Kolkata Metropolitan Development Authority Tender

Supplying and placement of Godrej Make Optimizer from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard and IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Dimensions of SS1 - Single Static 1 Bay Push Pull Type (U/C + Fittings) shall be 2047H x 1200W x 400D mm. Overall Dimensions of SL1 - Single Last 1 Bay Push Pull Type (U/C + Fittings + Handle) shall be 2047H x 1200W x 400D mm. Overall Dimensions of TM1 - Twin Mobile 1 Bay Push Pull Type(U/C + Fittings + Handle) shall be 2047H x 1200W x 800D mm.The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns . The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side . Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 5 for SS1 Overall Dimensions of Channel 9'0'' shall be 9 feet (L) . Guide channels shall consist of 'J' section 2 mm thick & 25 mm square bright bar - both connected by screws . Prior to the embedding of the guide channels with the help of raul plug & screw , the ground has to be in proper leveled condition .

Supplying and placement of Godrej Make VIP Make Up Room-1 Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard and IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Interio VIP Make Up Room-1 Table has electrical trunking ,Storage and Leg Space. The module Should have C‐FRAME SYSTEM assemblies from hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994.Cframe should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C‐frame legs should be supplied with adjustable feet (tolerance from ‐5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus.The C‐Frames should be for cabinets that can slide through‐and‐through from one end of the workbench to the other through C‐Frames.HORIZONTAL MEMBERSThese should be made from rectangular pipes of 2mm thickness. Cross‐sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C‐Frames together as shown using Cclamps/ U‐clamps. Together with the C‐Frames and Horizontal Members connected together, the skeletal structure of the work‐bench is formed on which the worktop can be placed and the hanging‐type storage cabinets can be suspended.Removable Back Panels These cover panels cover the service lines that run behind them. These should be easily removable (unclipped) and the service line be accessed for maintenance. They should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness.ELECTRICAL TRUNKING housing electrical switches and sockets, data and voice points, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. It should be available in both, single sided and double sided configurations. It should be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. WORKTOP It should be 19mm (+/‐ 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V‐groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6mm thickness.

Supplying and placement of Godrej Make Cue 3 Seater Sofa from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard and IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. PANELS: Understructure is made up of combination of 25mm & 18 mm thk MDF block. The Bare MDF structure is covered with 5mm M.D.F sheet to provide a backing surface for foam padding. POUF: Understructure is made up of Plywood 12+1mm thk.[as per IS:303 with moisture resistance & termite proofing].The structure is covered with 3mm M.D.F sheet to provide a backing surface for foam padding. FOAM:- The panel has 6mm PU foam of 60kg/m3 density on outer surfaces to give a soft touch and feel. POUF: The top structure of pouf ie: seating surfaces has slab foam of 32kg/m3 on the top for soft feel while the sides of top structure is covered with PU foam of 28 kg/m3 density all around. The bottom structure has 6mm PU foam of 60kg/m3 density on all four vertical sides to give a soft touch and feel.

Supplying and placement of Godrej Make Prop Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. 51.40(W)*66.20(H).Top Worksurface-The Top is made from 5 + 0.3 mm thk Aluminium Sheet which is powder coated with DFT 50 microns (+10). Understructure-Centre Support-Made of Aluminum extrusion 2 mm average thickness, powder coated with DFT 50 microns (±10). Base plate-Made from 5.0 ±0.3mm thk HR Steel plate which is powder coated with DFT 50 microns (+ 10) .

Supplying and placement of Godrej Make VIP Make Up Room-2 Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Interio VIP Make Up Room-2 Table has electrical trunking ,Storage and Leg Space. The module Should have C‐FRAME SYSTEM assemblies from hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994.Cframe should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C‐frame legs should be supplied with adjustable feet (tolerance from ‐5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus.The C‐Frames should be for cabinets that can slide through‐and‐through from one end of the workbench to the other through C‐Frames.HORIZONTAL MEMBERSThese should be made from rectangular pipes of 2mm thickness. Cross‐sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C‐Frames together as shown using Cclamps/ U‐clamps. Together with the C‐Frames and Horizontal Members connected together, the skeletal structure of the work‐bench is formed on which the worktop can be placed and the hanging‐type storage cabinets can be suspended.Removable Back Panels These cover panels cover the service lines that run behind them. These should be easily removable (unclipped) and the service line be accessed for maintenance. They should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness.ELECTRICAL TRUNKING housing electrical switches and sockets, data and voice points, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. It should be available in both, single sided and double sided configurations. It should be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. WORKTOP It should be 19mm (+/‐ 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V‐groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6mm thickness.

Supplying and placement of Godrej Make Topaz Table 1650W x 750D x 750H mm from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Dimension: 1650x750x750. Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Understructure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal. Panel Drawer Slides. Drawer extension is 325 mm. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security

Supplying and placement of Godrej Make Wish Standalone Partition from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Wish Standalone partition is a modular system with thickness of 75mm and variety of functional and decorative finishes. Main Frame Structure: Wish Standalone Partition has main structure of combination of different Aluminum Sections made from Aluminum alloy 63400-WP and are powder coated with Epoxy Polyester or Anodized. The 52.4mm panel comprises of - 1) 2 nos. of vertical extrusions made of aluminum. 2) Horizontal extrusions made of aluminum at every division of tile/block. The numbers of these horizontal extrusions vary as per panel height. 3) Intermediate blocks made out of a composite construction of MDF and paper honeycomb. Numbers of these blocks vary as per panel height. 4) Fabricated bottom frame as a welded structure of steel components. 5) 2 nos. of bottom tiles. 6) Cover extrusions made of aluminum to cover the glass screen fixing details on panels. 7) These panels are supported on legs at bottom with levelers at various locations depending on the layout requirements.

Supplying and placement of Godrej Make Ace Full Back Chair with Headrest from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum. armrests : the armrest should be having two adjustment, height (6.0±0.5cm) and depth (6.0±0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner. active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: • 360° revolving type• front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• tilt tension adjustment can be operated in seating position• 5 position tilt limiter giving option of variable tilt angle to the chair• seat / back tilting ratio of 1:2• the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron) seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75±0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0±0.5cmpneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0± 0.1cm wheel diameter.The neckrest assembly consshould be ts of upholstered Neckrest inner(material-PolyPropylene) with moulded Polyurethane foam and Polyster fabric.Upholstered inner should be fixed to Neckrest cover.Neckrest should be fixed to Back assembly through Neckrest spine .Neckrest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2°  Overall Dimensions of Chair: Seat Height - min 45.5 to max 55.5cm. Height - min 95.5 to max 105.5 cm. Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm

Supplying and placement of Godrej Make La Sede Visitor Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It is upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 46.5 cm. (w) x 59.5 cm. (d)visitor tubular frame: the tubular frame should be cantilever type and made of ø2.54± 0.03 cm x 0.02 ± 0.016cm thick ss 202 tube. the back should be connected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair: Seat Height -46.2 cm. Height -98.2 cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.7 cm

Supplying and placement of Godrej Make Topo CIrcle Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. WORKTOP : Worktop is made of combination of 12mm and 6mm thk Corian (matt finish), and 18mm thk Marine ply(BWP Grade)(As per IS:710) with 0.6mm backing laminate on bottom side. Corian is composed of acrylic resin and natural minerals that make it a non-porous, non-toxic, water-proof, seam-less and homogeneous surfacing material with resistance to scratches, stains, mould and mildew. The Worktop is available in 5 shapes, viz.: Circle, Bite, Rectangle, Square, & Facet. UNDER-STRUCTURE: The under-structure consists of an Inner Tube Assembly with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with Round / Rectangle / Square Bottom Plate. The Inner & Outer Tube Assemblies are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tub4 (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer Tube Assembly is made of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened & coated with rust preventive oil).

Supplying and placement of Godrej Make SIngle Sided Wood & Steel Book Rack from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Dimensions of Single Sided Wood & Steel Book Rack Base Unit shall be 900mm(W)x300mm(D)x1890mm(H). Rigid Knockdown construction . Back panel up to the bottom of third rack for additional rigidity . Racks, Back panel & Skirting : CRCA 0.8 mm thickness . Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides . Stackability shall have add-on units width wiseto form a bank of racks having common side panel . Bottom plus four fixed racks plus five storage levels . Each rack is provided with stiffener at bottom for strength . Uniformly distributed load capacity per each full shelf is 80 Kg maximum . Rack back stiffener shall be there at the rear side of the racks back stiffener s are provided . These are to support books on the rear side . Label Holder on each main unit to insert labels for identification . Finish shall be Epoxy polyester powder coated to the thickness of 50 microns .

Supplying and placement of Godrej Make Rectangular Workstation from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Make Modular Rectangular Workstation (1200W x 600D x 750H mm) along with Worktop Supporting Metal Pedestal. Panel height of 1200mm and thickness of 52.4mm on the main spine and 25mm on the return side. The spine comprises of blocks comprising of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. The panel structure made of aluminum extrusion having material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with epoxy-polyester powder. Top tile is split into Fabric tackable tile and split white board. The Fabric tackable tile shall be upholstered metal tiles in 0.6mm thick G.I. grade O as per IS: 277, with P.E. foam in the tile for tackablity. White board tiles shall be made of 8.0 mm thick particle board conforming to IS: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and will be having all its edges with minimum 0.5 mm thick PVC edging. The intermediate blocks made from 18mm thick PLB battens which hold 3mm MDF in between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this assembly shall be upholstered with approved shade of fabric on both sides using adhesive. Bottom tile is metal powder coated metal tiles in 0.8 mm thick M.S. CRCA Grade D as per IS: 513. Workstation panel of 52 mm thk (the spine panel) shall have provision of cutout for a 4 module on the block above worksurface and a 6 module electrical + 2 module data switch on the bottom block (below worksurface).

Supplying and placement of Godrej Make Store UP with Wooden Door from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Dimensions of Store Up 900 W MAIN BOND WHT shall be 900 mm W x 326 mm D x 785 mm H . The Construction shall be aesthetically appealing completely knock down construction made from 0.6 mm thk. CRCA as per IS - 513 . Horizontal stiffener shall be made from 1.2 mm thk. CRCA as per IS - 513 . The doors shall be made from 18 mm thk. interior grade pre-laminated board as per IS - 12823 or 18 mm thk . Plain particle board as per IS -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per IS - 2046 on either side . All edges shall be duly sealed with 2 mm thk. PVC edge banding . Two door with single lock on RH door . Locking shall be 10 lever cam lock lever at the bottom of the door .Shelving shall be Heightwise adjustable shelf 1 no. Uniformly distributed load capacity of 25 Kg UDL .The finish shall be Epoxy powder coated to the thickness of 50 microns . Overall Dimensions of Store Up 900 W WDN DOOR HL PINE shall be 448 mm W x 18 mm D x 783 mm H RH side door with lock. 448 mm W x 18 mm D x 783 mm H LH side door w/o lock . The doors shall be made from 18 mm thk. interior grade pre-laminated board as per IS - 12823 or 18 mm thk . Plain particle board as per IS -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per IS - 2046 on either side . All edges shall be duly sealed with 2 mm thk. PVC edge banding . It shall have two door with single lock on RH door .

Supplying and placement of Godrej Make Gent's Make Up Room Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Interio Make Up Room Table has electrical trunking , Storage and Leg Space. The module Should have C‐FRAME SYSTEM assemblies from hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994.Cframe should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C‐frame legs should be supplied with adjustable feet (tolerance from ‐5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus.The C‐Frames should be for cabinets that can slide through‐and‐through from one end of the workbench to the other through C‐Frames.HORIZONTAL MEMBERSThese should be made from rectangular pipes of 2mm thickness. Cross‐sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C‐Frames together as shown using Cclamps/ U‐clamps. Together with the C‐Frames and Horizontal Members connected together, the skeletal structure of the work‐bench is formed on which the worktop can be placed and the hanging‐type storage cabinets can be suspended.Removable Back Panels These cover panels cover the service lines that run behind them. These should be easily removable (unclipped) and the service line be accessed for maintenance. They should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness.ELECTRICAL TRUNKING housing electrical switches and sockets, data and voice points, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. It should be available in both, single sided and double sided configurations. It should be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. WORKTOP It should be 19mm (+/‐ 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V‐groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6mm thickness.

Supplying and placement of Godrej Make Ladies Make Up Room Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Interio Make Up Room Table has electrical trunking , Storage and Leg Space. The module Should have C‐FRAME SYSTEM assemblies from hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994.Cframe should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C‐frame legs should be supplied with adjustable feet (tolerance from ‐5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus.The C‐Frames should be for cabinets that can slide through‐and‐through from one end of the workbench to the other through C‐Frames.HORIZONTAL MEMBERSThese should be made from rectangular pipes of 2mm thickness. Cross‐sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C‐Frames together as shown using Cclamps/ U‐clamps. Together with the C‐Frames and Horizontal Members connected together, the skeletal structure of the work‐bench is formed on which the worktop can be placed and the hanging‐type storage cabinets can be suspended.Removable Back Panels These cover panels cover the service lines that run behind them. These should be easily removable (unclipped) and the service line be accessed for maintenance. They should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness.ELECTRICAL TRUNKING housing electrical switches and sockets, data and voice points, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. It should be available in both, single sided and double sided configurations. It should be made from CRCA MS with pure epoxy powder coating. The front surface that houses the electrical points should have a slope. WORKTOP It should be 19mm (+/‐ 2mm) thick Jet Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V‐groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6mm thickness.

Supplying and placement of Godrej Make Topaz Table 2100 with ERU 1200 & Pedestal from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Dimension:- 2100W x 2250D x 750H mm. Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade. confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

Supplying and placement of Godrej Make Topaz Backunit 1650W 750H 450D mm from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Dimension: 1650x450x750. Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security

Supplying and placement of Godrej Make Rio 2 Seater Sofa from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Size :Width : 132cm Depth : 84.5cm Height : 81cm Seating Height : 42cm. Frame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

Supplying and placement of Godrej Make Rio 1 Seater from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Size :Width : 85.5cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

Supplying and placement of Godrej Make Splenda Centre Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Size : Width : 120cm Depth : 60cm Height : 37.8cmTABLE METERIALS & SIZE :TOP: SOLID VENEER MDF TABLE TOP WITH 18 mm . LEGS: SOLID RUBBER WOOD.Color : CAPPUCINO

Supplying and placement of Godrej Make Splenda Corner Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Size : Width : 53cm Depth : 45cm Height : 45cmTABLE METERIALS & SIZE :TOP: SOLID VENEER MDF TABLE TOP WITH 18 mm . LEGS: SOLID RUBBER WOOD.Color : CAPPUCINO

Supplying and placement of Motions High Back Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression.TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal

Supplying and placement of Rio 3 Seater from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge.Overall Size :Width : 171cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

Supplying and placement of Godrej Make Wish Recta Workstation 1200W x 600D x 750H from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Make Modular Rectangular Workstation (1200W x 600D x 750H mm) along with Key Board Pull Out Tray, CPU Trolley & 3 Drawer Metal Pedestal.Panel height of 1200mm and thickness of 52.4mm on the main spine and 25mm on the return side. The spine comprises of blocks comprising of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. The panel structure made of aluminum extrusion having material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with epoxy-polyester powder. Top tile is split into Fabric tackable tile and split white board. The Fabric tackable tile shall be upholstered metal tiles in 0.6mm thick G.I. grade O as per IS: 277, with P.E. foam in the tile for tackablity. White board tiles shall be made of 8.0 mm thick particle board conforming to IS: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and will be having all its edges with minimum 0.5 mm thick PVC edging. The intermediate blocks made from 18mm thick PLB battens which hold 3mm MDF in between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this assembly shall be upholstered with approved shade of fabric on both sides using adhesive. Bottom tile is metal powder coated metal tiles in 0.8 mm thick M.S. CRCA Grade D as per IS: 513. Workstation panel of 52 mm thk (the spine panel) shall have provision of cutout for a 4 module on the block above worksurface and a 6 module electrical + 2 module data switch on the bottom block (below worksurface).

Supplying and placement of Godrej Make VSDU-7 from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Overall Dimensions of VSDU - 7 shall be 900mm(W)x450mm(D)x1830mm(H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 7 shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 7 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm .

Supplying and placement of Godrej Make Impress Table 2400 with ERU from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. The Main table shall be of size 2400 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H

Supplying and placement of Godrej Make Impress Backunit from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or, IGBC Certfied Manufacturers and as per approved drawing & design/specification of Engineer-in-charge. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H

Supplying and placement of Godrej Make Pisa 2 Seater Sofa from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 146.0 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.

Supplying and placement of Godrej Make Pisa 1 Seater Sofa from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Width (W): 86.0 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM. seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.

Supplying and placement of Godrej Make Pisa Corner Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge.Pisa corner table should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

Supplying and placement of Godrej Make Mingle Conferene Table 12 Str. from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Make Conference Table- Mingle Elegance 12 Seater Conference Table (3600W x 900D x 740H mm). Work Top-Made of 25mm thick MDFone side prelaminate board conforming to IS14587: 1998 with Work top 0.4mm PVC membrane pressed on to top and having chamfered edge. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product has a knock-down construction. AV Details-The table is equipped with Extron cables cubbies along with cable retractors as standard offering.

Supplying and placement of Godrej Make Ace Full Back Chair without Headrest from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum. armrests : the armrest should be having two adjustment, height (6.0±0.5cm) and depth (6.0±0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner. active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: • 360° revolving type• front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• tilt tension adjustment can be operated in seating position• 5 position tilt limiter giving option of variable tilt angle to the chair• seat / back tilting ratio of 1:2• the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron) seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75±0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0±0.5cmpneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0± 0.1cm wheel diameter.The neckrest assembly consshould be ts of upholstered Neckrest inner(material-PolyPropylene) with moulded Polyurethane foam and Polyster fabric.Upholstered inner should be fixed to Neckrest cover.Neckrest should be fixed to Back assembly through Neckrest spine .Neckrest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2°  Overall Dimensions of Chair Seat Height - min 45.5 to max 55.5cm. Height - min 95.5 to max 105.5 cm. Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm

Supplying and placement of Godrej Make Wish Recta Workstation from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Godrej Make Modular Rectangular Workstation (900W x 600D x 750H mm) along with Key Board Pull Out Tray, CPU Trolley & 3 Drawer Metal Pedestal. Panel height of 1200mm and thickness of 52.4mm on the main spine and 25mm on the return side. The spine comprises of blocks comprising of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. The panel structure made of aluminum extrusion having material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with epoxy-polyester powder. Top tile is split into Fabric tackable tile and split white board. The Fabric tackable tile shall be upholstered metal tiles in 0.6mm thick G.I. grade O as per IS: 277, with P.E. foam in the tile for tackablity. White board tiles shall be made of 8.0 mm thick particle board conforming to IS: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and will be having all its edges with minimum 0.5 mm thick PVC edging. The intermediate blocks made from 18mm thick PLB battens which hold 3mm MDF in between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this assembly shall be upholstered with approved shade of fabric on both sides using adhesive. Bottom tile is metal powder coated metal tiles in 0.8 mm thick M.S. CRCA Grade D as per IS: 513. Workstation panel of 52 mm thk (the spine panel) shall have provision of cutout for a 4 module on the block above worksurface and a 6 module electrical + 2 module data switch on the bottom block (below worksurface).

Supplying and placement of Godrej Make Upbeat 4 Seater Dining Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Upbeat 4 Seater PU Coated Dining Table having dimension of 1200W x 600D x 750H mm. It is a PU coated Cafeteria table is a 750mm Height table available with Cube leg. It is a standalone module with a seamless top. Upbeat Cafeteria table consists of: Worktop : Material : 25mm thk OSR MDF, E1 Grade board with PU painting of 2H hardness with 75% gloss as per colour chart on top side and 4 edges, Bottom side in white laminate. Legs: Cube leg for 750mm height are available. Cross members. Upper cross members are 50 x 25 x 1.2 thk (as per IS: 7138) tube.

Supplying and placement of Godrej Make Unwind Cafe Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, and Greenguard or IGBC Certfied Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. The seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance.The tubular weled frame is made from Dia2.22 +/- 0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am stainless Steel 202 grade tube.The tube are buff polished to give shiny finish. cm. The Shoes are made of high impact strenght polypropylene polymer compond with indoor grad UV Resistance and pressed fitted with tubularfram. SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm*(seat H) 45.0 cm. Seat Size 52.5cm(W)*53.2 cm(D). Back Size 51.6 cm(W)*40.5 cm (H)