Indian Institute Of Science Education And Research Tender

S&F LED flood light fittings of 120 Watts warm white LED made up of aluminium die cast housing with toughed glass and individual LEDs with secondary optics and IP 66 protection IP 66, CCT-3000K,CRI 70,PF0.95,Surge Protection 4 KV, Luminaire efficiency:≥110 lm/W including connection with pole junction box , testing complete all as specified and as directed by Engineer-in-Charge. Note : (i)Connection cable from pole Juction box to flood light and flood light bracket shall be measured and paid seperately under respective items. (ii)Quoted rate should be inclusive of fitting of LED light any type, through ladder mounted on any type of poles/bldgs (up to 6 mtr height) on bracket along with connecting supply cable for power up of fittings all as specified and directed by Engineer in charge. NOTE: Rate should inclusive onsite warranty for a period of 2 years from date of supply of LED Luminaries. Make:- Bajaj, Crompton, Havells, Philips,Orient as approved by Engineer-in-charge)

FOUNDATION OF POLE Foundation with RCC(Gr.M20,PCC(1:3:6),12mm dia rod of size 500 mmx 500 mm x 1200 mm depth in ground with help of 4 Nos Foundation Bolt 24 mm Dia 750 Long hot dipped "L" Shaped duly finished with cement plaster, type bolt as per approved drawing. with Pole earthing by 25X6 mm 600 mm long GI Strip gruoting Ordinary Portland Cement Grade 43: Ultratek, Birla, ACC, Ambuja TMT/Steel Sections: SAIL, Tata, Jindal, Electrosteel, Shyamsteel

Supply and erection of 6 m octagonal galvanised ( in single dip to average 80 micron) taper pole(above ground level) fabricated out of 3 mm thick sheet complete with in built junction box, base plate size 300 x 300 x20 mm ,with arm of ERW galvanised pipe of 60mm dia and 1m in length from side of pole shaft per detailed specificationsalong with structural arrangement for 2 nos. LED Flood light fixing .Juncion box shouldbe provided 500 mm above base plate with 4 Nos terminals on epoxy insulators, 1 No.3A SP MCB &1 no.neutral link.Base plate should have 4 Nos holes on each side suitable for mounting on RCC foundation 250 mm above FGL. Galvanised base plate to be welded at the bottom with Gusset/Rib Plate of 15 mm thickness from 70 mm height of base plate. Poles should be aluminium embellishment duly painted with polyutherine paint, service window including junction boxas per detailed specifications. and as per instruction of E.I.C asrequired to complete the work in all respect. These poles will be erected in the existing foundation. So bidders are requested to inspect the site before consignment arrived at site. Make-Utkarsh/Bajaj/Skipper/ELECTRO POLES PRODUCTS PVT. LTD.