Irrigation And Waterways Department Tender

Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

Supplying & fitting fixing of trunion beam made of ISMB 300 of length 1 meter x 2 nos each both sides of pier of gate, 12 mm thick MS plate & welded the side with MS plate 8 mm thick of size 0.6 mtr x 0.35 mtr x 2 nos after necessary drill hole for fixing of both beam & strengthening by MS gusset in triangular shape by welding & MS anchor by MS flat size 50 mm x 6 mm x 125mm long each x 6 nos at an interval 0.25 mtr for fixing with cement concrete(1:1.5:3) at wing wall including all cost to complete the job at site as per direction of EIC.

Replacing the old gate shutter by dismantling two arms from trunion assemblies & supply of new fabricated redial gate shutter above the size of 10 sq. m for all head / cross regulator or distributory gate including its instalation complete in all respect. Gate shutter (10 mm thick skin plate) to be febricated confirming relevent I.S Code i.e I.S.- 4623 . Drawing & material (make SAIL or TATA) be approved by the E.I.C. Cost also includes transportation ( upto 300 m) & stacking of old Shutter in the dept. godown or as directed by E.I.C.

Manufacturing of arm of gates as per existing sample at site to be fabricated by ISMB 250 - 4.3m x 2 nos/arm welded with M.S. angle of size 75mm x75mm x8mm as supporting Tie of total length 10.8m/arm, MS back plate of 12 mm thick of size 0.430m x 0.310m x 2 no. per arm, MS hinge plate of 16 mm thick of size 0.300mX0.310m x 2 no per arm, MS arm base plate of 20 mm thick of size 0.410mX0.310m x 1 no per arm, Tie by MS angle ISA 130x130x8 mm thick of L=0.125m x 4nos per arm by welding including cost of welding , cost of materials, nuts & bolts, transportation cost , cost of labour, materials handling charges, hire charges of T&P etc to complete the job as per direction of E.I.C.

Supplying & fitting fixing of new Structural steel. guide path of radial type cross regulator canal gate by Structural steel. plate of size 8 mm. thick x 6" width x length 9' - 6" of above along with anchor of St. steel. angle of size 40 mm. x 4 mm. x 150 mm at 1" - 0" space interval in jig jag way welded at one end and bifurcated by 2" at other end with prior necessary civil work of cement concreting 1:1.5:3 in proportion with proper alignment including plasting etc. after dismantling the old, damaged guide path from its existing position. The cost includes dismantling charges of guide path from its existing concrete structure, supply of all steel material, cost of related concreting by supplying sand, cement, stone etc. labours, material handing, transportation, scaffolding, hire charges of T&P etc. to complete the job at site as per direction of E.I.C.

Extra on above item Supplying & Fitting Fixing SS Plate of 6mm thickness x 150mm width of required length clading with suitable section of above item of vent as per direction of EIC. Including cost of materials, cost of welding, tottaly cost of labour, T&P etc to complete the job.

Cost for Supply & fitting fixing of new Neoprene rubber seal as per IS: 11855-1986 with MS flat of size 50 mm x 10 mm, GI. CS bolts & nuts with washer of size dia 1/2", length 2.5",araldite for rubber seal corner joint as required rubber seal as given below, the cost includes, material cost, welding & drilling cost , hire charges of T&P, transportation, manpower etc. to complete the job at site asper directionof EIC. Cost for supply and fitting fixing of new neoprene rubber seal of solid bulb musical note type of size flat portion 100mm x 12mm, bulb OD=45mm.

Cost for replacement of new flat type neoprene bottom rubber seal of size 100mm (W) x 14mm(T) as per IS : 11855-1986 with MS flat of size 50mm x 10mm GI,CS bolts & Nuts with washer of size dia 1/2" x L=2.5" ardalite for rubber seal corner joint as required rubber seal as given below. the cost includes material cost welding & drilling cost, hire charges of T&P, Transportation manpower.

Manufacturing, supplying and fitting fixing of gate guide roller of size 100mm O.D. 50mm I.D. 40mm width made of cast steel & gun metal bush of size 50mm O.D. 25mm I.D. 40mm long inside the guide roller along with SS pin of size 25mm dia 65mm long complete including cost of materials, cost of POL for lubricating the guide roller assembly, transportation cost, hire charges of T&P etc to complete the job as per direction of EIC.

Cost for removing of old paint, rust, foreign contaminants etc. from dismentalled gate shutter, hoisting arrangement,electrical panal,pipes by scrapping, cleaning, rubbing, chipping by any means & preparing the surface to receive new coat of paint. The cost including cost of materials, labours, etc. to complete the job at site as per direction of E.I.C.

Cost for supplying & application of Primer with Epilux - 610 Primer Grey of approved brand on cleaned surface of dismentelled gate shutter,panel box, structural steel of trestle bridge including thinner Epilux - 844 brush & other materials as required, labours, brush, compressor, painting equipments etc. to complete the work at site as per direction of E.I.C..( For fitted gate shutter ,cost of scaffolding to be added.) For 1st coat of Primer ( Epilux-610) ( Manual painting)

Cost for supplying & application of Paint with Epilux - 5 coal tar epoxy of approved brand on cleaned surface of dismentelled gate shutter, panal, pipe, structural steel of trestle bridge including thinner Epilux - 844 brush & other materials as requiored, labours, brush, compressor, painting equipments etc. to complete the work at site as per direction of E.I.C.( For fitted gate shutter ,cost of scaffolding to be added.

For 1st coat of paint ( Epilux -5) (Manual painting)

For 1st coat of paint ( Epilux -5) (Manual painting)

Bailing out water by pump including all leads and lifts and including making all arrangement for disposal, where continous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically of ascertained as per direction of Eingineer-in-charge.

Cost for maintenance of winch M/C i.e. lifting gear train hoist, plummer block with supply of necessary materials such as Jute, sand paper, H.S.D. for cleaning and washing Mobil, Grease for proper lubricating and supply and fitting, fixing of missing Nut & Bolts etc. to complete the job at site as per direction of E.I.C.

Supply, fitting fixing upto 18 mm. dia rope 6x36 SW, 1960 N/sqmm (Tensile) & steel care for radial gate after opening and taking out old damaged steel wire rope, rope fixtures, clamps etc. incl. the charges of T&P, cost of labour and other incidental charges upto the satisfaction of EIC.

Scrapping, cleaning wire rope, (upto dia 18 mm, 22m length x 2 nos) rope drum, pulley and greasing/lubricating/lubricating the same and also providing protective coating on cleaned ropes by using wire rope compound servo coat-140 or approved wire rope compound by E.I.C. including setting the wire rope in proper alignment and position as necessary inclusive all cost of labour, T&P, scaffolding charges, cost of P.O.L. & protective compound & all other incidental charges complete in all respect upto the satisfaction of E.I.C.

Removing earth/sand filled poly bags/gunny bags from the channel bed/slope and initially depositing the same near channel bank at a place as directed by the Engineer-in Charge for measurement of Bag. & then disposing off the same at a distance not less than 150 metre from the channel site.