Irrigation And Waterways Department Tender

Supply & Testing of Soil Thermometer as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty. Soil Thermometer Soil Thermometer Range 0° to 200° C Made of Glass Product Material: Case: Aluminium Glass Tube: Kerosene filled Product Dimensions : Length ‐ 210mm Stem Case diameter ‐ 9.5mm Knob diameter ‐ 22.5mm Product Weight: 43g The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supply & Testing of Pointerscale as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty. Pointerscale Thread Counter With Led And Pointer (Magnifier With Scale) The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supply & Testing of Electronic balance as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty. Electronic balance Electronic Weighing Scale Capacity: 30 Kg connectivity Platform Size: 350 x 250 mm Readability : 1 GM The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying of Sediment Bottle Sampler as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty Sediment Bottle Sampler Bottle Sampler USGS‐DH48 Type The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Bed Load sampler as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty Bed Load sampler Punjab type Sediment Sampler As per IS : 3913‐1966 The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Flow meter as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty Flow meter Venturi meter, variable area meter and orifice plate with flow control valve. Pressure tapping to measure head loss across each meter supplied with manometer board with eight tubes, quick release fitting for easy connection to hydraulics bench with educational Software if available. The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Pitot Tube as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty Pitot Tube Pitot tube with scale to determine the position within water including pressurised water manometer with scale length 500mm Approximate dimensions 1.0m x 0.55m x 0.23m, 1 set of connecting tubes With instruction manual The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Minidisk Infiltrometer as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Minidisk Infiltrometer Total Length: 32.7 cm Diameter of Tube: 3.1 cm Volume of Water Required to Operate: 135 ml Sintered Stainless Steel Disc: 4.5 cm diameter, 3 mm thick Length of Water Reservoir: 21.2 cm Length of Suction Regulation Tube: 10.2 cm. Length of Mariotte Tube: 28 cm Suction Range: 0.5 to 7 cm of suction The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Automatic Soil Compaction Machine Universal Automatic Compactor IS: 2720(Part VII & VIII) Motorised.as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Automatic Soil Compaction Machine Universal Automatic Compactor IS: 2720(Part VII & VIII) Motorised. It is a motor driven mechanical compactor useful for soil compaction into 100mm or 150mm dia moulds. Two sets of rammers are provided, one of 2.6 kg, and arranged for 310mm drop and other 4.9 kg and arranged for 450 mm fall. For Compaction soil into 150 mm dia moulds, 100 mm face dia rammers having weights 2.6 kg and 4.89 kg are used whereas for 100 mm dia moulds they are of 50mm dia. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the soil layer. When the rammer reaches the required height the pawl release the rammer which falls freely on soil surface.

The release mechanism is operated by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm An automatic blow counter fitted to the compactor is used to set the number of blows. The base plate of the specimen mould is to be fitted to the rotating base plate of the instrument which makes 1/5th revolution per stroke. The equipment is suitable for operation 230 volts, 50 cycles, single phase, A.C. supply Moulds are to be Ordered separately.. The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Relative Density Apparatus IS: 2720 (PXIV).as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Relative Density Apparatus IS: 2720 (PXIV). The Equipment consists one each of : Vibratory table, with a cushioned steel vibrating deck about 75 cm x 75cm. It has a frequency of approximately 3600 vibrations per minute under a 115 kg load. Amplitude is variable 0.45mm and 0.45 to 0.65mm. Suitable for operation on 415 volts three phase supply. Cylindrical metal unit weight mould, 3000 ml capacity. Guide Sleeve with clamp assembly. Surcharge base plate for mould. Handle for surcharge base plate Surcharge weight. The total weight together with surcharge base plate and handle is equivalent to 140 kg/sq.cm. For mould Cylindrical metal unit weight mould, 15000ml capacity. Surcharge base plate for guide sleeve. Surcharge weight for cylindrical mould of 15000ml cap. (Total weight together with the above mould & surcharge weight is equivalent to 140 kg/sq.cm.

Dial gauge holder & Calibration bar 75 x300mm x 3mm. Accessories : Dial Gauge 0.01x25mm The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Consolidation Apparatus (three gang) as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Consolidation Apparatus (three gang) Loading Unit, maximum capacity 20 kg/cm²consisting of a loading yoke connected to a lever arm with a counter‐balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. Consolidation cell assembly, fixed ring type for testing 60mm dia x 20mm thick specimens comprising: Fixed ring for specimen 60 mm dia x 20 mm thick with a guide ring. Top porous stone for 60mm dia, specimen. Bottom porous stone for 60 mm dia specimen. Pressure Pad, perforated. Channelled base with water inlet Gasket. Flanged water jacket.

Set of weights to give a pressure of 10 kg/cm2 on 60 mm specimen Comprising : 7 off 0.05 kg/cm2, 5 off 0.1 kg/ cm2, 6 off 0.2 kg/ cm2, 6 off 0.5 kg/ cm2 and 5 off 1.0 kg/ cm2. Water reservoir with plastic tube, T‐Connection and pinch cockConsolidation Apparatus Three gangs complete with gunmetal cell and Dial gauge 0.01mm. The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Laboratory vane shear test Laboratory type Motorized IS: 2720 (P‐XXX) as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Laboratory vane shear test Laboratory type Motorized IS: 2720 (P‐XXX). Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibrated torsion spring, Vane dia, rod dia, vane size & vane height are as per IS specification. The Vane shaft is attached through the hollow upper shaft to resettable pointer, which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factory gives the torque.

A container for soil sample is also supplied, and a sampling tube of 38mm I.D. & 150 mm long can also be used as container 6 kg cm, and 8 kg cm. Complete as above in a wooden carrying case. The rate of rotation is 1/60 R.P.M. Suitable for operation on 230 Volts. The rate is including GST and other charges complete Rate is approved by the Director , RRI.

Supplying & Testing of Direct Shear Apparatus, Multiple reversal type Motorised with 12 speed IS: 2720 (P‐XIII). as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Direct Shear Apparatus, Multiple reversal type Motorised with 12 speed IS: 2720 (P‐XIII). The apparatus comprises of the following : Loading Unit: Supplied with loading yoke with direct and lever system for applying load. Normal stress capacity 8kg/sq.cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing. Halves for a square specimen size 60 x 60 x 25 mm, one pair gripper plate, one pair of perforated shear box housing Accommodates the direct shear box assembly. Complete with two ball roller strips.

Specimen Cutter: For cutting 60x60x25 mm specimen from larger samples. Set of weight to give a normal stress of To give kg/cm.sq. Qty. 0.05 4Nos. 0.1 1 No. 0.5 3 Nos. 1.0 1 No Unit is electrically operated to give the following 12 rates of strains. 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0,002, 0.001, 0.0004 & 0.0002mm/min. The apparatus is suitable for operation on 230 volts single phase A.C. supply. Without dial gauge and proving Ring. Accessories: High sensitivity proving ring, 2 KN capacities fitted with 0.002mm dial gauge with our own calibration certificate in a nice teak wooden case. The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Darcy's Law Apparatus Made in Stainless Steel as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Darcy's Law Apparatus Made in Stainless Steel Test Section: Material Stainless Steel Dia 120 mm approx., Height 500 mm. Water Circulation: FHP Pump,Crompton makes. Flow Measurement: Using Measuring Tank (Capacity 25 Ltrs. (approx.) and Electronic Stop Sump Tank: Capacity 50 Ltrs. Control Panel Comprises of: Standard make On/Off Switches/Starter, Mains Indicator etc. Instruction Manual: An ENGLISH instruction manual will be provided along With the Apparatus Tanks will be made of Stainless Steel. The whole set‐up is well designed and arranged in a good quality painted structure.Instruction Manual consisting of experimental procedures, block diagram etc.

Requirement: Electricity Supply: Single Phase, 220V AC, 50Hz, 5‐15 amp combined socket with earth connection. Water Supply (Initial Fill). Floor Drain required. Floor Area required: 1.5 m x 0.75 m Mercury (Hg) for manometer (250 gm) The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Electric Oven as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Electric Oven High Temperature Convection Oven ‐ Digitally Controlled Double walled inside chamber of S. Steel. Outer Chamber of mild steel heavy gauge duly powder coated. Digitally controlled from 50° C to 300° C ± 1°C. Beaded heating elements are placed in the ribs at the bottom and sides. Complete with Two indicators and on/off switch or fitted with industrial heater fitted on back side of the chamber, Triple walled, with blanket insulation/mineral insulation & Air circulation fan. To operate on 220/230 volts. A.C. Supply. Sizes: 605 x 605 x 605 (24"x24"x24") Cap: 224 Lit. The rate is including GST and other charges complete Rate is approved by the Director , RRI

Supplying & Testing of Hydrometer : IS : 2720 (Part ‐ IV), IS : 3104 as per Direction of Engineer In-Charge with the following specifications & with two years onsite warranty . Hydrometer : IS : 2720 (Part ‐ IV), IS : 3104 Used for grain size analysis of soils where more than 10% of the material will pass through 75 microns I.S. Sieve. Manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is in graved. The scale range is 0.995 to 1.030 density (gms/cc) at 27° C. Smallest division on the scale is 0.0005. With Graduated glass measuring cylinder with spout. The rate is including GST and other charges complete Rate is approved by the Director , RRI