Kolkata Municipal Corporation Tender

BUILDING WORKS ( C ) BRICKWORKS,CONCRETE WORKS ETC A. BRICK WORKS 7. BRICK WORK WITH 1ST CLASS BRICKS IN CEMENT MORTAR (1:4) (A) IN FOUNDATION AND PLINTH.

BUILDING WORKS ( C ) BRICKWORKS,CONCRETE WORKS ETC A. BRICK WORKS 16. 125 MM. THICK BRICK WORK WITH 1ST CLASS BRICKS IN CEMENT MORTAR (1:4) IN GROUND FLOOR.

SECTION 1. ------------BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.PLASTER (TO WALL, FLOOR, CEILING ETC.) WITH SAND AND CEMENT MORTAR INCLUDING ROUNDING OFF OR CHAMFERING CORNERS AS DIRECTED AND RAKING OUT JOINTS INCLUDING THROATING, NOSING AND DRIP COURSE, SCAFFOLDING/STAGING WHERE NECESSARY (GROUND FLOOR).[EXCLUDING COST OF CHIPPING OVER CONCRETE SURFACE](II) WITH 1:4 CEMENT MORTAR (A) 20 MM THICK PLASTER.

BUILDING WORKS (D) FLOORING A. ORIGINAL WORKS 35. SUPPLYING, FITTING & FIXING 1ST QUALITY CERAMIC TILES IN WALLS AND FLOORS TO MATCH WITH THE EXISTING WORK & 4 NOS. OF KEY STONES (10MM) FIXED WITH ARALDITE AT THE BACK OF EACH TILE & FINISHING THE JOINTS WITH WHITE CEMENT MIXED WITH COLOURING OXIDE IF REQUIRED TO MATCH THE COLOUR OF TILES INCLUDING ROUGHENING OF CONCRETE SURFACE, IF NECESSARY OR BY SYNTHETIC ADHESIVE & GROUT MATERIALS ETC. (B) WALL. WITH SAND CEMENT MORTAR (1:3) 15 MM THICK & 2 MM THICK CEMENT SLURRY AT BACK SIDE OF TILES USING CEMENT @ 2.91 KG/SQ.M & JOINT FILLING USING WHITE CEMENT SLURRY @ 0.20KG/SQ.M. (A) AREA OF EACH TILE UPTO 0.09 SQ.M (I) COLOURED DECORATIVE. NOTE: 2. ADD EXTRA FOR EACH ADDL, FLOOR OVER THE RATE FOR ITEM 35 & 36 OF SUBHEAD A. (I) UPTO 4 TH FLOOR-RS 5/ SQ.M (I) ABOVE 4 TH FLOOR-RS 6.25/ SQ.M.

SECTION(B) - SANITARY AND DRAINAGE WORKS.(B)-(II) SOIL PIPE AND FITTINGS.(A) ORIGINAL WORKS.(14)SUPPLYING,FITTING AND FIXING CAST IRON 'P' OR 'S' TRAP CONFORMIMG TO I.S. 3989/ 2009 AND 1729/ 2002 INCLUDING LEAD CAULKED JOINTS AND PAINTING TWO COATS TO THE EXPOSED SURFACE. (PAINTING TO BE PAID SEPERATELY).(A) 'P' TRAP.(III) 100 MM.

SECTION 1. ------------BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 15 APPLYING DECORATIVE CEMENT BASED PAINT OF APPROVED QUALITY AFTER PREPARING THE SURFACE INCLUDING SCRAPING THE SAME THOROUGHLY (PLASTERED OR CONCRETE SURFACE) AS PER MANUFACTURER'S SPECIFICATION. IN GROUND FLOOR: III) TWO COATS.

SECTION 1. ------------BUILDING WORKS (K) PAINTING, VERNISHING ETC A. ORIGINAL WORKS 1 (B) PRIMING ONE COAT ON TIMBER OR PLASTERED SURFACE WITH SYNTHETIC OIL BOUND PRIMER OF APPROVED QUALITY INCLUDING SMOOTHENING SURFACES BY SAND PAPERING ETC. (THIS ITEM IS APPLICABLE TO NEW WORK OR OLD WORK WHEN THE ORIGINAL SURFACE HAS BEEN EXPOSED BY REMOVAL OF OLD PAINT.)

SECTION 1. ------------BUILDING WORKS (K) PAINTING, VERNISHING ETC A. ORIGINAL WORKS 2 (A) PAINTING WITH BEST QUALITY SYNTHETIC ENAMEL PAINT OF APPROVED MAKE AND BRAND INCLUDING SMOOTHENING SURFACE BY SAND PAPERING ETC. INCLUDING USING OF APPROVED PUTTY ETC. ON THE SURFACE, IF NECESSARY :(A) ON TIMBER OR PLASTERED SURFACE :WITH SUPER GLOSS (HI-GLOSS) -(IV) TWO COATS (WITH ANY SHADE EXCEPT WHITE).

BUILDING WORKS (G) WOOD AND PVC WORKS A. DOOR WINDOW FRAME 8. SUPPLYING FITTING AND FIXING IN POSITION APPROVED P.V.C. DOOR FRAME (MATT FINISH) MADE OF EXTRUDED P.V.C. MULTICHAMBER HOLLOW SECTION HAVING DIMENSIONS 60MM X50MM X 2MM (+/-0.2MM), HORIZONTAL SECTION WILL BE JOINED WITH VERTICAL SECTION BY GALVANISED STEEL SCREWS AFTER INSERTING TWO NUMBER STEEL BRACKETS AS REINFORCEMENT MAKING SUITABLE SPACE FOR PLACING HINGES, ONE STEEL TUBE 40MM X20MM X 1.20 MM WILL BE INSERTED ON ONE FULL VERTICAL SIDE OF THE FRAME (HINGE SIDE) AS REINFORCEMENT, THE FRAME WILL THEN BE FIXED IN THE OPENING WITH THE HELP OF P.V.C. EXPANDABLE FASTNER/WOODEN GUTTIES AND GALVANISED STEEL SCREWS INCLUDING COST OF ALL MATERIALS AND LABOUR, HIRE CHARGES OF TOOLS AND APPLIANCES, CARRIAGE OF ALL MATERIALS, TAXES AND ALL OTHER INCIDENTAL CHARGES COMPLETE.

BUILDING WORKS (G) WOOD AND PVC WORKS B. DOOR WINDOW SHUTTER 27. PVC DOOR SHUTTER-30 MM THICK: SUPPLYING FITTING AND FIXING P.V.C. DOOR SHUTTER OF APPROVED QUALITY & SHADE IN POSITION, THE STYLE & RAIL OF THE P.V.C. DOOR SHUTTER WILL BE MADE OF RIGID P.V.C. MULTICAVITY HOLLOW CHAMBER OF 59 MM X30 MM SECTION WITH 2.0 MM (+/-0.2 MM) WALL THICKNESS.HORIZONTAL & VERTICAL SECTION SHALL BE FIXED TO EACH OTHER BY SELF TAPPING SCREWS AND 1 SOLID POLYMERIC OR M.S. GALVANISED TUBULAR 'L' SHAPED BRACKET 100MM X 200MM IN EACH CORNER OF THE SHUTTER FRAME FOR PLACING HINGES. POLYMER BASED MULTICAVITY HOLLOW SECTION OF 120 MM X30MM WITH 2.0 MM (+/- 0.2 MM) WALL THICKNESS WILL BE FITTED IN THE MIDDLE, REINFORCED BY SOLID POLYMER BAR OF 200 MM LONG AT BOTH ENDS AND SCREWS FROM BOTH SIDES AS LOCK RAIL. THE SECTION FRAME WILL THEN BE FITTED IN BY PVC PANELS OF SIZE 100 MMX25 MM WITH WALL THICKNESS OF 1.2 MM (+/- 0.2 MM) AND 2 NOS. OF 6 MM DIA BRIGHT ROD WILL BE INSERTED HORIZONTALLY WITH BOTH SIDE CHECK

SUPPLYING, FITTING AND FIXING SHALLOW WATER CLOSET INDIAN PATTERN I.P.W.C.)OF APPROVED MAKE IN WHITE VITREOUS CHINAWARE IN POSITION (EXCLUDING COST OF CONCRETE FOR FIXING). (III) 450MM LONG.

SECTION(B) - SANITARY AND DRAINAGE WORKS.(B)-(II) SOIL PIPE AND FITTINGS.(A) ORIGINAL WORKS.(16.)SUPPLYING, FITTING AND FIXING WITH CEMENT JOINTING (3:1) SALT GLAZED STONEWARE PIPE INCLUDING EXCAVATION OF EARTH UPTO 1.50 METRE DEPTH IN ALL SORTS OF SOIL BOTH MIXED OR UNMIXED AND REFILLING (BUT EXCLUDING CONCRETING AT BOTTOM AND SIDES).(IV) 100 MM.

SECTION(B) - SANITARY AND DRAINAGE WORKS.(B)-(II) SOIL PIPE AND FITTINGS.(A) ORIGINAL WORKS.(16.)SUPPLYING, FITTING AND FIXING WITH CEMENT JOINTING (3:1) SALT GLAZED STONEWARE PIPE INCLUDING EXCAVATION OF EARTH UPTO 1.50 METRE DEPTH IN ALL SORTS OF SOIL BOTH MIXED OR UNMIXED AND REFILLING (BUT EXCLUDING CONCRETING AT BOTTOM AND SIDES).(III) 150 MM

Sub Total

GST 18%

CESS 1%