Indian Institute Of Science Education And Research Tender

Fixing of abve Street light fitting of 70-72 watt including connection with pole junction box , testing complete all as specified and as directed by Engineer-in-Charge. Note : (i)Connection cable from pole Juction box to street light and street light bracket shall be measured and paid seperately under respective items. (ii)Quoted rate should be inclusive of taking down existing fitting SV/MH Street light, security light fittings (any type and any size), LED light any type, through ladder mounted on any type of poles/bldgs (up to 6 mtr height) from bracket along with connecting supply cable for power up of fittings all as specified and directed by Engineer in charge.

FOUNDATION OF POLE Foundation with RCC(Gr.M20,PCC(1:3:6),12mm dia rod of size 500 mmx 500 mm x 1200 mm depth in ground with help of 4 Nos Foundation Bolt 24 mm Dia 750 Long hot dipped "L" Shaped duly finished with cement plaster, type bolt as per approved drawing. with Pole earthing by 25X6 mm 600 mm long GI Strip gruoting Ordinary Portland Cement Grade 43: Ultratek, Birla, ACC, Ambuja TMT/Steel Sections: SAIL, Tata, Jindal, Electrosteel, Shyamsteel

Supply and erection of single arm 6 m octagonal galvanized ( in single dip to average 80 micron) taper pole(above ground level) fabricated out of 3 mm thick sheet complete with in built junction box, base plate size 300 x 300 x20 mm ,with arm of ERW galvanized pipe of 60mm dia and 1m in length from side of pole shaft per detailed specifications.Juncion box shouldbe provided 500 mm above base plate with 4 Nos terminals on epoxy insulators, 1 No.5A SP MCB &1 no.neutral link.Base plate should have 4 Nos holes on each side suitable for mounting on existing RCC foundation 250 mm above GL. Galvanised base plate to be welded at the bottom with Gusset/Rib Plate of 15 mm thickness from 70 mm height of base plate. Note: Cost of pole foundation is not included in this item. Make-Utkarsh/Bajaj/Skipper/ELECTRO POLES PRODUCTS PVT. LTD./Crompton

Supply and erection of Supply and erection of vintage look decorative cast Iron pole of 3 Meter Length with one/two arm bracket as per approved design with base plate(min 20 mm thickness) along with base cover on the existing RCC foundation. The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. The pole shall have a weatherproof flush door and locking arrangements with all necessary electrical accessories like 4 Nos terminals on epoxy insulators, 1 No.5A SP MCB &1 no.neutral link.Base plate should have 4 Nos holes on each side suitable for mounting on RCC foundation 250 mm above GL. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Poles should have cast iron/ aluminium embellishment duly painted with polyutherine paint as per instruction of E.I.C as required to complete the work in all respect. Note: Cost of pole foundation is not included in this item. Make-Utkarsh/Bajaj/Skipper/ELECTRO POLES PRODUCTS PVT. LTD./Bajaj/Havells/Crompton

60 Watt Warm White decorative LED Light in Die- cast aluminium body IP -66 rated and having powder coated canopy design with cone shape diffuser similar as Crompton Empire model no LPTE-60-WW Rate should inclusive onsite warranty for a period of 2 years from date of supply of LED Luminaries. Make:- Bajaj, Crompton, Havells, Philips,Orient as approved by Engineer-in-charge)

Supply of following size 1.1 KV grade XLPE insulated insulated and PVC sheathed Armoured Aluminium power cable(A2XFY) of following technical Data sheet 1.1 kV (A.C) & 1.5 kV (D.C ) to Earth 3.5 cores AL conductor, XLPE insulated, galvanised steel strip / wire armoured Cables as per IS 7098 Part -1. Conductor : AL stranded compact shaped conductor as per Cl. 2, IS 8130. Insulation : Crosslinked polyethylene (XLPE) Phase Core Color : Red, yellow, blue Neutral Core Color : Black Inner Sheath : PVC / PVC tape as per IS 7098 (P - 1) Armouring : Single armouring of galvanised steel strip / wire Outer Sheath : PVC Type ST - 2 as per IS 5831. ( FRLS Type) Cable Color : Black Bidder should note that sample of the cable should be approved prior to the delivery at site form the same drum and athe cables will be supplied along with Factory Routuinee & type test cerificates for that perticular drum Make: Finolex, Polycab, Havells,KEI

3.5CX50 sq.mm

4CX16 sq.mm

Laying of one number 1.1 KV grade , XLPE insulated insulated and PVC sheathed Armoured power cable of 3.5 CX 50 sq mm /4CX16 sq.mm aluminum conductor size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Bidder should note that the quoted rates must be inclusive of cutting ,cleaning and removal of unwanted grarss bushes,creepers small plants/trees,through out the running length area during respective cable laying,as per the requirement and as per the direction of the Engineer In-Charge . The bidder should note that if any depth realted practical problem raises during exavation work for cable laying , that portion of cable will be covered by HDPE pipe Any Kind of tools,tackles,materials,labour,cartge etc,involvement required is under scope of the bidder and no additional payment will be made for that

Laying of one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5cX50 sq.mm/4CX16 sq.mm size in the existing cable tray/surface with clamping arrangement as required.Bidders should note that during laying of that perticular cable ,after completion of cable laying at the existing cable tray/surface,if laying of cable through present existing concrete cable trench is not fissable as to keep the rest of the existing services uninterrupted ,this laying of this cable length will be conducted by the bidder on surface, with proper clamping arrangement and with the drilling work for inserting the cable upto the cable tray ,after taking prior approval from Engineer In-charge,

Horizontal Installation of Pipe below Road for road crossing of Cable Bidders should note that during road crossing work for laying of cable ,if any other services like pipe line of Chiller,water pipe,HT/LT cable get dammage due to this road crossing work,same will be repaired/changed by the bidder. The moling work will be conducted after taking prior approval from Engineer In-charge.Bidder should also note that the quotated rates for Road crossing work must be inclusive of cutting of horizotal trench in the both side of road for smooth crossing of pipe below the road and refilling of that cutting /damaged( inclusive cutting at the both adjacent side of road) area of the road with proper dressing will be totally under Bidder's scope without any additional price involvement Horizontal Installation of 100 mm GI pipe as per BS1387 below the road at depth of 700 mm to 900 mm as per soil condition. Road width – 15 feet. Make :-Tata/Jindal/Shyam steel

Providing and laying cement concrete of Grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) for Backfilling of existing roads excavation complete with leveling, finishing etc. Cement: Ultratek, Birla, ACC, Ambuja

Supplying and making end termination with brass double compression gland & Aluminium Lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: Comet, Dowells,Connectwell

3.5 CX50 sq.mm

4CX16 sq.mm

100W RGB Colour LED Flood Light having die cast aluminium body with heat sink and angled bfracket Remote control for outdoor application IP 66 rated with complete installtion .

Supply and fixing of 10 Watt LED Flood Light Cool White IP65 with angled bracket for installation. Make: Osram/Oreva/Diamond