Irrigation And Waterways Department Tender

Supply, delivery, storing at site, installation, testing & commissioning of Electromagnetic Full Bore Type Flow Meter comprising of flow sensor (i.e. flow tube), remote mounted flow transmitter, flow indicator (LED display of suitable size) and integrator and any other item required for completing the flow measuring system in single unit.Acceptable Makes Krohne / Siemens/ Endress Hauser/ ABB/ equivalent

Supply, delivery, storing at site, installation, testing of Pressure guage of suitable range at delivery flanges complete with copper tubing and control cocks. The gauges shall be of direct mounted stainless steel diaphragm sealed type. The dial size of pressure gauge shall not be less than 150 mm. The material of construction shall be suitable for sewage/ drainage pumping station installations. Each pressure gauge shall be complete with pressure snubber and of suitable class of enclosure. Accuracy shall be ±1.0% of full-scale range or better. Scale range shall be selected so that normal system pressure is approximately 50% of full scale. The Gauges should conform to the latest revision of IS:3624/ BS:1780/ equivalent. Testing as per IS 3624. Make: any reputed make approved by Engineer in charge

Supply, delivery, storing at site, installation, testing of Mechanical Level indicator mechanical float chord type complete with bottom anchor, guide wire, spring tension assembly and friction free pulleys. The pulleys and the chord shall be with weather proof enclosure. The scale shall be with black graduation on white background with red pointer attached to the counter weight. Material of Construction Float: SS 316 Float guide: SS 316 Chord: SS 316 wire Pulleys: Cast aluminium alloy (Make: any reputed make approved by Engineer in charge)

Electrically operated monorail crane with supporting MS structure for trashrack lifting lowering. Design, supply, delivery, storing at site, installation, testing & commissioning of 5 M.T. capacity straight monorail (02 nos) placed at a distance of 1.5 mtr(approx.) for travel length of 28 mtr.(approx). Both the monorails shall be supported on goal post steel structure and top of goal post structure shall be covered by suitable sheet metal to protect the hoist from direct sun and rain. Both hoisting and LT motion electrical and to be operated by 2nos 5MT capacity wirerope type electrical hoist with electrical trolley and lift 7 mtr. The crane shall be suitable for outdoor operation of M-5 (Class II) duty, indoor operation as per IS: 807, IS: 3177or equivalent at its latest revision. This work also includes design, manufacture supply & fixing of 2sets of DSL arrengement and isolating switch for feeding power to the crane along longitudinal travel comprising of 4 line PVC shrouded type GI conductor with supporting brackets and a set of current collector for each hoist. The crane should be marked with safe working load (SWL). The whole work must be completed in all respect as per direction of E.I.C.

Design, supply, delivery, storing at site, installation, testing & commissioning of 5 MT capacity MS lifting beam as per IS IS 13591 (1992) for automatic engagement and disengagement of trash rack with all necessary accessaries and as per direction.

EOT crane inside pump house. Design, supply, delivery, storing at site, installation, testing & commissioning of 15 M.T. capacity x 5.5 mtr span x 8.0 mtrs. lift double girder pendent controlled semi EOT travelling crane having hoisting and CT motion electrical and LT motion manual to be operated from floor by hand chain. The crane shall be of M-5 (Class II) duty, indoor operation as per IS: 807, IS: 3177or equivalent at its latest revision. This work also includes manufacture supply & fixing of long travel steel gantry girder with square rail for travel length of 28.60 mtr. and designed for maximum column pitch distance of 3 mtr. and DSL arrengement for feeding power to the crane along longitudinal travel comprising of 4 line PVC shrouded type GI conductor with supporting brackets and a set of current collector. The crane should be marked with safe working load (SWL). The whole work must be completed in all respect as per direction of E.I.C.

Comprehensive maintenance contract of Submersible Pump Motor set for Five (05) calendar year after completion of one (01) year of defect liability period. Pump Motor set along with its allied system shall be maintained as per maintenance manual provided by the manufacturer.

i) 1st Year

ii) 2nd year

iii) 3rd year

iv) 4th year

v) 5th year

Carriyng out CFD analysis of the sump as per design and drawing , based on details of pump being offered at reputed educational institute/ laboratory with prior approval of E.I.C. and to provide suitable arrangement of flow guides, buffers, splitters etc. at the sump to achive smooth pump operation free from vortex, pre rotation, swirl etc.

SITC of 11 KV, 1250 Amps 3 PANEL with 11 KV, 1250 Amps25/26.2 KA VCB switchgear along with Panel top moounted P.T. as per enclosed specification. 1 no. Incomer feeder 2 nos. Outgoing feeder for 1000 KVA, 11 KV/433 V, 3 phase, 50 Hz Δ/λ, Dyn 11 outdoor ONAN type transformer. (Make- Siemens, Pascal, Schneider,ABB) Each panel consists of following items: RATING: 1250A BUSBAR 1250A COPPER (25KA for 3sec) - 1no A: MOVING PORTION: A1: 11KV, 1250A, 25/26.2 KA for 3sec VCB - 1no A2: VCB Enclosure + 1250A Copper connections - 1no A3: 1250A PVC sleeved Copper Bus Bars -1no B: CT AND PT DETAILS: B1: 2 Core CT: CTR:200/1A+1A - 3nos CORE 1: For metering, class-0.5, 15Va CORE 2: For Protection, Class-5P10, 15VA B2: 3 Nos 1Phase PTR:11KV/v3/110V/v3, Cl. 1 50VA (Panel top/bottom mounted PT) (Drawout type) - 1no C: BREAKER PANEL INDICATION LAMPS: C1: BREAKER On/OFF/Trip circuit Heathy/ Spring charge indication/ Breaker test position/ Breaker service position.- 6nos C2: R-Ph./ Y-Ph./ B-Ph. -3nos D: SWITCHES AND OTHER ACCESSORIES: D1: DC ON/ OFF Switch- 1no D2: AC ON/ OFF Switch-1no D3: Auxiliary contactor (2NO + 2NC) - 1no D4: Heater with heater switch & thermostat -2nos D5: Cubicle illumination lamp-1 D6: 15A, 230V, 3 pin plug & socket and MCB -1no D7: Local Remote Switch -1no D8: T-N-C Switch -1no D9: Mech. On-OFF push button -1no D10: TTB -1no D11: Buzzer- 1no E: METERS & TRANSDUCERS: E1: Ammeter with selector switch -1no E2: Voltmeter with selector switch- 1no E3: Digital MFM (Model: EM6400, CI-1.0 SCHNEIDER MAKE)- 1no F: RELAYS F1: Numerical relay communicable on MODBUS protocol MICOM P 127/equivalent with Power Pack Unit- 1no F2: Mastertrip lockout relay VAJH 13 (86)- 1no F3: Electromechanical type DC fail relay VAA21 -1no F4: Electromechanical type Trip circuit Supervision Relay (VAX31)- 1no & Transformer Buchloz/winding temparature/Relay PT should be drawout type & Power pack unit must be provided for tripping circuit Cable entry box both side (Incomer & Outgoing) suitable for 3C X 240 sq. mm XLPE 11KV grade cable.

Supply,delivery, storing at site, installation, testing & Commissioning of 1000 KVA, 11 KV/433 V, 3 phase, 50 Hz Δ/λ, Dyn 11 outdoor ONAN type transformer in IP 55 enclosure with copper windings, OFF load tap changing arrangement in steps of + 1-2.5% & - 7.5%, having HTcable end boxes with cable gland plate suitable for terminating 11KV,3C x 240 sqmm XLPE/ ARMD, AL cables for primary side and1.1KV, 6 x 3½C x 300 sqmm. XLPE/ARMD, AL cables on the secondary side, three channel temperature scanner for continuous monitoring of the windings , with supply of all associated materials and accessories like oil conservator, silica gel breather,Bucholtz Relay, mounting channels bolts ,nuts washers, screw, clamps, painting, earthing etc.and confirming to IS- 1180 (Level-1) and as per specification as laid down in the contract complete in all respect as required at site including construction of required size CC pedestal above flood level. Make- Schneider/ KEC /CGL/ABB/Automatic Electrogear/Century/True Volt.

LT PANEL AT PUMP HOUSE Supply, delivery, storing at site, installation, testing & commissioning of 415V (35MVA) TPN floor mounting free standing LTpanel made of min. 2mm thick sheet steel and stiffened by angle iron frame as necessary extensible on either side totally enclosed, dust and vermin proof, self supported, free standing unit with base channel, multi tier, compartmentalised cubicle, front access type construction with details of feeders as given below. LT panel shall be suitable for 500/415VAC 50HZ, 3-phase and neutral system.Panels shall be treated with seven tanks process before painting with two coats of epoxy paint over two coats of epoxy primer/powder coated paint all of approved shade complete with front operated incoming and outgoing switchgears, cablealleys, provision for cable entries from top and bottom, necessary meters, internal wiring with1.1KV, copper wire (2.5 sq.mm) protection HRC fuse etc terminal blocks, selector switches, inter connection with insulated(1.1KVgrade) colour coded copper conductor cable, gland plates, earth bus of copper, lifting bolts, level inscriptions, earth connections etc and supply of all necessary accessories all complete and mending good the damages as required. Make- Siemens/L&T/ABB/Schnider Note:All works are to be done in accordance with I.E.rules and regulation and as per direction of Engineer-in-charge.GA drawing for each panel has to be get approved by the engineer-in-charge before manufacturing the same. (A) Incomer -2set each set comprising the following items (i) 1-Nos 1600A FP, 433V, 50 KA, Air Circuit Breaker (ACB) (ii) 1-set (3 Nos in each set) 15VA, 1250/5A, CL-1 for metering CTs (iii) 1-set cable termination arrangement suitable for 6 nos x 3½ C x 300 sq. mm., 1.1KV, XLPE /A, AL cable (iv) 1-set 0-1250A AC flush mounting digital ammeter with selector switch. (v) 1-set 0-500V flush mounted digital voltmeter with selector switch (vi) 1-set ON/OFF/TRIP/TRIP CIRCUIT HEALTHY lamps and push buttons (vii) 1-set R/Y/B phase indication lamps (viii) 1-set TRIP/NEUTRAL/CLOSE selector switch (ix) Earth bus-bar and all other accessories complete (x) Annunciator unit. 8W (xi) 1-set Multi Function Meter (B) Bus-Bars 2-Set TPN, 500/415V, 1600A, 50Hz, 35 MVA continuous rated copper bus-bar with insulating sleeves (C) Bus-Coupler (i) 1-Nos 1600A FP, 433V, 50 KA, Air Circuit Breaker (ACB) with indication & inter-locking. (D ) Outgoing (i) 9 nos-400A TPN 500/415V, AC 50KA breaking capacity MCCB microprocessor based. Fully Automatic Star Delta Starter (FASD) for operation of 1110 KW Submersible pump motor having 3nos. 300A, 415V, TP AC 3 contactors and timer 0-30 sec CT operated thermal O/L relay having suitable setting range with single phase preventor MN-12-L, ON/OFF/TRIP lamps, START/STOP push buttons, 0-500A, CT operated digital ammeter with 500/5A

class-1 CTS and selector switch, local/remote selector switch, temperature scaner (Masibus/Minilec make) including provision of Moisture sensor/oil, water leakage/ Bearing & winding temperature, completely wired up to the terminals (for 8 nos Submersible pump & 01 no spare) including supplying and installation capacitor bank of 80 KVAR or suitable rating to reach improve power factor near to 1, delta connected double dielectric heavy duty Metalised poly propylene -Heavy duty (MPP-H) power factor correction capacitor 415V AC, 3ph, 50Hz, as per IS:13340 & IEC specification to be connected directly in parallel with the 125 KW motor terminals including supply and installation of Reactor/ Inductor coil with approprite siz of Power contactor, time delay timer Auto manual selector switch, Indicating Lamps(ON-OFF)& control fuses etc. against each module. (ii) 5 nos- 100A TPN 500/415V MCCB with breaking capacity of 50 KA including 0-100A CL-1 digital ammeter with 60/5A class-1 CTs and selector switch and ON/OFF/TRIP indication light complete ( 1 no for EOT crane, 1 nos for LDB, 1 nos for PDB, 2 nos spare). (iii) 1 nos- 250A TPN 500/415V MCCB with breaking capacity of 50 KA including 0-250A CL-1 digital ammeter with 250/5A class-1 CTs and selector switch and ON/OFF/TRIP indication light complete ( 1 no for office building, VCB room etc.). (iv) 1 nos- 160A TPN 500/415V MCCB with breaking capacity of 50 KA including 0-200A CL-1 digital ammeter with 200/5A class-1 CTs and selector switch and ON/OFF/TRIP indication light complete ( 1 no for street lights, indoor light of pump house etc.)

(E) Earth bus-bar Continuous earth busbar of 50 x 6mm G.I. flat running continuous through out the length of the switch board with earthing terminals.

I/C and O/G PANEL AIR CIRCUIT BREAKER AT SUB-STATION Supply,delivery, storing at site,erection testing & commissioning of indoor/outdoor as required, floor mounted metal clad totally enclosed horizontal cubicle fully compartmentalized,extensible on either side motor operated spring charged, electrically/manually operated fully draw-out type 433V Air Circuit Breaker(ACB) Board having rupturing capacity of 35MVA at 433V conforming to specification etc and detail shown in single line diagram and as described below Including supplying necessary mounting channels and all other mounting accessories complete.LT panel shall be suitable for 433V AC 50HZ,3 phase and neutral system. Make- Siemens/L&T/ABB/Schnider Note:All works are to be done in accordance with I.E.rules and regulation and as per direction of Engineer-in-charge.GA drawing for each panel has to be get approved by the engineer-in-charge before manufacturing the same. (A) Incomer/ Outgoing (i) 1-Nos 1600A FP,500V, 50 KA, Air Circuit Breaker (ACB) (ii)1-set (3 Nos in each set) CT with CTR 1600/1A, 15VA,CL-1 for metering . (iii)2-set cable termination arrangement suitable for 6 nosx 3½ -C x 300 sqmm.1.1KV, XLPE /A, AL cable (iv)1-set 0-1600A AC flush mounting digital ammeter with selector switch. (v) 1-set 0-500V flush mounted digital voltmeter with selector switch (vi) 1-set ON/OFF/TRIP/TRIP CIRCUIT HEALTHY lamps and push buttons (vii) 1-set R/Y/B phase indication lamps (viii) 1-set TRIP/NEUTRAL/CLOSE selector switch (ix) Earth bus-bar and all other accessories complete (x) 1-set Multi Function Meter

Supply, Installation , testing & commissioning of battery charger (make: Exide/ Life Line/Electroservice) with DCDB of 30 volt DC, considering of 15 to 16 nos dry maintenance free batteries (make:Exide/Amron) of 180 AH capacity , complete with metal racks & all other accessories housed in a common floor mounted enclosed & properly Ventilated sheet steel Cubicle ( IP-42) including preparation of Pedastal, Position of charger & batteries including necessary inter connection as supply, painting, earthing all complete as per specification.

Supplying fitting fixing fabrication of MS ladder tray, hanger, masonary trench cover fabricated with MS angle, chanel, flats etc with painting for cable and electrical accessories.

Supplying and fixing of 5.0 kg capacity fire extinguishers (Dry chemical type) to be fitted in wall with suitable bracket including cutting,chipping and mending good the damages.

Supplying and fixing 9 lts. Capacity MS fire bucket coloured red.

Supplying and fixing of shock treatment chart duly framed with glass on wall with necessary screws.

Supplying and fixing of 250 mm x 250 mm x 2 mm thick danger boards with screws.

Supplying and delivery high high voltage tested electrical rubber mat size (1mte x 2 mtr) and thickness 25 mm at site.

Supplying and fixing of First Aid Box with all items as required by rule on MS Bracket including mending good the damages.

Supplying and laying of following sizes of 1.1KV grade XLPE insulated armored copper cable in excavated trenches, erected cable tray/ladder tray, pipes and masonary trench through under ground etc. including jointing and connector etc. as and where required as follows:

7C X 2.5 Sqmm XLPE/A Cu Cable.

3C X 2.5 Sqmm XLPE copper cable

Supplying & fixing SS enclosure of suitable size for housing the following accessories as required with DIN rail etc. including supplying the following accessories a)240VAC analog time switch for ON-OFF control of street light, b) 3 pole power contactor type ML 2, 40A current rating, Toggle switches etc.

Supply and fixing of LED Flood light (350 Watt) with IP66 protection. Available in MB/WB angles. 10KV SPD complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/providing clamping arrangement & necy. GI reducer as required including S&F necessary anchor/fastener & S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. ( make:Crompton, Cat no- CFS-501-350-57-60D-HL2-GL-NGG )

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL with necessary bars for provision of 3 ph. 4 wire cable connection on porcelain insulator etc. and housing the same on wall where necy. incl. painting. 250 x 250 x100 mm

Supplying & laying of 4 Sq.mm 3 Core PVC 650 V/1100 V Grade insulated unarmoured, stranded Copper cable in prelaid PVC polythene pipe. (make-KEI/Gloster )

Supplying and fixing of PARABOLA NEO( 200 W) Industrial light Uniquely designed circular highbay with150 lm/W efficacy and 10 kV SPD as standard making it a robust solution for various industrial application. Ingress protection of IP66 with additional safety chain, fixing on ceiling with anchor/fastener etc, and other accessories as required and mending good damages to building works (Cat. no.- CIP-325-200-57-60D-HL5-LM-NSG) make:Crompton)

Supplying & fixing of wall mounting fan (heavy duty) with blades AC 230-250, sweep 600 mm (24"), 1 Phase make (crompton or any approved )