Kolkata Port Trust Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Kolkata Port Trust - KOPT Tender
Civil And Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date12 Nov 2024
Closing Date3 Dec 2024
Tender Amount₹ 2,20,02,566
Costs
EMD
₹ 4,40,052Document Cost
₹ 2,950Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_KoPT_834563_1Tender No
SMPK/KDS/CIV/T/2905/87Tender Authority
Kolkata Port Trust ViewPurchaser Address
-Website
http://http://www.kolkataporttrust.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
In 1st Floor
65
50
3250
In 2nd Floor
15
100
1500
In 3rd Floor
4
150
600
Dismantle all types of plain cement concrete works up to 150 mm thick stacking serviceable Materials at site andremoving rubbish as directed within a lead of 75 Metre in ground floor including roof.
8
939
7512
In 1st Floor
2
50
100
In 2nd Floor
2
100
200
In 3rd Floor
1
150
150
Dismantle R.C. floor, roof beams etc. including cutting rods andremoving of rubbish as directed within a lead of 75 Mtr including stacking of steel bars in ground floor including roof.
12
1956
23472
In 1st Floor
2
50
100
In 2nd Floor
2
100
200
In 3rd Floor
2
150
300
Dismantling aritificial stone flooring upto 50 mm. th. By carefully chiselling without damaging the base andremoving rubbish as directed within a lead of 75 m.
60
50
3000
1st floor
20
6
120
2nd floor
10
12
120
Dismantling of all assorted item that includes Wall Partition / false ceiling made of Wood Ply Board, masonite board , Aluminium Partition Door / Window frames , glass etc. of any thickness with frame, shifting and stacking the material as decided by SMP Kolkata within a lead of 75 Mtr. all complete .
650
35
23270
Dismantle carefully wood work in posts post plates rafters partition etc. sorting and stacking serviceable materials at site and removing rubbish as directed .
2
278
556
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
1500
19
28500
Taking out carefully M.S or W.I Grills / M.S framed gratings windows with shutter including cutting lugs from masonry wall with necessary labours, tools & tackles etc. all complete as per direction of EIC.
170
334
56780
Provide and lay Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
60
361
21660
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety
7
6876
48132
In 1st Floor
1
95
95
In 2nd Floor
1
190
190
In 3rd Floor
1
285
285
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
15
7611
114165
In 1st Floor
2
95
190
In 2nd Floor
2
190
380
In 3rd Floor
2
285
570
Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).Applicable only when the full diameter of reinforcement steel is exposed.
150
309
46350
Provide and lay 35 mm. thick artificial stone in floor dado, staircase etc. with cement concrete (1:2:4) with stone chips with 3 mm. thick topping Made with ordinary/ white cement (as necessary) Marble dust in proportion (2:1) including smooth finishing and rounding of corners and including application of cement slurry before flooring works using cement @ 1.75 kg. / sq. Mtr. all complete including all Materials and labour. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).
Using grey cement in ground floor.
50
337
16850
Extra rate for using water proofing and plsticising admixture @ 0.2 percent by weight of cement (or at manufctures specified rate ) for concrete of various grade .
100
119
11900
Hire and labour charges for the shuttering with centering and necessary staging up to 4Mtr using approved stout props and thick hard wood planked with required bracing for concrete slabs beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of the works (up to roof of ground floor) as per the direction of Engineer – In – Charge. Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work.
50
369
18450
In 1st Floor
10
18
180
In 2nd Floor
10
36
360
In 3rd Floor
10
54
540
25 mm to 30 mm shuttering without staging in foundation
20
209
4180
Provide Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m
Tor steel/Mild steel. JSW/JSPL/SHYAM/ SRMB/BMASL /ELECROSTEEL /SSL
2.5
60150
150375
In 1st Floor
0.5
480
240
In 2nd Floor
0.5
960
480
In 3rd Floor
0.75
1440
1080
Polymer Modified Morter(Brick Work): building up the profile of masonry members upto 20 mm by using emulsified SBR latex conforming to ASTM C-10592013 Type-II,I cement (OPC as per IS 8112)-3 part graded cleaned river sand (zone I sand as per IS 3832016) + 15-20 % latex by wt of cement) with .35 w/c ratio, and having 38 % solid content, in 10 -15 mm thick layers by applying bond coat between successive/each layers including levelling & profiling complete. Proper curing shall be done for the repair work. Gunny bags may be used for effective curing. Polypropylene fibres (Recron or equivalent)shall be added to reduce shrinkage. Polypropylene fibres @ 1 kg/cum shall be added to achieve homogeneity in PMM mix.70.2x70.2x70.2 mm cube shall be taken as representative sample to achieve 28 days compressive strength of 30 MPa at 28 days compressive strength of 30 MPa at 28 days of curing in water. The item rate includes the rate for bond coat to be applied between layers. Bond coat shall be prepared by mixing 60 ml of Latex in 100 gms of cement.
150
940
141000
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces bysand papering etc.(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
250
38
9500
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
700
29
20300
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface, if necessary Two coats on timber or plastered surface (with any shade except white) With super gloss (hi-gloss)
250
81
20250
Two coats (with any shade except white) With super gloss (hi-gloss) on steel surface.
700
79
55300
Provide and lay bricks work with 1st class bricks in cement morter (1:6). In foundation and plinth
4
5413
21652
In superstructures, ground floor.
110
5636
619960
In 1st Floor
65
111
7215
In 2nd Floor
20
222
4440
In 3rd floor
5
333
1665
Providing and lay 125 mm. thick bricks work with 1st class brick in cement morter (1:4). In ground floor
80
736
58880
In 1st Floor
70
12
840
In 2nd Floor
5
24
120
Provide and lay plaster to wall, floor, and ceiling with sand & cement morter (6:1) including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface by chipping, etc., including throating, nosing and drip course where necessary in ground floor.[Excluding cost of chipping over concrete surface] Ground floor
20 mm. thick plaster.
1500
175
262500
In 1st Floor
750
4
3000
In 2nd Floor
350
8
2800
In 3rd Floor
50
12
600
Provide and lay Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
15 mm. thick plaster with 1:6 Cement morter
For ground floor
700
151
105700
In 1st Floor
200
4
800
In 2nd Floor
200
8
1600
In 3rd Floor
100
12
1200
10 mm thick Plaster with 1:4 cement mortar
For ground floor
400
133
53200
In 1st Floor
125
4
500
In 2nd Floor
175
8
1400
Provide and lay Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.
Note: cement 0.152 Per Cum per 100 sq. Mtr.
100
34
3400
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). For Ground Floor
4900
122
597800
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.[This item to be done under specific instruction of the Superintending Engineer]
In Ground Floor one coat
2000
31
62800
In 1st Floor
600
-
426
In 2nd Floor
600
1
852
In 3rd Floor
250
2
532.5
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat) Premium 100% Acrylic Emulsion
2000
84
168000
In 1st Floor
600
-
426
In 2nd Floor
600
1
852
In 3rd Floor
250
2
532.5
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Engineer -in charge) : Two coats Standard Quality
2900
62
179800
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
one coat Water based interior grade Acrylic Primer
2900
30
89320
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.
Two Coats
550
70
38500
Supply of daily labour for various non measurable works like claning,segregating shifting and stacking of serviceable materials for 8.30 Hrs. including 30 min. recess
100
863
86358
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.(Add extra @ 1.2 % for each additional floors upto 4th floor and @ 1.5% for each addl. Floor above 4th floor.)
Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars. [The extra rate admissible for the
openable portion only]
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of
workmanship)
In Ground floor
5
2199
10995
M.S. integrated grill as per approved design integrated with
steel window or ventilator, joints continuously welded with M.S. flats and bars
(The weight of grill will be determined (theoritically) from section of
the grills actually used excluding the rolled steel section of the
window / vent. The weight of the grill should be calculated at 7.85
gm./ cu.cm.)
150
94
14100
Supply best Indian sheet glass panes 3 mm thick (weighting 7.4 kg. / Sq. Mtr.) Set in putty and fitted and fixed with nails and putty complete in all floors for external wall & upto 6 Metre height for external walls.
10
477
4770
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
35 mm thick shutters (single leaf)
15
2659
39885
Supplying fitting & fixing Marble slab/tile of 15 to 18 mm. thickness in floor,lobby,stair, landing treads etc. over 20 mm. (av.) thick base of cement mortar (1:2) laid with white cement slurry @ 2.0 Kg /Sqm with necessary pigments including grinding and granite polishing asper direction of engineer in charge .in ground floor.(White cement and pigment to be supplied by the agency ) With Makrana plain pink/Adranga Pink /Garbh Gulabi /Udaypur Pink/Udaypur Green /Black Bhaslana. Area of each Slab/Tile exceeding .60 sqm but not exceeding 1.00 sqm .
15
1923
28845
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.
50
279
13950
Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S.
frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5
mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in- Charge.
20
2438
48760
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
sal local
0.2
77671
15534.2
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
(a)100X58X1.90 mm
20
84
1685
(b) 75x47x1.80 mm
10
62
628
Anodised aluminium barrel / tower / socket bolt (full covered) of approved
manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
(iii) 100mm long x 10mm dia. Bolt
20
53
1060
(iv) 150mm long x 10mm dia. Bolt
15
63
945
(viii) 225mm long x 12mm dia. bolt.
5
114
570
Provide iron door ring of dia 50 mm. of approved quality fitted and fixed with nuts and washer complete.
30
17
510
Provide and fix 250 mm long Iron hasp bolt of approved quality fitted and fixed complete (anodised) with 16 mm dia rod with centre bolt and round fittings.
10
159
1590
Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.
5
1081
5405
Provide Door stopper (Anodised aluminium)
40
70
2800
Provide Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete. 150mm plate x 10mm dia rod x 12mm hexagonal/fluted.
30
87
2610
Provide M.S. clamp for fixing door and window frame made of 40 mm. x 6 mm. 200 mm long flat bent bar end bifurcated fixed in cement concrete with stone chips (4:2:1) fitted and fixed as per direction (cost of cement concrete will be paid separately.
40
25
1000
Supplying,fitting & fixing granite slab 15mm to 18mm thick in
floor, lobby, stair, landing and treads etc. over 20mm (avg)
thick base of cement morter (1:2) laid with white cement slurry
@ 4.40Kg per Square meter before placing of granite and
jointed with white cement slurry @ 2.0 Kg per square meter
with necessary pigments and complete as per direction of
Engineer-in-charge including cost of all materials, labours,
curing and roughening of concrete surface complete.
In ground floor
Area of each Granite slab 0.6 to 1.0 Square meter.
10
2774
27740
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamp nails, including Making holes in walls, floor etc. cutting trenches in any soil through Masonry concrete structures etc if necessary and mending good damages including joining with jointing Materials (Spun Yarn, Valamoid/bitumen/M-Seal etc) complete.
UPVC Pipes:
160 mm. Dia
50
485
24250
Bend 87.5 degree 160 mm. Dia.
6
346
2076
Provide M.S. or W.I. ornamental grill of approved design, joints continuously welded with M.S. W.I. flats and bars for windows railing etc. fitted and fixed with necessary screws and lugs, in ground floor.
i) Grill weighing above 10 kg/sq. m. and up to 16 Kg. / Sq. m. The weight of grill per sq. m. will be determined by taking the physical weight of fabricated grill and dividing the same by covered area of the same. No shop priming will be allowed to facilitate inspection of workmanship. Weight of grill is to be taken after final grinding and finishing the weld.
6
9888
59328
Collapsible Gate with 40 mmx40mm.x6mm. Tee as top and bottom guide rail 20mm.x10mm.x2mm. Vertical channels 100mm. Apart in fully stretched position 20mm.x5mm. M.s flat as collapsible bracings properly riveted and washered including 38mm. Steel rollers including locking arrangements fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes chasing etc. in walls floors etc. and making good damages complete . in ground floor .( payment will be made on the area of gate covered by two guard rails and two extreme channels ).
10
4330
43300
Supplying and laying true to line and level Vitrified tiles( Antiskid) of approved brand ( size 600 mm. x 600 mm. x 8 to 8.5 mm. thick ) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91 Kg./Sq.M or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sq.M below mortar only,joints grouted with admixture of white cement and colouring pigmant to match with colour of tiles/ epoxy grout materials of approved make as directcted and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials. Labours and all other incidental charges complete true to the manufaurer specification and direction of Engineer in Charge.(White cement synthetic adhesive and grout material to be supplyed by the Contractor). With application of slurry @ 1.75 Kg/Sq.M. 20 mm sand cement morter (1:4) and 2 mm thick cement slurry at back side of tiles, 0.2 Kg/Sq.M white cement for joint filling with pigment light Colour.
1000
1140
1140000
For 1st Floor
500
12
6000
For 2nd floor
500
24
12000
Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge
500
166
83000
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 Per Nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile above 0.09 Sq.m
(i) Coloured decorative
200
1109
221800
Floor
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(b) Area of each tile above 0.09 Sq.m
(i) Coloured decorative
60
920
55200
Hire charges of Earth movers / Excavator -cum -loader for 8 hours. including one no operator , one no. helper ,fuel etc. The rate inclusive of all expenses etc complete.
5
11057
55289.6
Supply Air Compressor machine including labour, operator ,fuel, pump etc. For 8 hrs, at desired location all complete .
2
8855
17710
Welding in M.S. structural work with gas or electric:
Tack weld
500
9
4500
Continuous weld.
35000
9
315000
Supplying & placing in position OFFICE WORKSTATION of size 1.50 mtr x 1.50 mtr.x1.20 mtr. The table will be provided with one no pvc computer key board pull out tray ,one no.drawer unit (0.45x.525x.225 mtr.)The table top,sides,drawer front, sides and bottom to be made with 19 mm thick W.P.Board,12 mm thick BWP,and 6 mm thick BWR ply with laminated finished of 1 mm thick laminate of approved shade.The rate to include cost of all fittings and fixtures,the runner for drawer lock ,drawer handle, all of approved best make all complete with labour and materials as per drawing and direction of EIC.
50
38500
1925000
Providing & installing POLYESTER INSULATING FILM as specified below of M/S Garware polyester or approved equivalent ) on glasses of doors / partitions including thorough cleaning of glass surfaces, scaffolding etc. with all labour & materials complete as per manufacturer's specifications & direction of the Engineer-in charge. Frosted film 1.5 mil .(25 micron)
300
550
165000
Supplying and affixing optically clear polyester sun control window film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other, with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTM E308, ASTM E903, ASTM
E84 and ASHIRAE. The film should be pasted after preparatory works without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion along the length doesn't exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer's specification & direction of Engineer -in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer. Superior Quality : Film Thickness - 2.0 Mil, Glare Reduction 75%, U factor 1.03, Emissivity 0.70
300
544
163200
Supplying & placing in position storage unit of size 1.500(h) mtr x 0.520 mtr x 1.240 mtr made with 19mm thick W.P. Board, 12mm thick BWP, and 6mm thick BWR ply with laminated finished of 1mm thick laminate of approved shade. The rate to include cost of all fittings and fixtures, lock, handle, all of approved best make all complete with labour and materials as per drawing and direction of EIC
50
30794
1539739.5
Supplying & placing in position storage unit of size 0.920 mtr x 0.520 mtr x 0.750 mtr made with 19mm thick W.P. Board, 12mm thick BWP, and 6mm thick BWR ply with laminated finished of 1mm thick laminate of approved shade. The rate to include cost of all fittings and fixtures, lock, handle, all of approved best make all complete with labour and materials as per drawing and direction of EIC
10
11851
118517.1
Supplying & placing in position Executive Desk of size 1.8 mtr x 1 mtr.x 0.75mtr.The table will be provided withone no pvc computer key board pull out tray ,one no.drawer unit (0.825 x 0.46 x 0.8Mtr).The table top,sides,drawer front, sides and bottom to be made with 19 mm thick W.P.Board,12 mm thick BWP,and 6 mm thick BWR ply with laminated finished of 1mm thick laminate of approved shade.The rate to include cost of all fittings and fixtures,the runner for drawer lock ,drawer handle, all of approved best make all complete with labour and materials as per drawing and direction of EIC.
2
30000
60000
Supply of motion high back chair with adjustable armrest of Godrej make .
2
11746
23492.04
Supply of Sally Mid back chair with adjustable armrest of Godrej make .
50
6204
310245
M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor a) Ground Floor
50
1159
57950
1st floor
450
1173
527850
2nd floor
450
1187
534150
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding
Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film
Natural white For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.
1400
448
627200
Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete.
Upto 5 mm depth and 5 mm width a) Ground Floor
b) Extra for each additional floor
650
72
46800
Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987.
vi) 6mm thick coloured / tinted / smoke glass.
200
661
132200
Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987. Clear toughened glass conforming to I.S 2553-1992 part -II
i) 6mm th..
10
957
9570
ii) 10 mm. th
10
1863
18630
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
1000
10
10000
Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.
6
1729
10374
Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not used).
6
297
1782
Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. (a) 200 mm long
3
61
183
(b) 250 mm long
3
67
201
Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White)
(a) 250 mm long
4
302
1208
(b) 300 mm long
4
332
1328
Supplying annodized aluminium extruded section box hinge for casement windows as per approved brand and make directed by Engineer- in - Charge.(Natural White)
4
44
176
(A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.
6
635
3810
(B) Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand.
(a) Natural Colour
2
181
362
(b) Colour
2
192
384
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S tube 1.5 m center to centre, horizontal & vrtical tubes joining with cup & lock system with M.S tubes, M.S tubes challies, M.S clamps and M.S staircase system in the scaffolding for working platfrom etc. and maintaining it in a serviceable condidition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer -in- charge. The elevation area of the scaffolding shall be measured for payment purpose. The payment will made once irrespctive of duration of scaffolding.
Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
1200
338
405900
Polymer concrete made with water resistant bonding agent of synthetic rubber emulsion as per manufacturers specification excluding the cost of cement concrete .(2.75 kg/ bag of cement ) Note: Payment on volume of (1:1.5:3 ) concrete .
4
4414
17656
Scantling upto 50 mm.wide and 12 mm. thick ( chamfering or rounding ) for ceiling / partition battens including fitting , fixing in position with washers , coach screws etc. complete Ordinary teak .
50
104
5200
Square or hexagonal mesh netting made with 18 B.W.G galvanised wire , fitted and fixed complete as per design ( excluding the supporting framework but including local sal wood battens of size 37,5 mm. x 25 mm. In ground floor 25 mm. mesh
25
391
9775
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. For Structural member of specified section weighing less than 22.5 kg/ m
5
72603
363015
Remove old scales, blisters, etc., of interior surface of walls, ceiling by scraping, etc., and preparing smooth and even surface with rendering of cement mortar (1:2) as necessary to make the surface suitable receiving distemper as per direction of the Engineer at site.
2900
10
29493
Scrapping of moss blisters etc. thoroughly from exterior surface of walls necessitating the use of scrapper , wire brush etc. ( Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge ).
2000
7
14000
Cement washing including cleaning and smoothening surface thoroughly (cement to be used @15 kg./100 sq.m. of surface for one coat and @25 kg./100 sq.m of surface for two coats):External surface (Ground floor) One coat
300
9
2745
Take out door and window shutters and rehanging the same with old fitting with new iron screws.
25
78
1950
Labour for taking out door and window frame including shutter for repair or replacement of different parts of theframe and refixing the same including mending good all damages complete. (Concrete and brick work for mending damage will be paid separately)
a) Upto area 2.5 Per Sqm.
15
119
1785
Easing doors and windows.
10
17
170
Fully glazed single leaf reamless swing door made of anodized alluminium alloy extrusions fabricating after cutting to proper shape and size drilling and alligning fitted with heavy duty hydraulic action floor spring with top pin assembley and fitted with inbuilt locking arrangement and all other necessary fittings , fixtures, adhesives and joineries , cutting the glass to requisite shape and size mounting the edges for fitting the samf with dry set neoprine /EPDM gasket.
10
1501
15010
Take out shutter of door and window dismantling by parts (for repair or replacement of damaged parts) reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 63 will be made once only).
10
126
1260
Provide and fix panel shutter of doors and window of 35 mm thick shutters with 19 mm. thick panel of size 30 to 45 cm with Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. as per design (each panels consisting of single plank without joint including the fitting and fixing the same in position but excluding the cost of hinges and other fittings in ground floor. In case of non-supply of single plank panel rate of reduction of 20% well be Made.
10
2948
29480
Provide woodwork in post ,postplates , rafters ,battens ,truss members , purlins , etc. fitted and fixed complete ( excluding the cost of bolts , paints but including the cost of nails , screws etc.) .The quantum should be corrected upto three decimals ) Sal -Malyasian .
0.25
83283
20820.75
Taking out rain water down pipe.
50
8
447.5
Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.
360
106
38160
Partition of commercial ply as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size 40mmx 25 mm):
In Ground Floor 12mm thick
5
1039
5195
Supplying, fitting and fixing boiling water resistant 12 mm ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor.
5
1290
6450
6 mm. Ply
30
923
27690
Hire charges of Diesel Truck-9 Tonne (with POL )
10
5759
57590
Spot application of insecticide using Aqua base spray for pest (for bugs,cockroaches,silverfish,spider,termites,moquitoes) to walls and ceiling etc. with chemical emulsion by admixture chloropyrofos emulsifiable concentrate (1% concentration ) with water by weight including spraying the emulsified chemical @0.5 litre per sqm by a hand operated pressure pump on wall surface, ceiling, electrical fixture, electrical lines including drilling holes in-places where sorce of termite is detected squirting chemical solution into the holes and sealing the holes with cement grout .(Rate is per sqm of the floor area while actual work will be all walls ceiling , rack , partition and furniture)
1500
49
73500
Supplying fitting & fixing Zn-alloy ( 55% Al & 45% Zn ) coating of 150 grams per sq. Metr. (followed by colour coated on both side ) steel sheet work having minimum yield strength of550 Mpa of trapezoidal profile of approved make (excluding the supporting frame work) fitted & fixed with 55 mm. & 25 mm. self tapping screw, EPDM washer 16 mm. dia. & 3mm. th. washer etc. complete with 150 mm. end lap and one corrugation minm. side lap (Payment to be made on area of finished work). In Roof With 0.5 mm, thick sheet.
100
787
78700
Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department].
150
88
13200
Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification][Mode of measurement:The affected surface area of reinforcement shall be considered for payment]
10
782
7820
Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.
20
90
1800
Supply of Cement:
PPC/PSC/
OPC(33 Grade)
(I)The above rates of items are including 10% contractors profit
0.5
6917
3458.95
Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado .
500
6
3000
Supplying, Fitting & fixing different factory made Metal Craft Sheet (excluding cost of metal crafting) incluing cost of powder coating (for M.S, Aluminium plate) & finished metal sheet with all fitting accessories complete in all respect as per diection of Engineer-in-Charge. Mild Steel Plate. i) 2.0mm thick
10
1627
16270
Part -B (Plumbing) Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made separately.)-FOR EXPOSED WORK-Medium quality G.I. Pipes. (i) 15 mm. dia Medium quality
40
192
7680
(ii) 20mm. dia Medium quality
60
226
13560
(iii) 25mm. dia Medium quality
30
305
9150
(iv) 40mm. dia Medium quality
40
415
16600
(v) 50mm. dia Medium quality
25
540
13500
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
(i) 15 mm
4
521
2084
(ii) 20 mm
5
657
3285
(iii) 25mm.
5
912
4560
(iv) 40mm.
4
1646
6584
(v) 50mm.
4
2362
9448
Supplying, fitting and fixing bib cock or stop cock.
(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
12
539
6468
(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
12
493
5916
(c ) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
25
815
20375
Supply, fit & fix approved brand PVC waste pipe with PVC coupling at one end fitted with necessary clamp – 32 mm dia
(a) 750 mm long.
6
59
354
(b) 600 mm long.
10
47
470
(c) 900 mm long.
20
75
1500
Supplying, fitting and fixing PTMT overhead shower of approved brand and make (Prayag or equivalent) -75 mm round.
5
179
895
Supplying, fitting & fixing 10 litres PVC low down cistern conforming to IS specification with PVC fittings complete CI brackets including two coats of painting to brackets etc.
5
1015
5075
Renewing high pressure polythene ballcock of approved quality with polythene ball and aluminium lever complete for pipe of dia.:
(a) 25mm. dia.
4
120
480
(b) 15mm dia.
1
71
71
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550mmx400mm size. -White in colour
5
2208
11040
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets- 530 mm X 430 mm x 180 mm.
3
3285
9855
Supply, fit and fix approved brand PVC connector white flexible with both end coupling with heavy brass over C.P. nut 15 mm dia - 450 mm long.
22
82
1804
Supplying, fitting & fixing Cast Iron "P" or "S" Trap conforming to IS 3989/1970 and 1729/1964 including lead caulked joints and painting two coats to the exposed surface (painting to be paid separately)without AS horn - 100 mm dia. “P” Trap.
1
948
948
Removing chokage of H.C.I. or S.W. pipe with split bamboo Over ground.
10
9
90
Under Ground
30
11
330
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).
(i) 580 mm X 440 mm
1
1613
1613
Supplying, fitting and fixing E.W.C. in glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc-with "P" trap. White in colour.
5
1421
7105
Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm.
5
223
1115
Supply, fit & fix best quality Indian make mirror 5.5 mm. Thick with silvering as per ISI specifications supported on fibre glass frame of any colour frames size 550 mm x 400 mm.
5
613
3065
Supplying, fitting & fixing towel rail with two brackets –CP over brass -25 mm dia and 600 mm long.
5
430
2150
Supplying, fitting and fixing flat back urinal( half stall urinal) in white vitreous china ware of approved make in position with brass screw on 75 mm x 75 mm x 75 mm wooden blocks complete.470 mm X 280 mm X 340 mm.
15
945
14175
Supplying, fitting and fixing Squatting plate with integral flushing in white vitreous chinaware of approved make in cement concrete (1:3:6) with jhama chips complete. (Payment of concrete will be paid separately)-450 mm X 350 mm.
1
881
881
Supply, fit & fix closet seat of approved make with lid and C.P. hinges rubber buffer and brass screw EPWC. Plastic (hollow type) white.
5
380
1900
Supply, fit & fix 32 mm dia polythene flush pipe of approved make with necessary fixing materials and clamps complete.
1
155
155
Labour for hoisting plastic water storage tank -upto 1500 litre capacity.
(a) Upto 1st story from G.L.
4
96
384
(b) Extra for each additional story
8
43
344
Labour for lowering plastic water storage tank and stacking in places as directed -upto 1500 litre capacity.
(a) From 1st floor to G.L.
4
58
232
(b) Extra for each additional story
8
29
232
Labour for punching hole in plastic water storage tank upto 50 mm dia.
12
19
228
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer1500 litre capacity
4
7840
31360
Supplying, fitting and fixing C.I. round grating. 100mm. dia.
10
62
620
Supply of UPVC pipes (B Type)& fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Meter Length 110 mm
40
292
11680
(B) Fittings.
(i) Plain Tee
110mm.
15
85
1275
(ii)Door Tee
110mm.
15
195
2925
(iii) Bend 450
110mm.
10
89
890
(iv)Bend 87.50
110mm.
30
120
3600
(v)Vent Cowl.
110mm.
10
33
330
(vi)Pipe Clip.
110mm.
30
21
630
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. Above G.L. 110 mm dia
40
57
2280
Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall
Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
5
1251
6255
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint
in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
For Exposed Work. PVC Pipes
15mm dia
10
101
1010
20 mm dia
10
129
1290
25 mm dia
20
177
3540
40 mm dia
20
292
5840
Supplying fitting and fixing pillar cock of approved make CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code
No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
5
1269
6345
Supplying & laying Double wall Corrugated (with external annular corrugation and smooth internal walls ) High Density Polytthelene Pipes conforming to I.S 16098 (Part-II ) 2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm and Impact Resistance TIR value not more than 10% including necessary jointing materials for non-pressure underground Drainage ,Sewarage & cross drainage application
150 mm dia. (Internal)
20
420
8400
Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.
(b) Upto 30 users:- (i) Within a lead of 150 metre
2
2112
4224
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety. (SAIL/TATA/RINL)
5
7253
36265
Part C : Electrical Works Supply & Fixing 240 V, 25A, Modular type starter with socket for 2T AC machine with 25 A Modular switch type DP MCB (C Curve) on GI Modular type switch board embedded in wall with top cover plate incl. S & F switch board and cover plate and making necy. connections with PVC Cu wire and Cu earth continuity wire etc.
14
1047
14658
Supply & Delivery of 2 Ton (24000 Btu/Hr) Cassette, Inverter type room air conditioner with panel having the following specification: a. Inverter AC b. Eco-friendly Refrigerant with Zero Ozone Depletion Potential. c. 4 way airflow. d. ISSER = 5. e. Remote Control with required no. batteries for each AC unit are to be provided,BIS certified.
14
85930
1203020
Providing & Fixing of suitable M.S. Hanging Stand for cassette airconditioned indoor units. It shall be made out appropriate size & thickness . The entire item has to be executed as per the OEM recommendation & site conditions. Highest Safety standard need to be provided for the Hanger. The M.S hanger with all accessories shall be capable of withstanding the Gross weight of the cassette indoor unit & Gross weight of Front Panel .All necessary supporting hanger, MS structure for supporting units, anchor fastners, nut , bolts etc. to be included in the scope.
31
6833
211823
Installation & Commissioning of 2 Ton Cassette Inverter type room air conditioner with outdoor support (S&F of M.S. Brackets for holding ODU) along with numbering as per direction of Engineer or his representative. Numbering should be permanent, engraved on a separate plate of suitable rigid material, and properly affixed in both Indoor & Outdoor units.
14
1435
20090
Charging of extra Refrigerant as per OEM recommendation for AC.
30
1467
44010
Supply and Fixing copper refrigerant pipes (This includes double run of both Liquid and Gas Line) of suitable dimension with suitable insulation for each AC. It shall be in a total clamping manner above the false ceiling & in a totally concealed manner below the false ceiling level. From the structural ceiling, it should be hung or shall be fixed on a wall/beam, etc. with clamps & the distance between two clamps shall be less than 1 meter. It shall not be placed over the false ceiling nor shall it be fixed with false ceiling members. Supply, fitting & testing of Closed Cell Class 1 Fire retardant elastomeric Nitrile Insulation Foam Tube with suitable Wall thickness for covering Copper Pipes with all fittings & accessories, etc. Lapping shall be applied to provide resistance against breakdown due to UV radiation for the exposed portion of the rubber insulation.
700
900
630000
Supply & fixing of flexible Water drainage pipe of suitable dimensions with suitable insulation.
300
54
16200
Supply & fixing 15 A plug top for AC Machines
14
80
1120
Supply & laying of suitable size & cores of copper PVC insulated cable between indoor and outdoor unit , as per OEM recommendation.
700
100
70000
Supply & fixing of 3/4-inch rigid PVC water pipe for drainage incl. nec. accessories as per site requirement.
200
40
8000
Supply & fixing of 1&1/4-inch rigid PVC water pipe for drainage incl. nec. Accessories as per site requirement.
600
70
42000
Cutting of channel on wall/floor surface for fixing of water drainage pipe and mending good damages to original finish after fixing of water drainage pipe of max. size 1.25 inch.
400
100
40000
Supplying & Fixing 240 V AC/DC superior type Multitune Call Bell with selector switch for single /Multi Tunes mode on HW board ncl. S&F HW board, include. Supply of batteries, if Battery operated.
6
294
1764
Supply & Fixing of Recess Mount 12 Watt Down Light with the following technical specifications:- CCT= 5700K, Housing Colour White, House material- Aluminium pressure die cast , LED life with L70 criteria-50000 Hrs, IP40(Housing), IP20(Driver), CRI ≥ 80, 2.5 KV surge protection, System Lumen ≥ 1200 Lm. , THD ≤ 10, Driver Efficiency ≥ 85%. The luminaire and Driver should be BIS certified.
180
963
173340
Supply & Fixing of Recess Mount 18 Watt Down Light with the following technical specifications:- CCT= 4000K, Housing Colour White, House material- Aluminium pressure die cast , LED life with L70 criteria-50000 Hrs,
IP40(Housing), IP20(Driver), CRI ≥ 80, 2.5 KV surge protection, System Lumen ≥ 1800 Lm. , THD ≤ 10, Driver Efficiency ≥ 85%. The luminaire and Driver should be BIS certified.
50
1183
59150
Supply and delivery at site of 12 inch. (300 mm) sweep Heavy Duty Exhaust Fan with aluminum die cast body (min 900 RPM).
6
2000
12000
Fixing of exhaust fan after making a hole in the wall and making good damages and smooth cement finish etc. as required and providing necy. Length of PVC insulated copper wire for making the connection for 12 inches (300 mm) sweep Heavy Duty Exhaust Fan
6
329
1974
Supply & Fixing 4 nos. 240 V, 6 A, 5 pin Modular type plug socket with 4nos. 6A switch (each set), without plug top on GI Modular type switch board embedded in wall with Module top cover plate incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Power Board/ Computer Board)
86
1691
145426
Supply & Fixing 240 V, 5/15 A, 5 pin Modular type plug socket with 16A Modular type switch, Modular switch type SP MCB (C-Curve) etc. complete set, without plug top on GI Modular type switch board embedded in wall with top cover plate incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
30
535
16050
Supply & Fixing 240 V, 6 A, 5 pin Modular type plug socket with 6A switch, without plug top on GI Modular type switch board embedded in wall with Module top cover plate incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
40
377
15080
Supplying & Fixing sheet metal inspection box (16 SWG) of min size 200 mm X 150 mm X 65 mm, flushed in wall by housing the same after cutting wall etc. incld. making earthing attachment painting and mending good damages to building works.
25
212
5300
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with
2*1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as
required.( including S & F of a modular switch, top cover, GI board,etc. including all accessories complete in all respect) ( This does not include the looped circuit in RM)
60
1094
65640
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sq. mm) single core stranded ‘FRLS’ PVC insulated & unsheathed copper wire with
1x22/0.3 (1.5 sq. mm) single core stranded ‘FRLS’ PVC insulated & unsheathed copper wire for ECC, in suitable size of PVC rigid conduit pipe complete with all accessories embedded in wall/ceiling/floor incl. necessary fittings including S&F ceiling rose, Holder, etc., as required, and to light, fan points,2way Modular switch(Staircase, Bed Room, etc.) (incl. S & F) & Calling bell with Modular type switch fixed on Modular GI switchboard providing a neutral link in S.B. with top cover plate flushed in wall incl. mending good damages to original
finish (S & F of a modular switch, top cover, GI board, etc. including all accessories complete in all respect).(Average run 8mtr.)
112
1093
122416
Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.
blades, 2 nos. canopies, shackle kit, safety rope, copper winding, and Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374- 2019), THD less than 10%, S&F electronic regulator unit for speed control or Speed Control through remote control and all remaining accessories including safety pin, nut bolts, washers, insulation resistance of more than 2 mega ohms, suitable for 230 V, 50 Hz, single-phase AC Supply, earthing etc. complete as required.
60
3999
239940
Installation, Testing & Commissioning of ceiling fan complete with blade, regulator, canopy, etc. with S & F of the appropriate length of MS down rod & making a necessary connection by cu wire.
60
66
3960
Supply and fixing of 400 mm wall mounted BLDC wall fan with remote and automatic speed control . Armature coil should be super enamelled coper wire, less than 40 watt, Air Flow Capacity: more than 70 Cubic Metres per Minute, RPM more than 1450.
32
3203
102496
Distribution wiring in single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall mending good damages to original finish. [2 x (2.5 Sq.mm) + 1 x (1.5 Sq.mm) as ECC]
1400
275
385000
Distribution wiring in single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall mending good damages to the original finish. [2 x (4 Sq.mm) + 1 x (4 Sq.mm) as ECC]
400
334
133600
Distribution wiring in single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall mending good damages to the original finish. [2 x (10 Sq.mm) + 1 x (6 Sq.mm) as ECC]
500
570
285000
Distribution wiring in single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall mending good damages to original finish. [2 x (1.5 Sq.mm) + 1 x (1.5 Sq.mm) as ECC]
500
233
116500
Supplying and Fixing double door SPN MCB Distribution Board [Enclosure 8 way] with IP42/43 protection along with 63A, DP 240V, 10KA,C-type MCB as Incomer and 6 nos. 20 amp, 240 volts, SP 10KA, C-type MCB as outgoing. Concealed in the wall after cutting the wall & mending well the damages to original finish incl. interconnection with suitable size of copper wire, extended terminals/spreader link sets, and neutral link & provision for earthing attachment. (2 Ton AC DB)
4
3467
13868
Supplying and Fixing double door SPN MCB Distribution Board [Enclosure 18 way] with IP42/43 protection along with 40A, DP 240V, 10KA,C-type MCB as Incomer and 16 nos. 6-32 amp, 240 volts, SP 10KA, C-type MCB as outgoing. Concealed in the wall after cutting the wall & mending well the damages to original finish incl. interconnection with suitable size of copper wire, extended terminals/spreader link sets, and neutral link & provision for earthing attachment. (Power DB)
12
6190
74280
Supplying and fixing double door SPN MCB Distribution Board [Enclosure 12 way] with IP42/43 protection along with 32A, DP 240V, 10KA, C-type MCB as Incomer and 10 nos. 6–32-amp, 240-volt, SP 10KA, C-type MCB as outgoing. Concealed in wall after cutting the wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire, extended terminals/spreader link sets and neutral link & provision for earthing attachment. (Lighting DB)
3
4168
12504
Supply and Fixing of double door Vertical TPN MCCB Main Distribution Board (4 way) with IP-42/43 protection along with 100A, TP 415V, 25kA adjustable thermal and Fixed magnetic setting MCCB as Incomer and 10 nos. 40A-63A, SP, 10KA, C-type MCB & 2 nos. 32 A SP, 10KA, C-type MCB as outgoing, on angle iron frame on wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire , extended terminals /spreader link sets and neutral link & provision for earthing attachment. (Each per Floor)
3
20835
62505
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust and moisture proof entry of XLPE cable - 3.5 core 95 sq.mm. cable
2
274
548
Finishing of XLPE cable ends by crimping method incl. supplying and fixing solder less sockets (Dowels make),tapes, anticorrosive paste and jointing material-3.5 core 95 sq.mm. cable
2
310
620
Supply and delivery of 1.1 KV grade 3.5 core 70 sq.mm. XLPE insulated armoured Aluminium cable comply to IS:7908(Part-1)/1988 or latest amendment if any.
30
627
18810
Laying of cable 3.5 core 70 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip)Wire, making holes etc. as necy.mending good damages and painting
30
83
2490
Supplying and fixing compression type gland complete wih brass gland, brass ring & rubber ring for dust and moisture proof entry of XLPE cable - 3.5 core 70 sq.mm. aluminium cable
8
212
1696
Finishing of XLPE cable ends by crimping method incl. supplying and fixing solderless sockets (Dowels make),tapes, anticorrosive paste and jointing material for 3.5 core 70 sq.mm. cable.
8
263
2104
Supply of 32 bit microprocessor based 100% Hot Redundant Intelligent Addressable Fire Alarm Control panel with 2 loops & battery back up. The panel shall be networkable & expandable upto 06 loops w/o changing the cabinet. The control panel, batteries, battery charger etc, shall be Vds approved and as per EN-54 standard. The panel would be modular, decentralized, with 100% hot redundancy in cpu/master control unit, 100% hot redundancy in loop cards, relay and interface card by means of duplicated electronics, means, hardware redundancy with full functionality.The panel shall be consisting with minimum 240 character LCD display and TCP/IP for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have atleast 250 addressable detectors and addressable devices with up to 3.5km loop length
1
365000
365000
Installation, testing & commissioning of above panel in all respect as required at site.
1
39750
39750
Supply of Addressable type multi criteria(Smoke cum Heat) detector with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type with built-in integrated short circuit isolator as per technical specifications.
100
4134
413400
Installation, testing & commissioning of above multi criteriadetector in all respect as required at site.
100
477
47700
Supply of Addressable manual call point having inbuilt short circuit isolator
12
7193
86316
Installation, testing & commissioning of above Addressable manual call point in all respect as required at site.
12
477
5724
Supply of Addressable Loop Powered multi tone sounder with integrated short circuit isolator & having operating temperature - 10⁰C to + 55⁰C
10
9309
93090
Installation, testing & commissioning of above Loop Powered multi tone sounder in all respect as required at site.
10
477
4770
Supply of Response indicator as per technical specifications
30
117
3510
Installation, testing & commissioning of above response Indicators
30
69
2070
Supply of I/O module as per technical specifications
3
13125
39375
Installation, testing & commissioning of above modules
3
2500
7500
Supply of Metal Junction Box for mounting of detectors / devices etc
25
102
2550
Installation of above Metal Junction Box in all respect as required at site.
25
53
1325
Supply of 2 C x1.5 sq.mm.fire alarm armoured cable, 1.1 KV rated with annealed copper conductor having XLPE insulation , armourned & FRLS outer sheath complete as required.
800
112
89600
Concealed laying of above 2 C x1.5 sq.mm.fire alarm armoured cable, 1.1 KV rated with annealed copper conductor having XLPE insulation , armourned & FRLS outer sheath complete as required. The cable should be laid in a fully concealed manner below the false ceiling and layed on surface above the false ceiling.
800
45
36000
Supply ,Installation and Commissioning of 6 Watt Ceiling Loudspeaker with 100V matching Transformer with tappings in primary winding. The Ceiling load speaker should be compatible with the amplifier.It should have integral spring clamps on the rear which can be used to easily fix the loudspeaker into the false ceiling.
18
846
15228
Supply, Installation and Commissioning of above True Ceiling Loudspeaker with 100V matching Transformer with tappings in primary winding. The Ceiling load speaker should be compatible with the amplifier with backbox for mounting in bare ceiling.
3
846
2538
Supply, Installation & Commissioning of 240W Mixer Amplifier with USB and Bluetooth,4 microphone/line inputs, plus music source input,100 V and 4-ohm loudspeaker outputs.
1
25803
25803
Supply, Installation, Testing , and Commissioning TABLE-TOP MICROPHONE Table top unidirectional condenser microphone on a flexible stem.Phantom powered by amplifier. This includes all accessories like suitable microphone cable. Sensitivity-(2 mV/Pa),Frequency response 100 Hz to 16 kHz.
1
9468
9468
Supply of Ceiling / pendent type double sided LED exit signage light with battery backup
8
3263
26104
Installation, testing & commissioning of above LED exit signage light
8
163
1304
Supply and Fixing of Cable End Box for VTPN DB from the same OEM as the VTPN DB OEM.
5
712
3560
Supply & Delivery of Speaker Cable, 2C X 1.5 Sq.mm, Twin Parallel Speaker Cable, Oxygen-free Copper as per Class 5 or 6 of IS: 8130/84, latest, Insulation PVC, generally as per IS 8130/84, IS 694, /IS 5831, etc. with latest up to date amendments.
300
61
18300
Laying, Termination & commissioning of the above Speaker Cable with suitable connectors.
1
3050
3050
Earthing with 50mm. Dia. GI pipe ISI Medium 3.64 mm thick, 3.04 Mtrs. Long and 1x4 SWG GI earth wire (4mtrs long), 13 mm. dia x 80 mm. long GI nuts and bolts, double washer, incl. S&F 65 mm. dia GI pipe protection (1mtr. Long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mtrs below the ground level including providing necessary masonry enclosure of overall size 86.36 cm x 86.36 cm x 46 cm deep (below the ground level), CI hinged inspection cover of size 36.56 cm x 36.56 cm and treating of soil by using salt and charcoal as required. Earthing work is to be carried out as per IS.
6
3030
18180
Connecting from earth pit to earth pit, earth station to earth bus bar, cable tray inclusive of S&F 25mm x 6 mm Galvanized (Hot-Dip) MS flat under the ground level/on wall/floor with GI saddle as required inclusive drilling holes, bolts, nuts, washers, etc. and mending good the damages as required.
400
138
55200
Supplying & Fixing earth bus bar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
4
216
864
Connecting the equipment to the earth bus bar including S & F GI (Hot-Dip) wire of size as below on the wall/floor with staples buried inside the wall/floor as required and making connections to equipment with bolts, nuts, washers, cable lugs, etc. as required, and mending good damages. Solid GI wire: No. 6 SWG
20
13
260
Dismantling of all existing Light fittings, Fans, Cables, DBs, wires, switch board, switches, gadgets, etc. including AC machines and handing it over to NSD Electrical Section/MM Scrap Yard/8 no. work shop area.
1
21580
21580
Supply and delivery of 3C x 4 sq. mm, 1.1KV Grade, PVC insulated armoured flexible copper conductor cable complies with IS 694- 1990 or latest amendment if any.
100
210
21000
Laying of cable 3 core 4 sq. mm on wall/surface/Tray incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot-Dip) Wire, making holes, etc. as necy. mending good damages and painting
100
60
6000
Finishing of the PVC insulated cable ends by socketing with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes for cable termination.
15
68
1020
Supply and installation of Time Switch Controller Set for max 32A load with Contactor and MCB. Used For Automatic Switching On/Off of lights. Package Includes One Timer, 32A Contactor, and 32A- 2 Poles MCB, Terminal Block, pre-wired and all fitted into SS enclosure
1
4764
4764
Supply and Fixing of waterproof Loop in Loop out/Junction box/Enclosure for individual luminaire.
8
241
1928
Supply of 20 W LED Batten luminaire for indoor application including LED lamps, constant current Driver with internal surge protection , electronic components in pre wired condition with all accessories . Lumen output of the fittings is 2000 lumens CCT of 6500 deg k ( +/- 500 Deg K ) Luminaire is suitable to operate on wide input voltage range with input power supply of 220-240V, 1 phase, 50Hz AC . Lifetime of the fixture should be at least 25,000 burning hours at L70.Luminaire is IP 20 protected. Luminaire & Driver units are BIS approved.
40
380
15200
Fixing of above LED Battern luminaries on surface of wall/ ceilling, including all accessories complete in all respect.
40
100
4000
Supply, Installation, and Commissioning of 60W Street Light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass with IP66 protection and impact resistance of IK07 with
the following technical specifications:- Average life L70B50: 50000 hours, High performance potted electronic driver, High efficiency long life LED module with SMD LED package mounted on MCPCB Lumen efficacy of LED 140 lm/W,CCT-6500 K, CRI≥70, System Lumens (lm) ≥ 7200 Lm, THD≤10%, Powered by built-in potted LED driver (SMPS based
constant current supply) with lower THD, Output Open /Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 10 kV & other safety test as per IS 15885 Part-2/Sec 13.Luminaire and Driver should be BIS certified.
8
5182
41456
Supply and installation of Hot Dip galvanized iron cable tray of size 450 mm width× 50 mm depth× 2.0 mm thickness (Galvanization thickness not less than 50 microns) with perforation, not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including GI bolts & nuts, etc.
180
1325
238500
Supply and installation of Hot Dip galvanized iron cable tray "bends" of size 450 mm width× 50 mm depth× 2.0 mm thickness (Galvanization thickness not less than 50 microns) with perforation, not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including GI bolts & nuts, etc. as required.
12
2683
32196
Providing & fixing pre-fabricated M.S. Stand for outdoor units. It shall be made from heavy gauge M.S channels, angles, flats, etc. of appropriate size & thickness duly painted with anti-corrosive paint for outdoor placement for outdoor unit of 4 Ton Cassette AC. The entire item must be executed as per the recommendation of the OEM & site conditions. (As approved by EIC)
17
9333
158661
Supply and delivery of 4C x 4 sq. mm, 1.1KV Grade, PVC insulated unarmored flexible copper conductor cable complies with IS 694-1990 or latest amendment if any. (Power supply cable to AC outdoor unit via starter)
600
286
171600
Laying of cable 4 core 4 sq.mm at an average depth of 75 mm with earthing attachment in 10 SWG GI (Hot Dip) Wire, after cutting floor/pavement/wall and making holes incl., embedding the cable, and mending good the damages to original finish incl. removing the rubbish
150
127
19050
Laying of cable 4 core 4 sq. mm on wall/surface/Tray incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot-Dip) Wire, making holes, etc. as necy. mending good damages and painting.
550
60
33000
Supply & Delivery of 4 TR (High Efficiency) Cassette, Inverter type room air conditioner with panel having the following specification: a. Inverter AC b. Eco-friendly Refrigerant with Zero Ozone Depletion Potential. c. 4 way airflow. d. ISSER = 4. e. Remote Control with required no. batteries for each AC unit are to be provided.
17
109559
1862503
Supply & Fixing suitable AC starter for above 4 Ton AC machine embedded in wall making necy. connections with PVC Cu wire and Cu earth continuity wire etc. The rating of the starter will be as per AC OEM recommendation as mentioned in their AC data sheet.
17
1047
17799
Supply and Fixing of double door Vertical TPN MCCB Main Distribution Board (Outgoing Module12+12+12) with IP-42/43 protection along with 200A, TP 415V, 25/30kA adjustable thermal and fixed magnetic setting MCCB as Incomer and 9 nos. 32 Amp, TP, 10KA, C-type MCB as outgoing, on the wall on angle iron frame and mending well the damages to the original finish incl. interconnection with suitable size of copper wire, extended terminals/spreader link sets, and neutral link & provision for earthing attachment. (For 4 Ton AC load )
2
27196
54392
Installation & Commissioning of above 4 Ton Cassette Inverter type room air conditioner with outdoor support for holding ODU along with numbering as per direction of Engineer or his representative. Numbering should be permanent, engraved on a separate plate of suitable rigid material, and properly affixed in both Indoor & Outdoor units.
17
1435
24395
Supply & Fixing of Pre-Galvanized Raceway of thickness 1.6 mm consisting of body & cover under floor tile/marble, after chipping of floor as per requirement including Supply & Laying GI wire through raceway for laying of cable and/or wire with PVC Rigid conduit from DB to end electrical points, along with earthing of each unit with PVC FRLS copper wire (incld. S & F). One set of 100mm (W) x 25mm (W) x 2.44 meter (L)Min Dimension) x 1 compartment with coupler for joining raceways, fixing brackets, leveling accessories and other accessories complete in all respect and other accessories complete in all respect.
16
2363
37808
Supply and fixing of 300 mm x 300 mm x 50-70 mm Pre-galvanized hight adjustable junction box (50-70mm) of thickness 1.6mm with base, lid, flyover, site cover etc. on floor, after chipping of floor as per requirement, so that top matches with true floor level. Site cover to be removed after Civil flooring work.
14
2587
36218
Supply and fixing of Pre-galvanized vertical rise of thickness 1.6mm flushed in wall after cutting of wall, complete in all respect, for cable/wire entry from concealed position in wall to the floor raceway. (size matching the raceway)
8
1550
12400
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%