Kolkata Municipal Corporation Tender

REASSEMBLING THE GEARBOX VIZ WORM GEAR, SECTOR PINION, SPUR GEAR ATTACHMENTS ,KEY, BEARINGS USING PULLER AND OTHER NECESSARY ARRANGEMENT WITHOUT DAMAGING ANY COMPONENTS,CLEANING AND GREASING ETC COMPLETE AS PER DIRECTION OF EIC

FITTING FIXING THE GEARBOX WITH THE EXISTING VALVE SHAFT MAINTAINING PROPER ALIGMENT AND ADJUSTMENT OF THE SECTOR PINION, FITTING OF KEY, TIGHTENING THE MOUNTING BOLTS , ADJUSTMENT AND FIXING STOPPER BOLT ETC AND ENSURE FULL OPEN /CLOSE AT 90 DEGREE ROTATION

SUPPLY AND FIXING OF GOOD QUALITY GASKET AFTER PROPER CLEANING THE SURFACE AS PER DIRECTION OF EIC

SUPPLY AND DELIVERY WITH FITTING OF NEW WORM GEAR WITH NEW WORM SHAFT

SUPPLY AND DELIVERY, FITTING OF NEW SPUR GEAR

SUPPLY AND DELIVER, FITTING OF NEW SECTOR PINION

SUPPLY AND DELIVERY WITH FITTING OF NEW FASTNER

SUPPLY ,DELIVERY AND FITTING FIXING OF GOOD QUALITY "O" RING AND OIL SEAL

SUPPLY AND DELIVERY OF NEW MOUNTING STUD NUT & COVER NUT

CLEANING ,GREASING AND PAINTING OF GEARBOX

SUPPLY AND DELIVERY OF UNIVERSAL JOINT OF SHAFT DIA 25 MM TO 35 MM

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. I) For structural members of specified sections weighing less than 22.5 Kg./m

PLUMMER BLOCK (C.I)

SUPPLY OF BEARING NO-51211 (SKF MAKE - THRUST BEARING)

Sub Total

CGST 9%

SGST 9%

CESS 1%