broom or line texturing in transveres direction shall be provided at the surface after finishing and floating .
400
-
-
Providing and laying sealing compound (polysulphide sealent) of approved make & manufacture in joints of concrete pavement as per drawing including applying a coat of sealent primer of approved brand with top as concave surface having 3mm depression in the middle of the joint including cost of backer rod of size 10 mm dia at the bottom of the groove (size 8.0 to 10.0 mm wide and 22.00 mm deep)including cost of all accessories , all materials , transportation, cleaning of joints by blower all complete including application by a authorazed applicater or the manufracturer as per manufracturer's specification all complete.
120
-
-
Provide and apply two coats decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (Plastered or concrete surface) as per manufacturer’s specification.
In ground floor.
200
-
-
Cutting / Cleaning/Removing jungles including area of dock and removing spoil up to uprooting/Removing of rank vegetation, cutting grass, brush wood, cutting/removing small tree saplings or branches of trees falling under the cutting area at different 50 m outside the periphery of the area cleaned as per direction including all lead , lifts cutting instruments , labour etc complete in all respect.
500
-
-
PART C: ELECTRICAL INSTALLATION WORK FOR 4 NSD GATE AT KDS, KOPT MAIN PANEL :
Incoming:
1 No.– 200A, 4P MCCB (Icu=35/36 KA, Ics=100%, Icu) Microprocessor Release with Electrical interlocking arrangement and extended rotary operated mechanism.
1Set(3 Nos.)-C1-1 Current Transformer
1Set-C1 CT operated digital multifunction meter showing current, voltage and frequency.
1Set – 3 Nos. R-Y-B Phase indication Lamp with HRC Fuse Protection.
Bus Bar
1 Set-3 Nos. 30mm x 5 mm and 1 No. 30 x 5 mm for neutral, tinned Cu busbars covered with colour coded MKV graded PVC sleeves, mounted on Porecleam/DMC/SMC Insulators, (500V, 400A rating)
Outgoing
5 Nos.-100A-415V,4PMCCB,Icu=25KA(C-Curve)
Earth Bus Bar
24 mm x 6 GI flat earth bus bar running along the base of the frame covering entire length of the panel with GI bolt and nuts and number of drilled holes as required for earth connection.
1-Danger Board.
Complete Board as stated above.(Non-scheduled Item).
1
-
-
DISTRIBUTION BOARDS
Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment
4 WAY TPN DB (Upto 250A)
1
-
-
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
4 WAY TPN MCB DB- Enclosure (607715)
1
-
-
8 WAY TPN MCB DB- Enclosure (607717)
1
-
-
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.
6-32A SP MCB
36
-
-
63A TPN MCB
2
-
-
Earthing and Accessories:
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 mtrs long and 1 x 4 SWG GI (Hot Dip) wire (4 mtrs long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers including supply and fixing of 15 mm dia GI pipe protection (1 mtrs long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below.
For Soft Soil
2
-
-
Treatment of soil by using salt and charcoal or coke for plate electrode (for soft soil/morrum soil).
2
-
-
Providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 Nos 12 mm dia holes on the GI pipe.
2
-
-
Connecting the equipments to earth bus bar including supply and fixing of GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc, as required and mending good the damages.
6 SWG
100
-
-
8 SWG
50
-
-
Supplying and fixing of earth bus bar of galvanized (Hot Dip) M S flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing driled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc, as required.
60
-
-
LT Cable and Accessories
Supply of XLPE/PVC insulated, Armoured/ Unarmoured/ Flexible, Aluminium conductor( all rates are excluding of vat).
Power Cables
4C x 16 Sq.mm Aluminium / A2XFY (For Lift)
60
-
-
3.5C x 70 sq mm armoured Aluminium cable.
60
-
-
3.5C x 120 sq mm armoured Aluminium cable.
800
-
-
4C x 10 sq mm armoured Copper cable.
20
-
-
Laying on Wall / surface with Saddles / clamps
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
60
-
-
Laying of cable above 3½ core 50 sqmm and upto 3½ c ore 90 sqmm on wall/surface including S & F MS clams withearthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting
100
-
-
Laying through RCC/Hume/GI Pipe
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4core.
20
-
-
Laying of 3.5C x 120 sq mm armoured Aluminium cable through Micro tunneling
150
-
-
Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/Hume/ GI Pipe/ masonary trench for single, 2, 3, 3½ & 4core.
800
-
-
Compression Glands :
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
For 4 core 10 to 16 sqmm
10
-
-
For 3.5 core 185 sqmm
2
-
-
For 3.5 core 120 sqmm
2
-
-
Finishing cable ends :
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
4 core 10 sqmm cable
2
-
-
4 core 16 sqmm cable
2
-
-
For 3.5 core 70 sqmm
2
-
-
For 3.5 core 120 sqmm
2
-
-
SWITCH BOARD & SOCKET OUTLETS:
Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.
12 Module(2 Row)
18
-
-
Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having to cover plate and making necessary connections as required
10
-
-
Supply & Fixing 240 V, 10 A, 2(Two) way Modular type switch (approved make) on existing GI Modular switch board having top cover plate and making necessary connections as required
10
-
-
Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc
10
-
-
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
15
-
-
Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
24
-
-
Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.
350
-
-
Supply & Fixing Telephone socket Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required.
2
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing recessed PVC/Polythene conduit, as required.
60
-
-
Supplying and fixing of following modular TV Antenna socket outlet on the existing modular plate and switch box including connections but excluding modular plate etc, as required.
4
-
-
SUB-MAIN CIRCUIT & POINT WIRING :
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
500
-
-
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [For Circuit & 16A Socket]
460
-
-
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [For AC]
200
-
-
3 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC [For DB]
50
-
-
POINT WIRING - MCB / Sensor Control
Supply, Installation, Testing and Commissioning of point wiring using (3 x 1.5) Sqmm 1100V grade stranded FRLS wires of approved make drawn in 19 mm dia 2mm thick rigid PVC conduit of approved make including all conduit accessories such as bends, junction boxes etc., complete. The wiring shall be done in complete looping in system. The lighting control from MCBs/SB in DBs. The wiring shall be complete with ceiling roses, switches and all consumables.
PRIMARY LIGHT POINT
I. Primary light point means wiring from MCB control in DB/Switch board to the first light point.
II. For drops from the ceiling flexible conduit shall be included.
60
-
-
SECONDARY LIGHT POINT
I. Secondary light point means extention of light out let only from existing . Primary point to be controlled by the existing MCB of Primary point only.
II. Ceiling flexible conduit shall be included at the drop of light fixture.
220
-
-
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.
On Board
5
-
-
Average run 4.5 mtr
15
-
-
PVC conduit
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling and recessed with saddles and other accessories as required and mending good damages to building works.
20 mm size
500
-
-
25 mm size
4006
-
-
SUPPLY & FIXING OF LIGHTING FIXTURES AND FAN: Supply, installation, assembling, testing and commissioning of the following Light Fixtures with complete accessories, control gears, civil works complete in all respect as per technical specifications and drawings.
The quoted rate shall be inclusive of fixtures and accessories including all necessary supports, brackets, down rods and painting etc. as required.
38W LED PANEL LIGHT (600 X 600 ) Fittings complete with all and duly interconnection wire. [Philips Cat No. CIRUS RC/SM 365/366] or equivalent].
112
-
-
WALL MOUNTED LIGHT FIXTURES complete with all and duly interconnection wire. [Philips Cat No.SNF114 1xSONT250W NB ] or equivalent].
28
-
-
Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set.
2
-
-
HIGH BAY LIGHT FIXTURES complete with all and duly interconnection wire.
28
-
-
RECESSED MOUNTED LIGHT FIXTURES complete with all and duly interconnection wire.
30
-
-
Supply, installation, testing & commissioning of 1 x60 W(min) decorative Post Top light fixture with all required accessories complete in all respect as per technical specification, drawings & as required at site .
10
-
-
Supply & fixing of 1200mm dia sweep 3 blade ceiling fan complete with all required accessories as per technical specification & drawings.
4
-
-
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
4
-
-
Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages.
4
-
-
Supply, installation, testing & commissioning of Recess Mounted LED light fixture with all required accessories complete in all respect as per technical specification, drawings & as required at site .
11
-
-
Supply, installation, testing & commissioning of 1X12W down light fixture with all required accessories complete in all respect as per technical specification, drawings & as required at site .
15
-
-
Supply, installation, testing & commissioning of Vetro Wall Sconce, 13W LED, light fixture with all required accessories complete in all respect as per technical specification, drawings & as required at site .
15
-
-
Supply and fixing of Metal Boxes
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.
100 mm x 100 mm x 65 mm deep
20
-
-
150 mm x 100 mm x 65 mm deep
30
-
-
Supply and fixing of Bakelite
Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required
100 mm x 100 mm x 65 mm deep
20
-
-
Supply & fixing of addressable Photoelectric Smoke Detector, include base
14
-
-
Supply & fixing of addressable Photoelectric Heat Detector, include base
10
-
-
Supply & fixing of Four loop addressable Fire Alarm Control Panel,198 points (99 detectors+99 devices), with backlight illumination, 2 Sounder circuits Requires network card
1
-
-
Supply & fixing of addressable manual call point.
6
-
-
Supply & fixing of addressable Loop isolation module.
4
-
-
Supply installation and testing and commissioning of 2 x 1.5 sq.mm armoured cable for wiring of necessary sensing device to the panel with adequate size PVC casing / pipe with all sorts of fixing materials and accessories required.
200
-
-
Supply and installation of response indicator
25
-
-
Supply and installation of 4" x 4" metal Junction Box
25
-
-
Supply & fixing of addressable Intelligent Wall Mounted Sounder
10
-
-
ISI marked ABC type fire extinguisher conforming to IS: 13849 (5Kg)
15
-
-
ISI marked CO2 type fire extinguisher conforming to IS: 2878 (4.5Kg)
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements