Indianoil Petronas Private Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Indianoil Petronas Private Limited - IPPL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date10 Aug 2024
Closing Date28 Aug 2024
Tender AmountRefer Documents
Costs
EMD
₹ 98,024Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Annual Rate Contract For Civil Revenue Work For Ippl
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IPPL_204333_1Bid Award Id
ViewTender No
IPPL/HAL/REV/CIVIL/LT-04/24-25Tender Authority
Indianoil Petronas Private Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m
10
2276
227.6
Supply & filling of local earth (including royalty) by mechanical transport also including ramming & watering of the earth in layers not exceeding 20cm in depth in plot, trenches, plinth, sides of foundations etc. complete
40
29160
729.01
Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete.
-
-
-
i) Local Fine Sand within grading zone IV
25
39328
1573.13
ii) Local Coarse Sand within grading zone II/III
10
21969
2196.99
Supply & backfilling with 75mm thick murrum for brick/stone pitching or under driveway in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming,watering and dressing complete
300
22971
76.57
Carriage charge for disposal of earth by mechanical means, including loading, transporting, stacking, unloading to approved municipal dumping ground / unobjectionable place as per direction of Engineer- in-Charge beyond IOCL Premises for all leads and including all lifts.
-
-
-
i) Distance upto 1 km
400
62624
156.56
ii) Distance 1 km 3 km
100
19993
199.93
iii) Distance 3 km 5 km
100
24090
240.9
Centering and shuttering including strutting, propping etc. and removal of form work for:
-
-
-
i) Distance upto 1 km
400
118064
295.16
i) Distance upto 1 km
100
63135
631.35
Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying & curing, excluding the cost of centering, shuttering finishing including cost of curing, admixtures in recommended proportions as per IS:9109 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge, ALL WORKS UPTO PLINTH LEVEL. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable.
-
-
-
i) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum
10
81866
8186.65
ii) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)
10
80421
8042.1
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm
10
94626
9462.6
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
15
119963
7997.55
Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels
-
-
-
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
1000
86530
86.53
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
1000
267280
267.28
250 mm Thk. Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in Sub-Structure & Superstructure
10
80918
8091.84
250mm Thk. Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure in all shapes & sizesin Sub-Structure & Superstructure
10
78651
7865.13
Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:3 (1 cement : 3 coarse sand) IN FOUNDATION AND PLINTH
40
33085
827.13
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
i) Raj Nagar Plain white marble or Udaipur green marble or Zebra black marble or Cuddapa stone having Area of slab upto 0.50 sqm
6
17267
2877.9
ii) Raj Nagar Plain white marble or Udaipur green marble or Zebra black marble having Area of slab over 0.50 sqm
6
15870
2645.02
iii) Granite of any colour and shade having Area of slab upto 0.50 sqm
6
26219
4369.97
iv) Granite of any colour and shade having Area of slab over 0.50 sqm
10
41526
4152.67
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters & similar location in marble/Granite/stone work including necessary holes for pillar taps etc.including rubbing and polishing of cut edges etc.complete
5
3805
761.13
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters & similar location in marble/Granite/stone work including necessary holes for pillar taps etc.including rubbing and polishing of cut edges etc.complete
20
7626
381.32
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters & similar location in marble/Granite/stone work including necessary holes for pillar taps etc.including rubbing and polishing of cut edges etc.complete
6
23800
3966.73
Providing and fixing panelling or panelling and glazing in panelled or panelled & glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
ii) 12mm thick particle board with Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, Grade I
8
14000
1750.01
iii) 12mm Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked.
8
15008
1876.06
Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.including priming coat with approved steel primer (fixed to steel windows by welding) all complete.
300
51384
171.28
Providing & fixing IS:12817 marked stainless steel butt hinges (heavy weight) 100x60x2.50 mm with stainless steel screws etc. complete :
15
1201
80.1
Providing & fixing chrome plated brass100mm mortise latch with one dead bolt with 6 levers & a pair of lever handles with necessary screws etc. complete (best make of approved quality).
15
10663
710.87
Providing and fixing 150 mm bright finished chrome plated brass hanging type floor door stopper with rubber cushion necessary brass screws, etc. complete. to suit shutter thickness complete
15
3613
240.91
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
15
13236
882.42
Providing & fixing chromium plated brass 100mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality).
15
12534
835.62
Providing & fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality).
15
13157
877.19
Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of :
-
-
-
i) Size 50
15
4215
281.06
ii) Size 75
15
5255
350.39
Providing & fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.
15
1889
125.99
Providing & fixing chromium plated brass handles with necessary screws etc. complete:
-
-
-
i) 125 mm
5
1171
234.28
ii) 100 mm
5
1030
206.05
iii) 75 mm
5
926
185.22
Providing & fixing chromium plated brass casement stays(straight peg type) with necessary screws etc. complete
-
-
-
i) 300 mm weighing not less than 330 gms
10
2145
214.54
ii) 250 mm weighing not less than 280 gms
10
1868
186.82
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts & screws etc. complete:
-
-
-
i) 300x16 mm
20
5329
266.46
ii) 250x16 mm
20
4801
240.09
Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
i) 250x10 mm
20
2146
107.3
ii) 200x10 mm
20
1865
93.25
Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
i) 125 mm
20
1236
61.8
ii) 100 mm
20
1095
54.76
iii) 75 mm
20
951
47.56
Providing & fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod.
20
2887
144.38
Providing & fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc.complete (Best make of approved quality.
-
-
-
i) Triple strip vertical type
10
404
40.46
ii) Double strip (horizontal type)
10
321
32.18
Providing & fixing partition upto ceiling height consisting of G.I. frame & required board including providing & fixing of frame work made of special section power pressed/ roll form GI sheet with zinc coating 120gm/sqm(both side inclusive) consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm & 0.50mm thick fixed to the floor & ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with Zinc Coating of 120gm/sqm (both sides inclusive) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mmx 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete
-
-
-
i) 75 mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3:1996 (Board With BIS Certification Marks).
15
27062
1804.15
ii) 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part-I:2011 (Board With BIS Certification Marks).
10
15684
1568.47
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately)
-
-
-
i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections
10
4728
472.81
ii) Fixed glazing with Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) sections
15
7222
481.52
iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
10
5661
566.12
iv) For shutters of doors, windows & ventilators with Polyester Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
15
8625
575.03
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
20
20715
1035.77
ii) With float glass panes of 5.0 mm thickness (weight not less than 12.5kg/sqm)
15
20149
1343.3
iii) With float glass panes of 8.0 mm thickness (weight not less than 20kg/sqm)
10
15152
1515.26
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
i) With stainless steel cover plate
10
24998
2499.8
ii) With brass cover plate
10
26661
2666.16
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.
-
-
-
i) Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
10
6031
603.12
ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)
15
9548
636.58
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per direction of Engineer in Charge complete Upto 5mm depth and 5mm width
10
823
82.32
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
i) Powder coated minimum thickness 50 micron aluminium tubular handle bar
10
5829
582.96
ii) Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar
10
5965
596.53
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
10
4751
475.15
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).
10
46088
4608.87
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
350
31206
89.16
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
300
31629
105.43
Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete.
-
-
-
i) Hot finished welded type tubes
100
14864
148.64
ii) Hot finished seamless type tubes
100
16320
163.2
Providing & fixing hand rail of approved size, welding etc. to steel ladder railing,balcony railing & staircase railing and similar works including applying priming coat of approved steel primer.
-
-
-
i) M.S. tube
250
37727
150.91
iii) G.I. pipes
250
40927
163.71
Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer etc. as required.
400
54300
135.75
Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.
50
53379
1067.58
Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete.
50
48022
960.45
Providing & fixing hand rail of approved size, welding etc. to steel ladder railing,balcony railing & staircase railing and similar works including applying priming coat of approved steel primer.
-
-
-
i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4
50
77742
1554.85
Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at 17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete.
100
13056
130.56
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
i) 75 mm diameter
80
16670
208.38
ii) 110 mm diameter
80
25287
316.09
iii) 160 mm diameter PVC Rain water pipe
60
50260
837.67
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
i) 75mm Coupler
20
1613
80.66
ii) 110mm Coupler
20
2441
122.07
iii) 75 mm Single pushfit Coupler
20
1613
80.66
iv) 110 mm Single pushfit Coupler
20
2247
112.38
v) Single tee with door of 75x75x75 mm
20
2898
144.91
vi) Single tee with door of 110x110x110 mm
20
4213
210.66
vii) Single tee without door of 75x75x75 mm
20
2537
126.88
viii) Single tee without door of110x110x110 mm
20
3907
195.37
ix) 87.5° Bend of 75 mm
20
1863
93.15
x) 87.5° Bend of 110 mm
20
2691
134.55
xi) Shoe (Plain) of 75 mm
20
1641
82.08
xii) Shoe (Plain) of 110 mm
20
2358
117.91
Providing & fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work & fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
i) 75 mm
15
4509
300.66
ii) 110 mm
15
4488
299.25
Providing & fixing at all height FALSE CEILING including providing & fixing of frame work made of special sections power pressed from M.S. sheets and galvanised with zinc coating 120gsm/sqm as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts ,other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length, and with nut and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x 0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the perimeter channels 0.5mm thick 27mm high having flanges of 20mm & 30mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450mm centre to centre with 25 mm long drive-all screws @ 230mm interval including jointing & fixing of gypsum board of ceiling section & perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm centre to centre including jointing and finishing to a flush finish of tapered & square edges of the board with recommended jointing compoud. Jointing tapes, finishing with jointing compoud in 3 layers covering upto 150 mm on both sides of joint & 2 coats of primer suitable for board, all as per manufacturer specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, complete as per drawing & specification and direction of the Engineer in Charge but excluding the cost of painting with:
-
-
-
i) 12.5mm thick tapered edge fire resistant GYPSUM BOARD conforming to IS:2095- PART-I:2011 (board with BIS Certification marks)
40
46324
1158.1
ii) 12.5mm thick tapered edge moisture resistant GYPSUM BOARD CONFORMING TO IS: 2095- PART-I
20
26655
1332.75
Providing & Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent) of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet, spaced 1200mm centre to centre, and cross "T" of size 24x28mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main'T' at 600mm centre to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24 x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600mm panel to from grid of size 600x600mm resting on periphery walls / partitions on Perimeter wall angle pre- coated steel of size(24x24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture (Spintone/Cosmos/hexa) in the grid including,cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required, Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm spaced at 1200mm centre to centre along main'T', bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint for all heights,as per specifications,drawings & as directed by engineer-in- charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames /opening (cut outs) having area less than 0.30 sqm.The calcium silicate tile shall have NRC value of 0.50(Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance & also having thermal conductivity0.043 w/mK
30
51103
1703.44
Supplying & fixing of 18 gauge GI plain sheet of approved make with necessary folding/ fabrication using hydraulic press for flashing sheet / fascia, etc. in roofing / buildings / sheds etc. including all necessary fixtures etc., complete
10
39753
3975.38
Providing and laying cement plaster on surfaces with fine or coarse sand including curing etc.
-
-
-
i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
2000
553000
276.5
ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
1500
395175
263.45
iii) 15mm Cement plaster of mix 1:4 (1 cement: 4 fine sand) on rough side of half or single brick wall
100
31904
319.04
iv) 15mm Cement plaster of mix 1:6 (1 cement: 6 fine sand) on rough side of half or single brick wall
100
30345
303.45
v) 20mm Cement plaster of mix 1:4 (1 cement: 4 fine sand)
80
30277
378.47
vi) 20mm Cement plaster of mix 1:6 (1 cement: 6 fine sand)
100
35816
358.16
Vii) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)
100
23558
235.58
Providing Neat cement punning
500
32510
65.02
Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster.
400
34716
86.79
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
150
30571
203.81
White washing with 3 or more coats of lime to give an even shade
1000
29590
29.59
Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade with 2 or more coats including water thinnable priming coat with cement primer
200
31800
159
Distempering with 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50gm/ltr of approved manufacturer, of required shade and colour complete as per manufacturer's specification with 2 or more coats
200
18062
90.31
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
250
15542
62.17
Finishing walls with water proofing cement paint of required shade with Two or more coats applied @ 3.84 kg/10 sqm:
200
18910
94.55
Finishing walls with textured exterior paint of required shade (2 or more coats applied @ 3.28 ltr/10 sqm, over and including priming coat of exterior Primer applied @ 2.20kg/10 sqm)
200
48080
240.4
Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm)
250
42665
170.66
Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
250
36837
147.35
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture
500
65175
130.35
Applying priming coat With ready mixed pink or Grey primer of approved brand & manufacture on wood work (hard & soft wood)
250
14780
59.12
Finishing with Epoxy paint, 2 or more coats at all locations on steel work prepared & applied as per manufacturer's specifications including appropriate priming coat,preparation of surface, etc.
150
29493
196.62
Finishing with Epoxy paint, 2 or more coats at all location on concrete work prepared & applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.
100
19625
196.25
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats
100
13330
133.3
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
250
45890
183.56
Painting with aluminium paint of approved brand and manufacture to give an even shade with 2 or more coats
250
29077
116.31
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade with 2or more coats
150
16483
109.89
Varnishing with varnish of approved brand and manufacture with Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish.
100
18900
189
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish at desired place or outside the premises as desired as per direction of Engineer in charge.
-
-
-
i) With cement mortar 1:4(1 Cement : 4 fine sand)
100
43292
432.92
ii) With cement mortar 1:4(1 Cement : 4 coarse sand)
100
44514
445.14
Demolishing cement concrete manually/ by mechanical means including disposal of material outside premises at an unobjectionable place as per direction of Engineer-in-charge.
-
-
-
i) 1:3:6 or richer mix (i/c equivalent design mix)
15
27004
1800.33
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable material outside site to an unobjectionable place as/ direction of Engineer-in-charge
30
78792
2626.43
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.
50
44730
894.6
Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge
20
30461
1523.08
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within premises
-
-
-
i) Of area 3 sq. metres and below
5
1422
284.43
ii) Of area beyond 3 sq. metres
10
3892
389.24
Dismantling Steel work in single sections including dismembering and stacking within premises
-
-
-
ii) Channels, angles, tees and flats etc
2500
4425
1.77
Dismantling Steel work in built up sections in angles, tees, flats channels etc. including all gusset plates, bolts nuts, cutting rivets welding etc. including dismembering and stacking within premises
2000
8600
4.3
Dismantling roofing including ridges, hips valleys & gutters, False ceiling of any type and stacking the material within premises, of:
-
-
-
i) G.S. Sheet/ Klippon galvalume sheet/ False ceiling panels/Tata Blue Scope
200
25264
126.32
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within premises.
1500
40800
27.2
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within premises.
-
-
-
i) Thickness up to 40 mm
20
4319
215.95
ii) Thickness above 40 mm up to 75 mm
25
8088
323.54
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within premises.
-
-
-
ii) Bituminous road
50
15887
317.75
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within premises
8000
323280
40.41
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within premises lead as directed by Engineer-in-charge.
200
8704
43.52
Carriage charge for disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, stacking, unloading to approved municipal dumping ground/unobjectionable place as/direction of Engg- in-Charge beyond IOCL Premises for all leads and including all lifts
-
-
-
i) Distance upto 1 km
350
43841
125.26
ii) Distance 1 km 3 km
350
55979
159.94
iii) Distance 3 km 5 km
350
67452
192.72
Dismantling granite slabs / granite tiles / marble slab on wall, floor, pump Island etc., stacking of the serviceable materials and disposal of damaged materials as directed by IOCL including all charges etc. complete
20
5968
298.4
Removal of RCC Trench Covers of size 600MM X 450MM, 75mm to 90mm thick and sand from existing trench, stacking the serviceable materials and disposal of damaged materials as directed by IOCL including all charges etc. complete
40
2148
53.72
Dismantling of Concrete Kerb Stones
100
17426
174.26
Relaying of dismantled kerb stones
100
20887
208.87
Providing & laying design mix cement concrete of M-30 grade, in roads/ driveways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as/approved & specified design criteria,providing dowel bars with sleeve/ tie bars wherever reqd,laying at site,spreading & compacting,mechanically by using needle & surface vibrators, vacuum dewatering, leveling to required slope /camber finishing with required texture, including steel form work with sturdy MS.channel sections, curing, making provision for contraction/expansion, construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants,complete all as/direction of Engineer- in-Charge (Item of Joint fillers, sealants, Dowel bar with sleeve / tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable
-
-
-
i) Cement concrete prepared with batch mixing machine
5
45345
9069.07
Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately)
-
-
-
ii) M40 grade 80 mm thick reflective type Lacquered finish
100
123517
1235.17
iii) M40 grade 100 mm thick reflective type Lacquered finish
40
51040
1276.01
Taking out existing CC interlocking paver blocks from footpath central verge, including removal of rubbish etc., disposal of unserviceable material out of site at unobjectionable place and stacking serviceable material within premises as per direction of Engineer - in-Charge
140
13643
97.45
Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
5
28088
5617.69
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) W.C. pan with ISI marked white solid plastic seat and lid
5
34634
6926.91
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern
5
25812
5162.55
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
i) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
5
48496
9699.33
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
5
14749
2949.92
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan)with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.
2
20773
10386.64
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
-
-
-
i) 25 mm nominal outer dia Pipes
50
19128
382.56
ii) 32 mm nominal outer dia Pipes
50
24897
497.94
iii) 40 mm nominal outer dia Pipes
50
33603
672.07
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
15
9427
628.5
Providing and fixing brass bib cock of approved quality :
-
-
-
i) 15 mm nominal bore
15
4702
313.49
ii) 20 mm nominal bore
15
5073
338.26
Providing and fixing brass stop cock of approved quality :
-
-
-
i) 15 mm nominal bore
15
4702
313.49
ii) 20 mm nominal bore
15
5073
338.26
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
i) 25 mm nominal bore
10
5151
515.14
ii) 32 mm nominal bore.
10
6022
602.28
iii) 40 mm nominal bore
10
7029
702.95
iv) 50 mm nominal bore
10
9006
900.66
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
i) 15 mm nominal bore
10
3509
350.96
ii) 20 mm nominal bore
10
4003
400.38
iii) 25 mm nominal bore
10
4082
408.25
Providing & fixing in position pre-cast R.C.C. manhole cover & frame of reqd. shape & approved quality(Light/medium/heavy/extra heavy duty)
-
-
-
i) L D- 2.5,Rectangular shape 600x450mm internal dimensions
10
12733
1273.36
ii) L D- 2.5,Square shape 450mm internal dimensions
10
10644
1064.43
Providing and fixing 700mm wide rain water gutter fabricated out of 1200mm wide Roll of 18 Gauge Aluminium sheets including MS clamp supports, fittings, fasteners etc. complete as per drawing . (NO joints shall be provided in the gutter and the same has to be fabricated from a continuous roll of Aluminium sheet)
60
64766
1079.44
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25,of size1000x450x50mm, reinforced with 8mm dia four nos longitudinal & 9nos cross sectional T.M.T.hoop bars,including providing 50mm dia perforations @100 to125 mm c/c, including providing edge binding with M.S. flats of size 50mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
10
12546
1254.65
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)
50
36562
731.24
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'X' shaped placed 3.00 m apart and with 5 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) /Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
1500
550275
366.85
Wall painting with minor repair of External boundary wall the job includes through cleaning of surface including cleaning of loose paint/algae/plants etc. minor repair of cement plaster of the surface, surface imperfection such as small holes, dent and surface cracks etc. are to be filled and finished with Asian paint wall putty(X3) or mortar of white cement and fine sand in ratio 1:3, application of 1 coat of Asian paint Exterior wall primer (X2) by brush upon dilution with water having dilution volume of 90-100% Application of two coat Asian Paint Apex Ultima Suprema by brush upon dilution with water having dilution percentage by volume of maximum 40%. Civil repairing of minor nature as per Requirement as instructed by IPPL Engineering-in-charge.
8000
1012000
126.5
Supply of colour coated trapezoidal “LYSAGHT TRIMDEK 1015” profile sheet of 1072 mm supply width nominal 28 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm center-to-Centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), 0.50 mm Total Coated Thickness (TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc and 1.5% Silicon) as per AS 1397 – Zincalume® AZ150 (Min. 150 gms/sq.mt total on both sides) with Colour bond® steel quality XRW paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority.
30
25875
862.5
Removal of all rust materials, cleaning of corroded reinforcement by wire brush, then clean with air blower/water jet & finally Clean by rust removing agent with Sika® Rustoff 100/ Fosroc Reebaklens RR or equivalent as per technical specification, as per manufacturer’s recommendation and as per the direction of Engineer-in-Charge. The rate inclusive of labours, materials, tools & tackles, all complete. (including scaffolding)
200
5060
25.3
Surface cleaning, application of Zinc rich epoxy-based primer coat Friazinc®R / Fosroc Nitozinc Primer or equivalent on steel surface, 2 coats shall be applied as per manufacturer’s recommendation and as per technical specification and as per the direction of Engineer-in-Charge, including labour, materials, tools, tackles, all complete. (Including scaffolding)
120
27600
230
Supply and apply cementitious repair mortar upto 25mm thk. Renderoc SP 40 or equivalent shall be applied as per manufacturers recommendation and as per technical specification and as per the direction of Engineer-in-Charge, including labour, materials, tools, tackles, all complete. (Including scaffolding)
400
287500
718.75
Epoxy bonding agent Nitobond EP Std./Sika Dur32 of new concrete to old concrete: Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). Note: Applicable only when the full diameter of reinforcement steel is exposed.
120
71346
594.55
Supply, mixing and placement of ready to use non-shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4/Renderoc UW or equivalent of 50 mm thickness as per specification and recommendation of manufacturer & as per the direction of engineer in charge. The rate inclusive shuttering and all sorts of material, labours, tools & tackles complete (including scaffolding)
5
211600
42320
Buildup, sealing the surface by application of 2 component epoxy resin based concrete pour filling material Sikadur®PF as per manufacturer’s recommendation [Consumption of Sikadur®PF @ 2.00 Kg/M2] or Fosroc make Nitomortar FC or equivalent After drying, grind the surface thoroughly by surface grinder or by emery paper. Clean the surface by Air
200
48300
241.5
Surface cleaning by using air blower as per technical specification & application of Sika® Ferrogard®-903 or Fosroc make Nitoprime 320PU/Dekguard EP302 or equivalent by suitable means as Per manufacturer’s recommendation and as per the direction of Engineer-in-Charge. The rate inclusive of labours, materials, tools &tackles, all complete. (Including scaffolding)
200
30360
151.8
Surface preparation by mechanically or manually, cleaning, application of two coats of UV resistance protective coating based on us resin Sikagard® PU(UR) /Dekguard PU or equivalent on external concrete Surface as per manufacturer’s recommendation and technical specification and as per the direction of Engineer-in-Charge, including labour, materials, tools, tackles, curing all complete. (Including scaffolding)
200
21160
105.8
Concrete will be lay in prepared bad surface minimum thick 100mm and proper system will be applied of VDF and spreading the non-metallic floor hardener sika chapdur hardener in top surface minimum 4-6 kg per M2 then use the mechanical floater and towel for fine hard finish of the concrete toping.
200
48300
241.5
GST @ 18%
1
1495282
1495282.95
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements