Irrigation And Waterways Department Tender

Construction of cross bandth of overall length of 40 m, height 3 m of required trapizoidal section by dumping of cement polythene bag(50 Kg) filled & sewed with all kinds of earth (wet or dry), sand or agregates alongwith dewatering by suitable pump during the replacement work of suction pipe/valve of pump house. and dismantling & removing the cross bandth after completion of pump house work up to the satisfaction of EIC. Earth/ sand filled poly bag to be stacked at the location within 150 meter of sump pond bank or as desired by EIC.

Supply, delivery, storing at site, installation, testing & commissioning of Electromagnetic Full Bore Type Flow Meter comprising of flow sensor (i.e. flow tube), remote mounted flow transmitter, flow indicator (LED display of suitable size) and integrator and any other item required for completing the flow measuring system in single unit.Acceptable Makes Krohne / Siemens/ Endress Hauser/ ABB/ equivalent

Core Cutting of existing concrete wall with help of necessary Tools and Tackles & Labours. for Changing of Suction pipe Size:- 500 mm to 600 mm, Cutting Dia- 900mm X 500 mm thick.

i) 1st Year

Lowering, laying in position to correct line and level MS pipe line with flange joint with necessary gasket with / with out any cut coating on pedestal or chairs upon prepared formation for interconnection with newly laid pipeline. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling, tack welding and transportation up to 500M etc. complete as specified including hire charges of suitable capacity hydra and crane. a) Outer Dia. of pipe : 1220 mm, Thickness -10mm

Supplying and fabricating MS plate flange, properly ribbed one face machined, including drilling holes as per standard table, conforming to IS:1538 (Table-IV &VI) cutting & fixing are same with M.S. Pipe by electric arc welding, using standard electrodes as per IS specification and direction of E.I.C. shall approve the electrodes for arc welding before use. a) Outer Dia. of pipe : 1220 mm, Thickness -10mm

Supplying and fixing of PARABOLA NEO( 200 W) Industrial light Uniquely designed circular highbay with150 lm/W efficacy and 10 kV SPD as standard making it a robust solution for various industrial application. Ingress protection of IP66 with additional safety chain, fixing on ceiling with anchor/fastener etc, and other accessories as required and mending good damages to building works (Cat. no.- CIP-325-200-57-60D-HL5-LM-NSG) make:Crompton)

Dismantling or removing existing Suction Pipe , Bend and Bell Mounth including carrying. Loading, unloading and stacking and removal of material from work site to the departmental store or another site as directed excluding excavation and refilling including gas cutting (for Changing of Suction pipe Size:- 500 mm to 600 mm) as per specification and direction of Engineer-in-charge including hire charges of suitable capacity hydra.

Electrically operated monorail crane with supporting MS structure for trashrack lifting lowering. Design, supply, delivery, storing at site, installation, testing & commissioning of 5 M.T. capacity straight monorail placed for travel length of 54 mtr.(approx).The monorails shall be supported on goal post steel structure and top of goal post structure shall be covered by suitable sheet metal to protect the hoist from direct sun and rain. Both hoisting and LT motion electrical and to be operated by 1nos 5MT capacity wire rope type electrical hoist with electrical trolley and lift 9 mtr. The crane shall be suitable for outdoor operation of M-5 (Class II) duty, indoor operation as per IS: 807, IS: 3177or equivalent at its latest revision. This work also includes design, manufacture supply & fixing of 1sets of DSL arrengement and isolating switch for feeding power to the crane along longitudinal travel comprising of 4 line PVC shrouded type GI conductor with supporting brackets and a set of current collector for each hoist. The crane should be marked with safe working load (SWL). The whole work must be completed in all respect including painting as per direction of E.I.C.

Cast iron double flanged, non rising type, manually operated sluice valves generally conforming to IS 14846 : 2000, IS 1367. Nomoinal Diameter in mm =600 Material: Body, bonnet, wedge, stuffing box gland: Cast iron (IS:210, FG 260) Spindle: Stainless steel (AISI410) Body seat and disc seat: Stainless steel (SS 304) Packing: Greasy jute packing Fasteners: IS:1367, Class 4/ 4.6 Extended spindle: Mild steel (BS: 970, EN8) Head stock: Cast iron (IS: 210, FG 260) Hand wheel: Cast iron (IS: 210, FG 260) (Make: IVC/ Fouress/ Audco/ Sigma Flow/ Kirloskar / Fouress / Durga / AVK/ Venus/Kalpana Valves/ equivalent)

Comprehensive maintenance contract of Submersible Pump Motor set for Five (05) calendar year after completion of one (01) year of defect liability period. Pump Motor set along with its allied system shall be maintained as per maintenance manual provided by the manufacturer.

Manufacturing, , supplying installation of spirally welded/ERW/ SAW/fabricated MS pipe (commercial quality) including procurement of plates, gas cutting to required size, welding, assembling in suitable length to form pipes welded on automatic welding machine and forming V edge on both ends of pipe including freight, unloading transport to store/site, unloading, stacking etc. complete as per IS-3689 and IS 5504 as applicable as per specifications ( No negative tolerance in thickness is permissible). a) Outer Dia. of pipe : 1220 mm, Thickness -10mm

Supply, delivery, storing at site, installation, testing & commissioning of double acting automatic air relief valve of nominal size 100mm as per IS 14845 with isolating mitre bevel geared sluice valve as per IS 14846 complete of material body & top cover- CI, IS 210 FG 260, internal fittings- bronze IS 318 LTB 2, hardware in contact with water- SS 304 and as per following specification. Working Pressure Body/seat - 7 / 5 kg/cm² Design Pressure Body/seat - 18 / 12 kg/cm² Testing as per IS 14846

ii) 2 nd year

Supply, delivery, storing at site, installation, testing and commissioning including trial run of vertical non clog dry installed submersible (flood proof) pump coupled with motor alongwith SITC of suction Bowl, Puddle pipe , Bend and concrete work (for padestal) related with installation work as per following specification and as per direction of EIC. Pump should be suitable for pumping solid bearing liquid such as wastewater, industrial discharge, storm or canal drainage etc. in both dry and submergerd condition. Rated discharge - 2040 M³/Hr (each) TDH (Range)= 3.5 to 8 MWC AOR (Capacity)= 60% -140% TDH (rated) = 6 MWC Motor: 75 KW, 3ph squirrel cage induction motor, IE3 type as per Standard IEC 6003450Hz, 415V, IP-68 protection, S-1 duty, insulation class- F, temp. rise class-B, motor will be oil cooled or ethylene glycol water mixture through cooling jacket. Motor rpm /= 750 Motor efficiency - 92% (minimum) Pump efficiency -minimum 80% (at Duty point) Grease lubricated ball and roller type bearing, life- 100000 hr. Casing- FG 260, Shaft- SS 420 Impeller- Duplex stainless steel / SS 316L Solid handling size- 50mm (minimum), Sp. Gr. Of liquid to be handled - 1.04 (approx.), Along with submersible cable of 50 m length. (Acceptable Make: KBL, KSB, GRUNDFOS, SULZER, Wilo Mather and Platt, XYLEM (FLYGT), WPIL or any approved Make)

Cast iron double flanged, non rising type, manually operated sluice valves generally conforming to IS 14846 : 2000, IS 1367. Nomoinal Diameter in mm =500 Material: Body, bonnet, wedge, stuffing box gland: Cast iron (IS:210, FG 260) Spindle: Stainless steel (AISI410) Body seat and disc seat: Stainless steel (SS 304) Packing: Greasy jute packing Fasteners: IS:1367, Class 4/ 4.6 Extended spindle: Mild steel (BS: 970, EN8) Head stock: Cast iron (IS: 210, FG 260) Hand wheel: Cast iron (IS: 210, FG 260) (Make: IVC/ Fouress/ Audco/ Sigma Flow/ Kirloskar / Fouress / Durga / AVK/ Venus/Kalpana Valves/ equivalent)

Dismantling or removing existing pipeline , jointing materials, including carrying. Loading, unloading and stacking and removal of material from work site to the departmental store or another site as directed excluding excavation and refilling including gas cutting as per specification and direction of Engineer-in-charge including hire charges of suitable capacity hydra and crane. a) Outer Dia. of pipe : 1220 mm, Thickness -10mm

v) 5th year

Design, supply, delivery, storing at site, installation, testing & commissioning of 5 MT capacity MS lifting beam as per IS IS 13591 (1992) for automatic engagement and disengagement of trash rack with all necessary accessaries including painting and as per direction.