Irrigation And Water Resources Department Tender

Supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter. (Dia. to be measured at mid length).

Driving bamboo pins in standing or flowing water including scaffolding and driving appliances. (a) Where boats are not necessary.

Supplying at site geotextile bags of size 1.00 m x 0.70 m using UV stabilized needle punched polypropylene non-woven geotextile of 300 gsm as per specification, double stitched at two ends with polypropylene or equivalent yarn including cost of transportation by all means and other incidental charges complete. Note: Payment will be made subject to the result of 3rd Party Testing, to be done by the Engineer-in-charge departmentally. Paragraphs 2.7.5, 2.7.7, 2.7.8, 2.7.9 and 2.7.10 under the Chapter of “Specification for Works” in the USoR shall be reproduced and included in the tender document as “Specification and Special Terms & Conditions for Geotextile Bags” in case of use of this item in the estimate

Labour charges for filling Geo-textile bags with filler materials(earth/sand), machine stitching the open end of the bag with thread asper design and placing the same on slope or dumping from bankwithin initial lead of 150m and all lifts including carriage and hirecharges of all materials and equipments but excluding the cost of fillermaterials as directed by the Engineer-in-Charge i) Bag size 1.00m x 0.70m of capacity 0.1325 cum/bag

Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land, including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same on embankments, clannels, filling depressions in requisite profile, levelling as per direction ofthe Engineer-in-charge. NB : Measurement to be taken on the basis of stack measurement/prepost work section measurement after deduction of void as per norms. No extra payment will be made for stacking. The rate is inclusive for compensation for earth for land owned and arranged by the contractor add Rs. 25.00 per cum extra over rate of E/W for land owned /arranged by the Department . Royalty charges on earth @ Rs. 29.00 per cum & cesses charges @ Rs. 5.30 per cum (i.e., Rs. 15.00 per 100 cft.), as per Govt. notification , which will be paid on production of necessary documents in support of payment made towrds the royalties & Cesses. (B) Beyond 500 metre and upto 1.00 km.

Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile..

Extra rate over Item Nos.9for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30metres. (iii) From 180 Metre to210 Metre

Supplying at site and laying in position UV stabilized polypropylene wovengeotextileof430gsmas filter, as per specification, includingcost of preparing the bed, placing the geotextile as per profile with at least 15cm lapping, wherever required and anchorage at top, sewing / welding the overlapped portion, storage and transportation by all means, complete as per direction of the Engineer-in-charge. Note: 1. Payment to be made on measurement of finished surface without lapping, but including anchoring length at top. 2. Payment will be made subject to the result of 3rd Party Testing, to be done by the Engineer-in-charge departmentally. Paragraphs 2.7.7, 2.7.9 and 2.7.10 under the Chapter of “Specification for Works” in the USoR shall be reproduced and included in the tender document as “Specification & Special Terms & Conditions for Geotextile” in case of use of this item in the estimate. 3. This particular item is to be used in special cases, either in continuation of previous usage or after offering adequate justification from techno-economical angles