Indian Institute Of Management Tender

Light Panel Providing a new Lighting panel size in adequate size (H-1600 mm x W-1500 mm x D-350 mm), powder coated and smoke grey colour for MCHV building in the Panel Room. The following materials are:- 1)200 A TPN SFU unit -1 no,Make -Havells /L& T/ABB 2)125 A MCCB -3 Nos. Make - L& T /Havell/ABB 3)100 A MCCB - 2nos. Make - L& T /Havells/ABB 4)200A copper bus bar - 4 nos 5)Indication lamp (LED) - 3 nos 6)Volt meter - 1 no (Make -AE) 7)Volt meter selector switch -1 no Make-AE 8) 63 A TPN MCB-4-nos. (Make - Havells/L&T/Hagger) 9) 10/20 A SP MCB-12 nos (Make - Havells/L&T/Hagger) 10)Internal wiring by 1.5 sq mm copper flexible wire for control wiring-40 meters (Make-Polycab) 11)Iron Angle Frame for setting right the Panel in trench 12)Internal power line wiring by 10 sq mm copper flexible wire(Polycab/Finolex) from bus bar to MCCB & TPN MCB and DP MCB - 90 Meters (approx) with proper copper lugs. 13)Fabrication work and Painting

Power Panel Providing a new power panel size in adequate size (H-1600 mm x W-1800 mm x D-350 mm), powder coated and smoke grey colour for MCHV building in the Panel Room. (Interlocking sys. From power to light and light to Power) The following materials are:- 1)250 A TPN SFU unit -1 no(Make –Havells /L& T/ABB) 2)125 A MCCB - 4 Nos. Make- L& T /Havells/ABB 3) 200 A 4-Pole change over switch -1 no.with mechanical interlocking Make- Havells/Hagger/ABB 4) 200A Copper bus bar-4 nos 5)Indication lamp (LED)- 3 nos 6)Volt meter- 1 no (Make -AE) 7)Volt meter selector sw.-1 no (Make-AE) 8) 63 A TPN MCB - 4 nos (Make - Havells/L&T) 9) 10/20 A SP MCB-9 nos and 40 A DP MCB-4 nos (Make - Havells/L&T/ABB) 10)Internal wiring by 1.5 sq mm copper flexible wire for control wiring - 40 meters (Make-Polycab) 11)Internal power line wiring by 10 sq mm copper flexible wire from bus bar to MCCB & TPN MCB. -100 Meters.( approx ) with proper copper lugs. 12)Iron Angle Frame for setting right the Panel in trench 13)Fabrication work and Painting

Installation of the above power and lighting panel in the same location as per electrical norms. And Dismantling the existing panel in proper way to diposite the engg. Divn godwn.