Kalyani University Tender

Supplying & fixing ECO VINILY Print & pasting with the superior Malaysia imported quality 3 mm thick acrylic sheet ( LOGO pesting) including Ested 1960. Size of Logo = 30 inch x 30 inch = 900 sq. Inch ., also Depth of Logo - 3 inch including S&F 12V DC 1.5W sufficient / attaractive (White) intesity of Sumsung make LED Module .

Supplying & fixing imported heavy duty having IP - 53 , 12 Volt DC 500W Power Supply Unit / SMPS Make MAX INDIA 2 years warranty facility (Input Voltage AC 180 - 260 Volt , 50 / 60 Hz , 2.8 - 3.5A , Output Voltage - DC 12V + / - 5 % , 41.7A (CV) & Output Power (Pout) (W) - 500 with provision of isolation transformer , over voltage , over current & short circuit protection in fully water protected / suitable water proof enclosure to be fixed with the signage frame for driving total LED system of the signage in a equal distributed maner for uniform load sharing / as per instruction of EIC in view of long run continuous use including necessary interconnections. (NB- water proof type extra enclosure should be provided for additional protection of Power Supply Unit / SMPS made with Acrylic sheet )

Supplying & fixing imported 12Volt 1.5W DC LED modules having three LED in a Single base Module and LEDs will be emitted attractive white (CDL) colour and the two run of LED for each letter from starting end to finishing end / total area of the matter and shall be fixed properly in the male part of the Acrylic letters including necessary inter connections complete (For Actual / Pribable Matter UNIVERSITY OF KALYANI & LOGO & Ested 1960 ) Specification of the LEDs is given below : a) LED-white (Attractive White) CDL SAMSUNG make IP - 68 , 3 years warranty facility , HI RYTE / SASO b) Type - Straight , & 3 Nos. Led per module c) Life – 70,000 burning hours. d) Visibility – 100 mtrs at least, for normal eye e) Power consumption - 1.5 Watt per module f) Input - 230V AC , Output 12V DC ( For double layer LED)

Scffolding arrangement for working at 2nd. Floor level height of the building by making suitable heavy type scaffolding (Size 30 ft. Wide x 22 ft height) by bamboo,ropes & wooden planks etc. to be provided for execution of job and after completion of job it to be diamatled / as per direction of EIC. ,

Transportation Up & Dn. carrying charges of the above mentioned Acrylic letters and all others required accessories should be carrying carefully from Company`s workshop to site and work site to company`s work shop for residual accessiries.

Supply & drawing of 1.1 kV Gr. PVC insulated sheathed 3 Core 2.5 sq.mm cu. Wire Gloster / Finolex / Polycab Flat / Round cable ,(for Power supply unit AC input source.) .

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe as to GS ( 2 a / G1 )

S&F earth busbar of galvanized (Hot Dip) MS flat 25x6mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers,spacing insulators etc. as reqd.as to GS (4 a / G - 2)

Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised Hot Dip MS flat on wall / floor with GI Saddles / floor cutting / existing `L` hook as required and connecting to the equipments including drilled holes with bolts , nuts , washers etc. complete including mending good damages to finish as per GS [ G 3 / 5 d ]

Supplying and fixing PVC Rigid Conduit 'FR' Precision Make medium on wall, ceiling with saddles and other accessories as required and mending good damages to building works as per GS. 20mm size [ 7(a)/ E- 16 ]

25mm size [ 7(b)/ E- 17 ]

32 mm size (NS)

Supplying & fixing 3 hole facility CI water proof type looping cable box size 200 x 150 x 100 mm deep having hinged CI top cover with 4 mm thick rubber gasket lining railway type mechanical locking arrangement earthing terminal , porceline fuse etc complete. fixed on wall with Iron frame / concealed / as per position with necessary materials .. [ NS ]

Laying of GI Pipe 40 / 50 mm as below , after cutting tar road / floor / pavement / wall / tiels and making holes including embdding the pipes at an average depth 300mm as below and mending good the damages to original finish by CC morter 5:1 ratio including removing the rubbish .

Supplying & fixing medium gauge GI pipes (ISI - Medium) protection with necessary fittings and jointing materials as requiured (F-6 / 11. c) 40 mm dia

50 mm dia

Supplying & Fixing IP 65 230V 50 Hz 100W LED flood loight (Decorative colour changing light) 2 years warranty facility Diamond make in the existing fabricated grilled stepped type base of the fabricated box including making fitting fixing & connection complete .,

Supplying & fixing fabricated GI grilled box stepped type that which LED set to be rest by nut bolt ( Bottom portion) & size of the fabricated box 650x650x350mm approx for accommodating 3 nos. 100W flood light , the box should be made with 40x40x6mm GI angle & 20x6mm GI Patti / flat including 4nos split type leg 300 mm long each that to be grouted on the tar road by cuttng / drilling as required & filiing CC morter , out of 6 sides of the box 5 sides covered with the 20x6 mm flat at 25mm gapping horizontally & top portion 20x6 mm flat should be rest vertically & maintaing gap 35mm (approx)/ as suitable / as per instruction of EIC.

Supplying and fixing compression type gland complete with brass gland , brass ring & rubber ring for dust & moisture proof entry of XLPE / PVC armoured cables as below Dowels make gland.as per GS 4 Core 16 Sq. mm [7(c)/F4 ]

Finishing of the XLPE / PVC insulated armoured cable ends by crimping method incl. supplying & fixing solder less socket Dowels make , tapes , anticorrosive paste & jointing materials as per GS. 4 Core 16 Sq. mm Dowels make [ 8(b) /F5 xii]

Supplying & delivery 1.1 KV grade XLPE insulated Aluminium Armoured Power cable Gloster make following sizes - 4 core 16 sq.mm

Laying of cable 2 core 25 sq.mm and upto 4 core 16 sq.mm on wall / surface including S&F MS saddles double screw type with earthing attachment in 2 x 10 SWG GI (Hot Dip) wire making holes etc as necessary including mending good damages and finish. (F-1 / 2.a)

Supplying & fixing fabricated CPRI approved indoor wall mounted type double door system timer control type panel board made with 16 SWG sheet fixed on wall with 35x35x6mm angle iron frame , size of the panel box -800x400x200mm (LxWxD) approx having with electrical accessories 63A OE type L&T make SFU with 3 nos Din type HRC fuse - 1 no. cat no.- FN 63 TPN / FP SK95421 , 3 pole MNX - 32A Power Contactor L&T make - 1 no. having 230V magnet coil facility , 24 hours Analog type timer GIC make - 1 no. , Selector switch 16A KACEEY make for Auto / Manual mode - 1 no. , 63A 4 pole Isolator Siemns make - 1 no., SP MCB 10KA C characteristic - 16 nos. ( 1 no. for timer feeding , 12 nos for out going feeder & 3 nos for LED indication control) , Neutral bar , earth bar & SP MCB output receivimg & delivery terminal block - 12 nos , R Y B LED indication Lamp L&T / Siemens make , main wirrings should be use 16 sq. mm Cu. wire Polycab / Gloster / Finolex for SFU to power contactor , Power contractor to 4P 63A Isolator & 4P isolator to SP MCB 3x4nos . 2.5 Sq. Cu. wire for Selectot switch & 1.5 sq.mm Cu. wire for Indication Ckt. and all sizes of Cu. ends should be Socketed properly by Dowel make Cu. socket etc as required and the hole panel should be painted powder coated Siemens grey 9 tans treated .

Supplying & fixing spike earthing by 20 mm dia 6 ft. long GI earth electrode incliuding nut bolts & washers complete.

Connecting the equipments to eart electrode including S&F GI Hot Dip wire of sizesbelow on wall / floor as required and making connection to equipments with bolts nuts washers cable lugs etc. as required and mending good damages to possible finish. No. 6 SWG

No. 4 SWG

PART - B A.P.J. ABDUL KALAM AUDITORIUM SIGN BOARD.

Supplying & fixing square shaped fabricated GI structure ( 2.5ft x 29.5 ft + logo 2.5 ft x 2.5ft Total 72.5 sq.ft in additiona for logo 6.25 sq.ft) made with the 40x40x6mm GI angle 6 nos 2.5. ft long each for vertical support at 5.9 ft interval and also Horizontal support for top & bottom made with 40x40x6mm GI angle 29.5 ft long - 2 nos and 14 SWG / 2.0 mm thick 25 mm inner dia GI pipe 29.5 ft long x 4 nos for horizontal support in cluding letter fixing support and clearance of each pipe 10 inch / 250mm and also logo structure 2.5 ft x 2.5ft made with 25mm dia 14 SWG GI pipe as per instruction of EIC / as required . The GI structure should be fitted on the roof top by making ' T' shaped GI angle structure & it to be fixed on the roof top of the gate with the suitable fastner (10 mm dia x 75 mm long) / grouting nut bolts ( 10 mm x 75 mm) with anti rotating facility / as required including all necessary fixing materials and fabrication job complete also including S&F letter fixing screws etc as required.

Supplying & Fixing of superior Malaysia imported quality acrylic three dimensional letter flushed on the pre-fabricated existing GI structure with necessary materials .The computerized processed letter in bold English fonts (Aeonik bold) as per supplied matter by the EIC / Authority and the all letters should be milky white in colour & transparent with 0.40 white light glow & side black shall be placed / fixed in horizontal line maintanining suitable space with male & female attachments for each letter on the GI angle structure including necessary interconnections with the Power supply unit / SMPS as per direction of the EIC. The probable matter fonts is given below : A.P.J. ABDUL KALAM AUDITORIUM with logo & Estd 1960 .( Final Matter to be provided during execution of Job.) (,Height of letter 20 inches , width -3 inch , thickness 3 mm , No. of Letters - 23 & Depth of letter 3 inch ) ,Total - 20 X 23 = 460 inch. (Approx)

Supplying & fixing ECO VINILY Print & pasting with the superior Malaysia imported quality 3 mm thick acrylic sheet ( LOGO pesting) including Ested 1960. Size of Logo = 30 inch x 30 inch = 900 sq. Inch ., also Depth of Logo - 3 inch including S&F 12V DC 1.5W sufficient / attaractive intesity of Sumsung make LED Module .

Supplying & fixing imported heavy duty having IP - 53 , 12 Volt DC 500W Power Supply Unit / SMPS Make MAX INDIA 2 years warranty facility (Input Voltage AC 180 - 260 Volt , 50 / 60 Hz , 2.8 - 3.5A , Output Voltage - DC 12V + / - 5 % , 41.7A (CV) & Output Power (Pout) (W) - 500 with provision of isolation transformer , over voltage , over current & short circuit protection in fully water protected / suitable water proof enclosure to be fixed with the signage frame for driving total LED system of the signage in a equal distributed maner for uniform load sharing / as per instruction of EIC in view of long run continuous use including necessary interconnections. (NB- water proof type extra enclosure should be provided for additional protection of Power Supply Unit / SMPS made with Acrylic sheet )

Supplying & fixing imported 12Volt 1.5W DC LED modules having three LED in a Single base Module and LEDs will be emitted attractive white CDL colour and the two run of LED for each letter from starting end to finishing end / total area of the matter and shall be fixed properly in the male part of the Acrylic letters including necessary inter connections complete (For probable matter Fonts) A.P.J ABDUL KALAM AUDITORIUM , LOGO & Ested 1960) Specification of the LEDs is given as below : a) LED-white (Attractive White) CDL SAMSUNG make IP - 68 , 3 years warranty facility , HI RYTE / SASO b) Type - Straight , & 3 Nos. Led per module c) Life – 70,000 burning hours. d) Visibility – 100 mtrs at least, for normal eye e) Power consumption - 1.5 Watt per module f) Input - 230V AC , Output 12V DC (Double layer LED)

Scffolding arrangement for working at 2nd. Floor level height of the building by making suitable heavy type scaffolding (Size 30 ft. Wide x 22 ft height) by bamboo,ropes & wooden planks etc. to be provided for execution of job and after completion of job it to be diamatled / as per direction of EIC. ,

Transportation Up & Dn. Carrying charges of the above mentioned Acrylic letters and all others required accessories carrying carefully from Company`s workshop to site and work site to company`s work shop for residual accessiries.

Sypply & Drawing of 1.1 kV Grade single core stranded FRLSH / FR PVC insulated & unsheathed single core stranded copper wire Gloster / Finolex(Gold) / Polycab of follwing sizes in the pre laid polythene pipe and making connection complete. 2x36/0.3(2.5 sq.mm) + 1x22/0.3 (1.5 Sq.mm) as ECC.

Supplying & fixing following 415V TPN SFU Seimens make including 3 nos. HRC din type fuse as per rating on wall with iron frame / concealed ncluding mending good damages & finish. (NS) 415V 100A TPN SFU Cat. No.- 3KL8211-5TA10

Supplying and fixing sheet steel 16 SWG cable end box on TPN SFU Enclosure with nut bolts etc. Including powder coated painting . 63/125A FU [D-5/5] (63A - 1no.)

Supplying & delivery of 4 Core XLPE Insulated & Sheathed Armoured Aluminium power cables for Working Voltage up to 1100 Volts of following sizes . NS [ Make Gloster] 4 core 35 sq.mm.

Laying of one No. cable upto 35 sq.mn in under ground trench 460 x 760 mm average depth with brick protection on the top of the cable with 8 ( eight) nos. bricks per mtr. including road boaring also filling the space between the bricks and cables also the trench with shifted soil , leveling up and restoring surface properly. Upto 35 sq.mm (F-2 / 1. a)

Laying of cable from 3 / 3.5 / 4 Core 35 sq.mn to 50 sq.mm on wall /surface including S & F MS Saddles heavy type double screw type with earthing attachment in 2 x 10 SWG GI (Hot Dip) wire, making holes etc as necessary , mending good damages and possible finish. (F-1 / 2.c)

Supplying & fixing heavy type Dowles make compression type gland complete with brass gland, brass ring & rubber ring for dust and moisture proof entry of following XLPE/PVC Al. Armoured cables .- 4 Core 35 Sq. mm Dowels make [7(c)/F4 ]

Finishing the end of following XLPE Al. armoured cable by crimping method including supplying & fixing solder less socket Dowels make , tapes , anticorrosive paste etc complete. 4 Core 35 Sq. mm Dowels make [ 8(b) /F5 xviii]

Supplying & fixing CPRI approved IP56 fabricated ground fixing sytem Analog type 24 Hrs timer control feeding pillar box both side working facility ,2 part type hinged door system & self locking arrangement with almirah type handle having middle separator provision made with 16SWG (1.66 mm thick) sheet ,except saperator all through the box should be made with 12SWG sheet and back side remain only 415 V 200A Copper busbar 650mm long (25x5x650mm) for R Y B & N and 63A 4pole MCB Isolato Siemens make - 3 nos.and 3nos 4 way terminal block , & front part will remain all control accesories like 415 V 100A OE type SFU handel , 24 Hrs Timer , 3 pole power Contactor MNX 32 with 230 Volt magnet coil (Holding Coil) facility , Siemens make 10kA C series 32A 4 pole MCB - 1no., SP MCBs 10 KA C serie Siemens make (6-32A) - 16 nos , 63A FP pole Isolator Siemens make - 1 no. , 10A Selector Switch Kacyee / L&T make , 3 nos R , Y & B LED indication L&T / Siemens make etc as required and the size of the timer control feeding pillar box - 950 x 750 x 600 mm (approx) (HxWxD) with 40x40x6mm angle iron frame & 900 mm long 4 nos leg , the accessories should be properly wired with 6 sq.mm Cu. wire / 32A capacity Copper wire (As per instruction of EIC) & also required size Cu. wire Finolex / Gloster make , the controlling feeder pillar box should be painted with 9 tanks treated powder coated paint SIMENS GREY RAL - 7032 type and the details of pillar box & accessories given below - Size of the Control Panel / pillar box - 950 x750 x 600 mm (approx) made with all through 12 SWG sheet (2.5mm thick) except separator (16 SWG) both side working facility , 2 part type hinged door both side top & bottom self locking facility with Almirah type handel - 2 nos both side , including middle separator 2 nos. Size of the 415V Cu. busbar - 25x5x650 mm (approx) for R Y B & N made with electroliting graded Cu. bar / flat & the bars should be covered with the heat shrinkage PVC coloured cover / Sleeve as per norms & also required size sufficient nos. drilled holes & nut bolts complete. The bars of the busbar should be fixed rigidly with self supporting structure & on the 1100V grade 200A cap[acity DMC / bakelite insulator insulator base / FRP chair . The panel box should be 9 tank treated powder coated synthetic enamel paint also having rain guard facility 100mm long from the body of the control panel box surrounding the top , ventilation facility both side , earthing & danger board facility both side . Fabrication should be made as per instruction of EIC / as per supplied drawing and all opening will be covered with the rubber Gasket.. Back side of the pillar box will remain only Cu. Busbar 415V 200A capacity 650 mm long for R Y B & N (25x5x650 mm x 4 nos.), 4 Pole 63A MCB Isolator - 3 nos & 4 way terminal block - 3 nos. including wiring with the 6 sq.mm Cu. wire . Front side will remain all controlling accessorie as stated like 415V 100A L&T make SFU handel portion , Siemens make C Series 4 Pole 32A MCB - 1no, 4P 63A MCB Isolator - 1 no, SP MCB - 16 nos (1 no. for timer input , 3nos. for LED indication light. & 12 nos for 3 Phase circuit / 3 phase distribution like TPN DB , 24 Hrs.Analog type Timer , 3 pole power Contact , LED indication Lamp - 3 nos , 10A selector Switch - 1 no. Kaycee / L&T make , Neutral Bar 20 Way , Earth Bar - 20 Way - 1no.

Panel box Should be wired properly with 6 sq.mm / 32A capacity 1100V grade FR / FRLSH Copper wire Finolex / Gloster make for all incoming accessories and another part should be wired required size Cu. Wire / as per instruction of EIC and also all wire ends should be socketed required size Cu. lugs Dowells make including tapping complete. The frame / base / chair of control panel made with 40 x 40 x 6 mm MS equal angle having having no stagnation of rain water facility and 900 mm long 4 nos. leg that should be anti lifting facility including double coated painting .415V 100 A OE type SFU L&T make (FN 100 TPN ) Cat no. SK 95568 with din type fuse as per rating of SFU.. -1 no. The 415V 100A SFU should be connected with the main busbar by the same size Cu. Bar i.e. 25x5 mm size Cu. Bar / flat .3 Pole Power Contact MNX 32 L&T make Cat no.- CS94111 having coil voltage 240V 50 Hz..Siemens make - C Series 10KA 32A 4 Pole MCB - 1no. , SP MCB 6-32A - 16 nos.. and 63A FP Isolator - 4 nos. Analog type GIC make 24 Hrs Timer - 1 no having MCB control input ., Selector switch 10A Kaycee / L&T make - 1 no. , LED type indicating lamp R ,Y & B - 3 nos. L&T / Siemens make through MCB control .Neutral bar - 15 way - 1no. , 15 way Earth bar - 1 no. , DIN rail , required size GI nut bolts & washers , 1100 Volt grade coloured heat shrinkage cover / Sleeve , Danger Board , Earthing provision & both side 2 part type hinged door having top & bottom self locking arrangement .The complete panel board should be painted with 2 coats of power coated 9 tank treated synthetic enamel paint also provision of Earth bus , danger board etc as required as per system.Supplying and fixing PVC Rigid Conduit 'FR' Precision Make medium on wall, ceiling with saddles and other accessories as required and mending good damages to building works as per GS.

25mm size [ 7(b)/ E- 17 ]

32 mm size (NS)

Supply & drawing of 1.1 kV Gr. PVC insulated sheathed 3 Core 2.5 sq.mm cu. Wire Gloster / Finolex / Polycab Flat / Round for Power supply unit AC input source. .

Scffolding arrangement for working at 2nd. Floor level height of the building by making suitable heavy type scaffolding (Size 30 ft. Wide x 22 ft height) by bamboo,ropes & wooden planks etc. to be provided for execution of job and after completion of job it to be diamatled / as per direction of EIC. ,

Transportation Up & Dn. Carrying charges of the above mentioned Acrylic letters and all others required accessories should be carrying carefully from Company`s workshop to site and work site to company`s work shop for residual accessiries.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe as to GS ( 2 a / G1 )

S&F earth busbar of galvanized (Hot Dip) MS flat 25x6mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as reqd. as to GS (4 a/G - 2)

Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised Hot Dip MS flat on wall / floor with GI Saddles / floor cutting / existing `L` hook as required and connecting to the equipments including drilled holes with bolts , nuts , washers etc. complete including mending good damages to finish as per GS [ G 3 / 5 d ]

Laying of 1/2/3/4/5/6/7 nos & 20 / 25 / 32 mm dia PVC rigid conduit Precission make Medium / 4 Core 6 sq.mm XLPE Armoured cable in a single under ground trench 460 mm wide x 450 mm average depth including pavement / road boaring with brick protection on the top of the PVC rigid conduit with 8 (eight) nos. bricks Per mtr , including filling the space between the bricks & PVC rigid conduits and also the trench with shifted soil , levelling up and restoring surface duly rammed. (Used for Landscape Lighting Feeding & Shade lighting feeding route ) (NS)

Supplying & fixing medium gauge GI pipes (ISI - Medium) protection with necessary fittings and jointing materials as requiured (F-6 / 11. c) 40 mm dia

Supplying & fixing podium logo with Samsung LED Module with attractive white CDL in colour .( 10 inch x 10 inch)

Add Labour Cess 1%