Kolkata Metropolitan Development Authority Tender

Page – [1] Signature of Signature of Tender Signature of Tender Tenderer Inviting Authority Accepting Authority Price Schedule for the Work : Supplying and laying 1400 mm dia M.S pipe conduit to be prepared from 14 mm thick M.S plate by Pipe Jacking Technique including supplying and laying of 1000 mm dia (ID) M.S Raw water rising main including temporary and permanent road restoration and ancillary work including shifting of existing utilities within the conduit to be prepared from 12 mm thick M.S plate accross and underneath the Jashore Road, BT Road, Sealdah main Railway Line, Sealdah Bangao Railway line and Dumdum road at 5 Nos location. NIT No : 01/SE(EC)/WS/KMDA of 2019-2020 Dated 04/06/2019 Sl- 7 Sl. No. Item Description Quantity Units Rate Per Unit Amount in Rs 1 Preperation of Drawing & Design for Driving Pit and Reception Pit for Jack Push under Railway track at desired depth and other necessary paper correspondence as per requirement of the concerned Authority and getting the approval of the same by the competent authority for the proposed Jack Push work in cluding all cost of materials but excluding the charges for jack pushing raised by railway authority. 6.00 Each 70000.00 420000.00 2 Construction of one on "Driving pit" (size 5m x 3m ) and thrust wall at derired depth for jack pushing as per approved drawing of the concerned authority including excavation of earthwork and filling, reinforcement, Concreting (M 25), Ply Board / Steel shuttering, 15 mm plastering, neat cement, providing manholes on top slab and inside ladder by MS etc. as per specificationand direction of Engineer in Charge and all complete in all respect and including all cost of materials.( manhole cover 35 M.T ) 6.00 No 1854331.42 11125988.54 3 Construction of one on "Reception pit" (size 4m x 2.5m ) at desired depth for jack pushing as per approved drawing of the concerned authority including excavation of earthwork and filling, reinforcement, Concreting (M 25), Ply Board / Steel shuttering, 15 mm plastering, neat cement, providing manholes on top slab and inside ladder by MS etc. as per specificationand direction of Engineer in Charge and all complete in all respect and including all cost of materials.( manhole cover 35 M.T ) 6.00 No 1224122.34 7344734.02 4 Supplying and Laying 14 mm thick M.S. pipe at site of 1400mm internal dia M.S. pipe conduit as a casing and providing the same under Railway Track by Jack Pushing Technique at desired depth as per direction of the EIC. And complete in all respect.[Cost to include of all required item to execute the said works as per drawing specification and direction of the EIC including Page – [2] Signature of Signature of Tender Signature of Tender Tenderer Inviting Authority Accepting Authority Sl. No. Item Description Quantity Units Rate Per Unit Amount in Rs fabrication all materials, labour, hire charges for tools and plants all complete etc.] by jack pushing method. 4.1 For 1400 mm dia 476.00 Mtr 64051.25 30488395.00 5 Derusting brushing & cleaning the internal surface of the M.S. pipes and specials with sand blasting and applying one coat of approved primer over it and providing 3 coats of anticorrosive and not toxic paint (two coats in the factory over primer and the third coat at site after laying to all pipes & specials inside as per inside as per I.S. specification & direction of the Engineer -in-Charge. Thickness of one coat of paint to be such as to maintain the surface coverage of 12 to 13 M, per liters of paints. A length of 150 mm at each and of pipes and specials will be provide with a coat of primer and three coats of painting at sites including all cost of materials. 4050.70 Sqm 371.00 1502809.88 6 Coating of ‘Epoxy’ Resin with araldite GY 257and hardener HY 840/850 as recommended proportion for use on concrete, metal and wood surface to prot