Irrigation And Waterways Department Tender

Supplying of spring type mattress of size 72" x 78" x 8” from renowned manufactures etc. as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing of laminated, decorative solid wooden bed side table of size 18" x 18" x 20” with 2/3 drawers’ storage from renowned manufactures etc. complete as per direction & satisfaction of Engineer-In-Charge

Supplying, fitting and fixing as per layout of Vintage/ Antique look duco finsh machine polished (prefreably white), decorative teak wood's bed side table of size 18" x 18" x 20” with 2 drawers’ storage from renowned manufactures having ISO 9001-14001, complete as per direction & satisfaction of Engineer-In-Charge.

Supplying of Vintage/ Antique looks decorative single-seater wooden couch of size 24” x 24” x 18”, duco finsh machine polished properly covered with upholstery of approved shade and quality along necessary cushioning, fabricated by renowned manufactures having ISO 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing of Vintage/ antique look duco finsh machine polished , decorative teak wood's wardrobe of size 72" x 24" x 84” with hander rail as per design approved, fabricated by from renowned manufactures having ISO 9001-14001. complete as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing of laminated finish decorative solid wooden wardrobe of size 48" x 24" x 84” along with necessary polising as applicable, having hander rail, faricated by renowned manufactures having ISO 9001-14001, complete as per direction & satisfaction of Engineer-In-Charge.

Supplying of Vintage/ Antique look decorative marble top wooden centre/ coffee table with duco finish machine polish, from renowned manufactures having ISO 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing as per layout of Vintage/ Antique look decorative marble top wooden table finished with duco finish machine polishh, for TV unit of size 48” x 24” x 30” from renowned manufactures having ISO 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting & fixing of half height cabinet for TV unit made with ISI 710 grade plywood and laminated finish as per drawing and along with necessary polising as per layout for TV unit of size 48” x 24” x 30” from renowned manufactures having ISO 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing as per layout decorative wooden tea/ coffee table with glass top with (duco finish machine polished surface) of approved shade of size at least 36” x 30” x 24” from renowned manufactures having ISO 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing as per layout single-seater chair of size 24” x 24” x 18” made of approved design and upholstery as per approved shade, from renowned manufactures having Iso 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing as per layout elegant looking, decorative 3-seater wooden sofa with (duco finish machine polished surface) of size at least 78” x 36” x 18” with cushion/fabric/upholstery of approved shade and made as per approved design from renowned manufactures having ISO 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Supplying, fitting and fixing as per layout elegant looking, decorative 2-seater wooden sofa with (duco finish machine polished surface) of size at least 54” x 36” x 18” with cushion/fabric/upholstery of approved shade and made as per approved design from renowned manufactures having ISO 9001-14001, as per direction & satisfaction of Engineer-In-Charge.

Conference table 13 seater of dimension 16' x 5' x 2'6" factory made, machine finished made out of Top 36mm thick MDF one side pre laminate board, . Understructure- The understructure consists of mixture of 18mm and 25mm Thick Pre-laminated twin board and necessary inbuilt tray for provision of fixing cables/switches etc as per design approved by EIC.

Supplying fitting and fixing as per layout 4 seater dinning table as per design of EIC with polishing of approved shade with toughned glass top and chairs of approved design and polish.

Supplying, fitting and fixing of glass cubical made out of 8mm thick toughed glasspanel, door handle with towel rod, door hinges # 304 stainless steel hardware size 2745 mm X 1980mm excluding any civil works for floor preparation as per design approved by EIC

Carpet 6X4 as per approved design

Custom made 63mm thick. F/Ht.Wooden wall panelling made out of Hardwood Frame work/Aluminium Stud framework in 600 x 600 Grid, of finished size 50x50mm. Frame to have vertical member to be anchored to the slab soffit with the help of screws. Frame work to be finished with BWR graded IS 710 Ply wood of 6mm Thick of aproved make and fixed upto the slab soffit. 50mm glasswool of 48kg/Cum density to be infill for sound accoustic, all exposed surfaces of ply to be finished with 1.0mm laminate as per approved shade of the consultant/EIC. Rate to include neccessary hardwares & Adhesives to complete the work. measurement to be done on the basis of visible surface area (LxHt), work to be executed under the direction and approved design of the EIC

OFFICE CHAIR : Technical Specification - AERO High Back Providing, Supplying and installation of ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), BIFMA Level 2&3 (membership), AIOTA, Green guard (by UL) , indoor air quality certified, Indoor Advantage Gold, Indian Design Mark, GRIHA manufacturer, factory made Aero High Back Chair The seat is made up of 1.2 ± 0.1cm thick hot pressed plywood measured as per QA method described in OCP OLTA PL14-18 The Back is made up of injection moulded glass filed nylon & upholstered using Mesh fabric with high tenacity yarn SEAT SIZE(Larger Seat Depth): 47.0 cm (W) x 515 cm. (0)SEAT SIZE(Standard Seat Depth) 470 cm (W) x 49.5 cm. (D) *BACK SIZE: 450 cm. (W) x 65.3 cm (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m² and hardness 16 ± 2 kgf as per 15:7888 for 25% compression ARMRESTS: The adjustable armrest is designed with the following features Up-Down adjustment-8 steps (8 00.5cm range) Height adjustable armrest structure which is Powder Coated & fitted with an armrest top Fixed Armrest Top is PU moulded over metal insert LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 80±05 cm in height FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. 360° revolving type , Single point control Front-pivot for tilt with feet resting on ground ensuring more Tilt tension adjustment 4-position locking with anti-shock feature, Seat/back tilting ratio of 1:26. NECKREST The Neck rest assembly consist of polypropylene pad with moulded polyurethane foam & covered with polyester fabric Neck rest is fed to Back Assembly through Neck rest connector Neck rest assembly has height adjustment of 4.210.6 cm and rotation adjustment of overal 70's 2 The complete neckrest assembly is retro &t to the main chair PNEUMATIC HEIGHT ADJUSTMENT PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-fed Nylon and fitted with 5 nos twin wheel castors. The twin wheel castors are injection moulded in black Nylon along with supplying, fitting and fixing of seat cover of approved make and shade, with supporting product details along with authorization certificate from OEM, as per direction,proposed layout and prior approval of Engineer In Charge.

GYPSUM/ Pre fabricated modular designed channels for designed wall decoration as per approved design with proper fixing and finishing for designed elevation as per direction of EIC

Supplying of Wooden Easel Stand with 4 canvas as per diection of EIC

Decorative roller blinds as per approved design

Custom made Planter Box with 19mm Block Board. (Size: 1200L x 400D x 400Ht) for Accomodating plant pots. All external surfaces to be finished with 1.0mm laminate and eternally with 0.8mm. Edges to be finished with Edge Bnding Tape of matching shade.

Jaquar make shower panel of approved design

Wall hung WC of Jaquar Make of approved design with conclealed cistern and other accessories

Counter top wash basin of Jaquar of approved design

Basin Mixture Jaquar of approved model with bottle trap

Bottle trap Jaquar Make of approved make

Two in one bid cock of approved model of Jaquar

Health faucet of Jaquar of approved model

Concealed Stop cock of Jaquar Make as per approved model

Suplying & Fixing Curtains with lining cloth, fixed on curtain rods of 18mm dia of aluminim grade. Curtains to be fully stitched and prepared to be hanged on the curtan rods via nikel (coated) rings for smooth movement.

Supply, installation, commissioning of IP 2 Mega Piexel Dome night colour VU, Camera Specification- DS-2CD1327G0-L(UF)- CameraImage Sensor 1/2.8" Progressive Scan CMOS, Min. Illumination Color: 0.001 Lux @(F1.0, AGC ON), 0 Lux with white light, Shutter Speed 1/3 s to 1/100, 000 s , Slow Shutter -Yes,Wide Dynamic Range, Digital WDR,Angle Adjustment, Pan: 0° to 360°, tilt: 0° to 75°, rotate: 0° to 360°, Lens Specifiaction Focal Length & FOV 2.8 mm, horizontal FOV 105.2°, vertical FOV 56.5°, diagonal FOV 125.1° 4 mm, horizontal FOV 83.6°, vertical FOV 46.2°, diagonal FOV 97.5°, Lens Mount- M12, Focus-Fixed,Aperture-F1.0, DORI-2.8 mm, D: 44.1 m, O: 17.5 m, R: 8.8 m, I: 4.4 m 4 mm, D: 53.4 m, O: 21.2 m, R: 10.7 m, I: 5.3 m, Safety - UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013, IEC 62368-1:2014); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013, IEC 62368-1:2014); BIS (IS 13252(Part 1):2010+A1:2013+A2:2015) , Environment-CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2006)of approved model of Hikvision/Honeywell/Dlink/Dahua with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.

Supply, installation, commissioning of 16 Channel NVR with specification - DS-7616NI-Q2/16P (D), NVR, Motion Detection 2.0 Human/Vehicle Analysis 4-ch Video and Audio, IP Video Input 16-ch, Incoming Bandwidth 160 Mbps Outgoing Bandwidth 80 Mbps, HDMI Output 1-ch, 4K (4096 x 2160)/30 Hz, 4K (3840 x 2160)/30 Hz, 2K (2560 x 1440)/60 Hz, 1920 x 1080/60 Hz, 1600 x 1200/60 Hz, 1280 x 1024/60 Hz, 1280 x 720/60 Hz, VGA Output 1-ch, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz, Video Output Mode HDMI/VGA simultaneous output, Audio Output 1-ch, RCA (Linear, 1 KΩ) Two-Way Audio 1-ch, RCA (2.0 Vp-p, 1 k Ω),Decoding- Decoding Format H.265+,H.265,H.264+,H.264 Recording Resolution 8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA /720p/VGA/4CIF/DCIF/ 2CIF/CIF/QCIF, Synchronous playback 16-ch Decoding Capability 1-ch@8 MP (30 fps)/3-ch@4 MP (30 fps)/6-ch@1080p (30 fps)*: The length or width of camera resolution (each track) cannot exceed 4096 pixels.Stream Type Video, Video & Audio, Audio Compression G.711ulaw/G.711alaw/G.722/G.726 Network- Remote Connection 32, Network Protocol-TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP,UPnP™, HTTP, HTTPS, Network Interface 1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface, PoE- Interface 16, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power ≤ 150 W, Standard IEEE 802.3 af/at Auxiliary Interface- SATA 2 SATA interfaces, Capacity Up to 8 TB capacity for each disk, Alarm In/Out N/A (4/1 is optional), USB Interface 2 × USB 2.0, Certification- FCC Part 15 Subpart B, ANSI C63.4-2014, CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017 of approved model of Hikvision/Honeywell/Dlink/Dahua with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.

Supply, installation, commissioning of 16 Channel POE 2 uplink, 16-Port 100 Mbps Long-Range Unmanaged PoE Switch DS-3E0318P-EL/M(B) with specifications Network parameters - Port number, 16 × 100 Mbps PoE+ ports, 1 × 1000 Mbps RJ45 port, and 1 × 1000 Mbps SFP fiber optical port Port type - RJ45 port, full duplex, MDI/MDI-X adaptive Standard - IEEE 802.3, IEEE 802.3u, IEEE 802.3x, Forwarding mode Store-and-forward switching Working mode, Standard mode (default); Extend mode - High priority ports, Ports 1 to 8, Ports for long-distance transmission (PoE+) Ports 1 to 16, MAC address table - 4 K, Switching capacity - 7.2 Gbps, Packet forwarding rate - 5.356 Mpps, Internal cache 2.75 Mbits, PoE power supply-PoE standard IEEE 802.3af, IEEE 802.3at PoE power pin - 1-16 support 8-core power supply - PoE+ port Ports 1 to 16 Max. port power 30 W, PoE power budget -130 W, Max. power consumption 150 W, Approval EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 55024: 2010 +A1: 2015); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 6, 2016) Safety UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013) Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2006) of approved model of Hikvision/Tplink/Dlink with supporting product details as per direction and prior approval of Engineer In Charge.

Supply, Installation, commissioning of 4 Channel POE 2 uplink Network Parameters - Ports4 x 10/100Mbps PoE ports, and 2 × 10/100Mbps RJ45 ports, Port TypeRJ45 port, full duplex, MDI/MDI-X adaptive, Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, High Priority Ports Ports 1 to 2, MAC Address Table 2K, Switching Capacity1.2 Gbps, Internal Cache768 Kbits, PoE Power Supply PoE Standard IEEE 802.3af/at PoE standard, PoE Port 4, Max. Port Power30 W, PoE Power Budget35 W, General Dimensions (W × H × D)145 mm × 68.45 mm × 25.6 mm (5.71” × 2.69” × 1.01”),Shell Metal material, fan-free design, Gross Weight0.52 kg (1.15 lb), Net Weight0.27 kg (0.60 lb), Operating Temperature–10 °C to 40 °C (14 °F to 104 °F), Operating Humidity5% - 95%, Storage Temperature–40 °C to 85 °C (–40 °F to 185 °F), Storage Humidity5% - 95%, Power Supply48V 0.8A, Approval-EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 55024: 2010 +A1: 2015); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 6, 2016), Safety UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013) of approved model of Dlink/ Tplink/ Hikvision with supporting product details as per direction and prior approval of Engineer In Charge.

Supply, Installation, commissioning of Surveillance Internal Hard Drive HDD 4TB, Capacity 4TB , Interface SATA 6.0 Gbit/s, Form Factor 3.5-inch, HDWT140UZSVAR, HDWT140UZSVA, Number of Cameras Supported 32, Driver Bays Supported 1 to 8, Rotational Speed [RPM] – 5400, 24x7 Operation – Yes, S300 ,Vibration (Operating) 7.35 m/s_ {0.75G} (5 to 300Hz) 2.45 m/s_ {0.25G} (300 to 500Hz) of approved model of Segate/LG/Western Digital/Toshiba with supporting product details as per direction and prior approval of Engineer In Charge.

Supply, Installation, commissioning of 24" Inch Monitor , Picture Quality Screen Size 60.45cm (23.8), Display Type IPS, Color Gamut (Typ.) NTSC 72% (CIE1931), 24MP450B , Color Depth (Number of Colors)16.7M, Pixel Pitch (mm)0.2745 x 0.2746 mm, Response Time (GTG)5ms (GtG at Faster), Refresh Rate75Hz, Aspect Ratio16:9, Display Resolution FHD, Resolution1920 x 1080, Brightness200cd (Min)/250cd (Typ), Contrast Ratio 600:1 (Min.), 1000:1 (Typ.), Viewing Angle178° (R/L), 178° (U/D), Power Consumption (Typ.)19WPower Consumption (Max.)22W of approved model of SAMSUNG/LG/Hewlett-Packard with supporting product details as per direction and prior approval of Engineer In Charge.

Providing,laying, fixing of Cat6 cable with charateristic impedence 100+- 15 Ω, Mechanical properties as approved, Frequency 250MHz, Transmission Speed 1000 Mbps, NCB-C6UGRYR-100/NCB-C6UGRYR-305 , of approved make of Dlink/Digilink/Finolex with supporting product details as per direction and prior approval of Engineer In Charge.

Supply, Installation, commissioning of 4 U Network Rack, Technical Data: Rack Standard : Conforms to DIN 41494 or equivalent standard, Construction : Welded, Front Door : Lockable Toughened Glass Door, Basic Frame : Steel, Equipment Mounting : DIN Standard Slots, Mounting Angle : 19” Mounting angles made of formed steel, Standard Finish : Powder Coated, Top and Bottom Cover : Welded to Frame, Vented and Field Cable entry exit cut outs, Standard Color : Grey, Static Load : 25 kgs, of approved make of Dlink/CP Plus/Hikvision with supporting product details as per direction and prior approval of Engineer In Charge.

Supply, installation, commissioning of IP Bullet Camera DS-2CD1027G2-L(UF) 2 MP ColorVu MD 2.0 Fixed Bullet Network Camera Image Sensor 1/2.8" Progressive Scan CMOS Max. Resolution 1920 × 1080 Min. Illumination Color: 0.001 Lux @ (F1.0, AGC ON),0 Lux with light Shutter Time 1/3 s to 1/100,000 s Day & Night, 24/7 color imaging, Angle Adjustment Pan: 0° to 360°,tilt: 0° to 90°,rotate: 0° to 360°, Lens, Lens Type Fixed focal lens, 2.8 and 4 mm optional, Focal Length & FOV 2.8 mm, horizontal FOV: 106°, vertical FOV: 57°, diagonal FOV: 126° 4 mm, horizontal FOV: 83°, vertical FOV: 44°, diagonal FOV: 99°, Lens Mount M12, Iris Type, Fixed Aperture F1.0 ,Video Compression Main stream: H.265+/H.265/H.264+/H.264, Sub-stream: H.265/H.264/MJPEG, Video Bit Rate - 32 Kbps to 8 Mbps Approval- EMC FCC: 47 CFR Part 15, Subpart B, CE-EMC: EN 55032: 2015, EN 61000-3-2:2019, EN 61000-3-3: 2013+A1:2019, EN 50130-4: 2011 +A1: 2014, RCM: AS/NZS CISPR 32: 2015, KC: KN32: 2015, KN35: 2015, Safety UL: UL 62368-1, CB: IEC 62368-1: 2014+A11, CE-LVD: EN 62368-1: 2014/A11: 2017, BIS: IS 13252 (Part 1): 2010/IEC 60950-1: 2005, Environment CE-RoHS: 2011/65/EU, WEEE: 2012/19/EU, Reach: Regulation (EC) No 1907/2006, Protection IP67: IEC 60529-2013 of approved model of Hikvision/Honeywell/Dlink/Dahua with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.

CONDUIT & CASING of standard approved make as per direction of Engineer In Charge

Supply of 43" 4K FHD Display LG Make with wall mounting kit as per with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge. Specifications

Supply of wired Gooseneck Microphone with Desktop base unit and on/off switch as per specifications of (PeopleLink) with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.

Supply of 8x8 Network Digital Signal Processor With AEC and POTS telephone network etc as per specifications of (PeopleLink) with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.

Supply of 8 port analog Audio Input Expander, standard terminal block connectors, DIP switches etc as per spedifications of (PeopleLink) with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.

Supply of Two Way 6.5" wall speaker as per specifications of (PeopleLink) with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.

Supply of Constant Beam width Technology Line Array Column Loudspeaker as per specifications (PeopleLink)

Supply of two-channel, 300 w @ 4ohms Analogue Power Amplifier as per specifications. (PeopleLink)

Supply of 75" 4K FHD Commercial Display with wall mounting kit as per with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge. Specifications (PeopleLink)

Supply of flip-open cover cable cubby as per specifications

Supply of 4x14 K60 Presentation switcher as per specifications of AIR Media

Supply of 4K Ultra HD extender (Transmitter) as per specifications

Supply of 4K Ultra HD extender (Receiver) as per specifications

Supply of high speed HDMI Cables, speaker cables, shielded microphone cables, all types of necessary connectors etc including 12U networking rack with accessories all complete.

Supply of 4K Conference Cam with necessary cable, stand as per specifications

Supply of Laptop suitable for video conferencing having configuration Intel core i3 @13th gen or higher, 16 gb ram, 500 gb ssd, 15.6", Win 11 Prof, carry bag,windows 11 professional,3 years warranty, antivirus as per specifications.

Installation, Testing & Commissioning of all equipments (from sl. No. 46 to 60 ) to the satisfaction of the Engineer-in-charge.