Indianoil Petronas Private Limited Tender

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc.upto area 3 sq. metres complete and stacking within premises.

Centering and shuttering including strutting, propping etc. and removal of form work for casting of roof slab.

Providing, Bending, binding and laying in position, reinforcement as per drawings at all elevations including removal of scales, dust, grease etc. and rendering of surface, placing concrete cover blocks, chair supports etc. complete with preparation of bar bending schedules and obtaining approval for the same (only approved laps, chairs and spacer bars shall be payable). ribbed tor steel or equivalent IS 1786.

Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil.

125mm thk. Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure

Providing, mixing, and laying cement-sand plaster(1:4) to masonry and concrete surfaces at all elevations including curing and necessary scaffolding, making grooves, drip Moulds etc. complete as per specification and as per direction of engineer-in-charge.12mm thick

Supplying, fitting, and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD – 1785 for Drainpipe complete as per standard design.75mm diameter PVC Rain water pipe

Providing and fixing glazing in aluminum door, window,ventilator shutters, and partitions etc with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm). with EPDM rubber/neoprene gasket etc. complete as per the directions of mengineer-in-charge.

Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer (fixed to steel windows by welding) all complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats in inside wall.

Dismantling granite slabs / granite tiles / marble slab on wall, floor, pump Island etc., stacking of the serviceable materials and disposal of damaged materials as directed by IOCL including all charges etc. complete

Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.

Electrical fittings & fixtures

REST ROOM TOILET UPLIFT WORK

Dismantling of floor tiles upto 50 mm. thick by carefully chiselling without damaging thebase and removing rubbish as directed by IPPL.

Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH

Providing, mixing, and laying cement-sand plaster(1:4) to masonry and concrete surfaces at all elevations including curing and necessary scaffolding, making grooves, drip Moulds etc. complete as per specification and as per direction of engineer-in-charge.12mm thick

Providing Neat cement punning

Supplying of Local sand filling within the grading zone IV of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete

Providing and laying in position cement concrete of M15 grade concrete having ratio of 1:2:4(1 Cement: 2 Coarse Sand :4 Graded stone aggregate of 20mm) excluding cost of centering & shuttering. All work up to plinth level

Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats in inside and outside wall

Fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing & fixing steel mug with chain.

Providing and fixing W.C, push cock, urinal connector pipe, common header from W.C and other misc. toilet fittings of approved quality and colour.

Providing and fixing factory-made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed

NEW SHED STRUCTURE AT GATE 07 CANTEEN ROOF

Providing & fixing of 12 mm dia 100 mm length anchor bolt made up of approved quality by chemical anchoring as directed by Engg. In charge.

Providing and laying in position cement concrete of M15 grade concrete having ratio of 1:2:4(1 Cement: 2 Coarse Sand :4 Graded stone aggregate of 20mm) excluding cost of centering & shuttering. All work up to plinth level

Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH

Providing, mixing, and laying cement-sand plaster to masonry and concrete surfaces at all elevations including curing and necessary scaffolding, making grooves, drip Moulds etc. complete as per specification and as per direction of engineer-in-charge.12mm thick

Structural steel work in built up sections/ framed work in frames(ISMC 100*50*6), guard bar, ladder, railings, brackets, gates and similar works including cutting, hoisting, fixing in position &applying a priming coat of approved steel primer etc. as required.

Sandblasting with one coat of inorganic zinc silicate of 75 micron DFT Structural painting with 1 coats of MIO of 75 micron DFT with 2 coats of Smoke gray paint of 30-35 micron DFT per coat Berger make as per specifications and fixing charges of Y- angle inserting if needed for Fire water pump house roof steel structure & inner boundary wall Y- angle & others area inside terminal

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats

Supply of colour coated trapezoidal “LYSAGHT TRIMDEK 1015” profile sheet of 1072 mm supply width nominal 28 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm center-to-Centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), 0.50 mm Total Coated Thickness (TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminums-Zinc alloy (55% Aluminums, 43.5% Zinc and 1.5% Silicon) as per AS 1397 – Zincalume® AZ150 (Min. 150 gms/sq.mt total on both sides) with Color bond® steel quality XRW paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority.

Providing & fixing at all height FALSE CEILING including providing & fixing of frame work made of special sections power pressed from M.S. sheets and galvanised with zinc coating 120gsm/sqm as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts ,other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length, and with nut and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x 0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the perimeter channels 0.5mm thick 27mm high having flanges of 20mm & 3012.5mm thick tapered edge fire resistant GYPSUM BOARD conforming to IS:2095- PART-I:2011 (board with BIS Certification marks)mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450mm centre to centre with 25 mm long drive-all screws @ 230mm interval including jointing & fixing of gypsum board of ceiling section & perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm centre to centre including jointing and finishing to a flush finish of tapered & square edges of the board with recommended jointing compound.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . With float glass panes of 6.0 mm thickness

Laying of dismantled granite slab / granite tiles / marble slab over pump Island, wall, floor etc. including bedding in cement mortar 1:4, 20mm / 12 mm thick as per standard drawings and cost of all material and labour etc., complete.

Electrification

Total in Figures

Add GST@18%