Indian Institute Of Chemical Biology Tender

Supply of single 6" or more passive, compact trapizoidal, point source Speaker complete with all accessories. Specification: 1 x 6” Mid High Cabinet, Reflex Tuning, Impedance: 16 Ohm, Minimum 10.5 @ 290Hz, Power Handling (AES): 150 Watts (continuous), Max. Power Handling (AES): 300 Watts (program), 600 Watts (peak 10 ms), Sensitivity 2.83V / 1m: 90 dB, Max. SPL: 111 dB cont, 117 dB peak, Frequency Response (±3 dB): 87 Hz - 24 kHz, Usable Frequency Range (-10 dB): 74 Hz - 26 kHz, Dispersion: 120° x 60° or better.

Supply of single 2 X 6" or more passive, compact trapizoidal, point source Speaker complete with all accessories. Specification: 2 x 6” Reflex tuned, Mid High Point Source Cabinet, Impedance: 8 Ohm, Minimum 6.7 @ 286 Hz, Power Handling (AES): 250 Watts (continuous), Max. Power Handling (AES), 500 Watts (program), 1000 Watts (peak 10 ms), Sensitivity 2.83V / 1m: 93 dB, Max. SPL: 114 dB cont, 120 dB peak, Frequency Response (±3 dB): 90 Hz - 24 kHz, Usable Frequency Range (-10 dB): 77 Hz - 26 kHz, Dispersion: 120° x 40° or better. (Makes: EV/OHM/ Martin Audio/ Meyer Sound/ D&B Audiotech)

Supply of Wall, Ceiling Cradle complete with Handwheels for above mentioned FOH Speakers or better.

Supply of Wall, Ceiling Cradle complete with Handwheels for above mentioned Front Fill Speakers or better.

Supply of Wall, Ceiling Cradle complete with Handwheels for Rear Fill Speakers or better.

Supply of Digital 2 in 6 out installtion contrller. Software DSP control via USB, 10 PEQ. Peak limiting, 2 sec delay, marix and crossover or better and complete with all accessories. (Makes: Extron/ Creston/ XILICA/ OHM)

Supply of Stereo Audio Power Amplifier complete with all accessories. Specifications: No. of Channels: 2, Power at 4 Ohms (Stereo Mode, All channels driven): 2200W, Power at 8 Ohms (Stereo Mode, All channels driven):1400W, Bridged Power at 8 Ohms: 3500W, Dampning Factor 350 at 8ohms, Signal to Noise Ratio (1 kHz, 8 Ohms): - 100 dB, THD 0.02% THD / 4ohms and 8 ohms, Controls: Sensitivity Selection - High Pass Cut Off - Stereo, Bridge, Parallel Switch or better. (Makes: Powersoft/ Clarks/ British Acoustics/ Martin Audio)

Supply of Stereo Audio Power Amplifier complete with all accessories. Specifications: No. of Channels: 2, Power at 4 Ohms (Stereo Mode, All channels driven): 1150W, Power at 8 Ohms (Stereo Mode, All channels driven):700W, Bridged Power at 8 Ohms: 1300W, Dampning Factor 300 at 8ohms, Signal to Noise Ratio (1 kHz, 8 Ohms): - 100 dB, THD 0.02% THD / 4ohms and 8 ohms, Controls: Sensitivity Selection - High Pass Cut Off - Stereo, Bridge, Parallel Switch or better. (Makes: Powersoft/ Clarks/ British Acoustics/ Martin Audio)

Supply of passive single 10" full range floo mounted speaker complete with all accessories. Specifications: Frequency Response (-3 dB): 68 Hz - 20kHz, Frequency Range (-10 dB): 50 Hz - 20 kHz, Rated Power: 300W Continuous, 1200W Peak, Nominal Impedance: 8 ohms, Coverage Pattern: 90° x 90°, Maximum SPL: 126 dB, Sensitivity: 95 dB, LF Driver: 10" LF Driver, 2.5" VC - Ferrite, HF Driver: 1" exit compression driver, 2" VC, Enclosure: Birch Plywood Enclosure, Grill: Powder-coated durable grill with acoustically transparent foam or better. (Makes: Clarks/ British Acoustics/ Martin Audio/ Meyer Sound/ OSL)

Supply of 32 Stereo channels Live Mixer complete with all accessories. Specification: 32 stereo/mono input channels, 44 buss/return channels, Run 8 SoundGrid-compatible plugins directly on each channelChannel strip processing provided by plugins16 monitor auxes and 8 FX auxes (stereo/mono), 8 matrixes, 8 audio groups, L/R/C/Mono16 DCA faders, 8 mute groups, 8 user-assignable shortcut keys,Includes the Remote Control App – populate layers with DCA-linked channels32-bit floating point mix engine; up to 96 kHz sample rate Compatible with industry-standard controllers, including personal monitoring app, share up to 16 stageboxes, expansion slots or DAWsShare the same stagebox between multiplemixers at FOH and monitors,Windows/Mac 64 bit-compatible, or better. Must Include the Stage Rack. (Makes: Waves/ Digico)

Supply of Wired High-performance Handheld Vocal Microphone (cardioid, dynamic) with metal housing & adapted sensitivity for deep vocals. Including 1 Travel Case , 2 Placement Rings & 2 Wind Protectors, or better. (Makes: DPA/ OSL/ Shure/ Nuemann/ Sennheiser)

Supply of 18" Goosneck Microphone with Base and push button complete with all accessories. Specification: 18" Goosenck Microphone with Base and Push button for announcement with the following Critical Performance Indicators: For the 18" Gooseneck Microphone: Type:Electret Condenser, Frequency Response: 20 Hz - 17 kHz, Polar Pattern: Supercardioid, Sensitivity: -36±3 dB* (15.8mV) 0dB =1V/ Pa,1kHz, Impedance: 100 Ω, Connector: Three-pin balanced XLR, Max SPL: 140 dB, 1 kHz at 1% T.H.D., or better. For the Gooseneck Microphone Base with Push Button: Frequency Response: 20- 20,000 Hz, Power Requirement: Phantom power 48V or battery power 1.5V*2, Current Consumption-Stand-by: 2.4mA, Current Consumption-Operating: 6.6mA, Switches, Microphone selection:ECM MIC unbalanced input, ECM MIC balanced input, Dynamic MIC input Magnetic switch: power on/off, Connector: audio output (XLR 3P Male), or better. (Makes: DPA/ OSL/ Shure/ Nuemann/ Sennheiser)

Supply of Wireless Receiver-16 Channels simultaneous use, complete with all accessories. Specifications: Operating Channels - 16 Channels Simultaneous Use, Frequency Selection - Auto Selection with IR Sync, Frequency Range, 20 Hz - 20 kHz, Power Supply - DC12V-18V / 500mA, Modulation - Wideband FM, Must Support Externa Antenna Extention. (Makes: DPA/ OSL/ Shure/ Nuemann/ Sennheiser)

Supply of Wireless Handheld Microphone complete with all accessories. Specifications: Type: Dynamic, Pattern: Cardioid, Oeprating Range: 100 ft Line of Sight, Mute Switch, Steel Mesh Grille, RF Output - 30 mW, RF Range 100m Line of Sight, Operation Time - 8 Hours, or better. (Makes: DPA/ OSL/ Shure/ Nuemann/ Sennheiser)

Supply of Headset/ Lapel Microphone complete with all accessories. Specifications: Type: Dynamic, Pattern: Cardioid, Oeprating Range: 100 ft Line of Sight, Mute Switch, Steel Mesh Grille, RF Output - 30 mW, RF Range 100m Line of Sight, Operation Time - 8 Hours, or better. (Makes: DPA/ OSL/ Shure/ Nuemann/ Sennheiser)

Supply of Microphone Stand (Big) complete with all accessories. (Please Ref. attached documets for specification).

Supply of 2 core 2.5 Sq.mm. Premium Copper Conduction Speaker Cable. (Makes: Belden/ LYNQ/ Krystal/ Sommer / Klotz)

Supply of 2 core shielded Microphone / Signal Cable. (Makes: Belden/ LYNQ/ Krystal/ Sommer / Klotz)

Supply of 17 U or higher Rack for installation Audio Equipments complete in all respect. (Makes: Valrack / Emerson / APC / Legrand)

Supply of 24 Pair audio Snake cable Microphone / Signal Cable Cable ( Make : Belden/ LYNQ/ Krystal/ Sommer / Klotz or its equivallent)

Supply of following Lighting Fixtures and other accessories Suitable for J.C Ray Auditorium of CSIR-complete as required.:

CE Certified 100W LED Spun Aluminium PARCAN Light 3200K with RDM/DMX protocol and duly epoxy polyester powder coated in black matt texture finish with following specifications - • LED : 100W 3200K ±200K 1 Nos Citizen or Cree. • CRI, TLCI : 90 • Beam Angle : 9°-30° zoomable • Power Consumption : 100W ± 10% • Light Out put : 40,000 Lux at 2 Mtrs • User Interface : 4 Nos High Precision Tactile type selector switch with Display • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

CE Certified 120W LED Fresnel spot Light 3200K with Extruded aluminium body duly epoxy polyester powder coated in black matt texture finish with following specifications - • LED : 120W COB LED 3200K ± 150K • CRI, TLCI, R9 Value : ≥ 93 • Beam Angle : Min 10° to 50° • Power Consumption: 100W±15%, Power Factor≥0.95 @ 230V • Gel Frame/Diffuser & Barndoor slot for accessories inserting. • Light Out put: 30,500 Lux at 2Mtrs Nos 4 87949.18 351796.72 • User Interface: 4Nos High Precision Tactile type selector switch with Display • 200mm ± 10mm Dia branded fresnel lens bubbles and crack free to provide uniform light output. • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR. (Make : Canara Lighting/Modern Lights/New Stage Craft)

CE Certified 200W LED BLINDER Light 3200K with RDM protocol and MS / Aluminium sheet duly epoxy polyester powder coated in black matt texture finish with following specifications - • Correlated color temperature (CCT) : 3200K ± 200K, Citizen, Cree, Nichia • Beam Angle : 40°. • Power Consumption : 180W • Light Out put : 4 ,000 Lux at 2 Mtrs • User Interface : 4 Nos High Precision Tactile type selector switch with Seven Segment Display • Fully RDM Compliant when in DMX mode • Power Supply Unit Makes: Inventronics, Mean well or Philips. • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

CE Certified 220W LED profile spot Light 3200K with RDM/DMX protocol and Die cast body duly epoxy polyester powder coated in black matt texture finish with following specifications – • LED : 220W COB LED 3200K ± 200K • CRI, TLCI Value : 93 • Beam Angle : 15° or 19° • Power Consumption : 200W • Light Out put : 20,000 Lux at 2 Mtrs • User Interface : 4 Nos High Precision Tactile type selector switch with LCD Display • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

CE Certified 54 x 3W LED RGBW PAR Light with RDM protocol and die cast aluminium body duly epoxy polyester powder coated in black matt texture finish with following specifications - • LED : 54x3W RGBW LED(12R+18G+18B+6W) 54 Nos • Beam Angle : 15° or 25° with PMMA Lens • Light Out put : 10,500 Lux at 2 Mtrs • User Interface : 4 Nos High Precision Tactile type selector switch with Seven Segment Display • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

CE Certified 150W LED RGBW Cyclorama Wash Light with RDM protocol and Laser cut aluminium body duly epoxy polyester powder coated in black matt texture finish with following specifications - • LED : 480x0.5W RGBW LED (120R+120G+120B+120W) Nichia or Lumiled Make LED • Beam Angle : 96° • Detachable Assymmetric reflector for uniform wash. • Power Consumption : 150W • Light Out put : 3000 Lux at 1 Mtrs without assymmetric reflector. • User Interface : 4 Nos High Precision Tactile type selector switch with Seven Segment Display • Fully RDM Compliant when in DMX mode • Dimming : 0 to 100% 8 Bit Linear Dimming • DMX data IN / OUT: 5 pin locking XLR • Natural Cooling System. No fan, No noise. • 2.5 m Power In + 0.5 m Power out or 3 Mtr 3 core 1 mm² FRLS & ISI mark cable with 3pin IEC Male Plug • 3 mtr DMX loop cable with cable mount 5 pin locking XLR • CE Certificate should be enclosed to ensure the required quality and safety of the products. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

4 - leaf barndoor for fresnel spot light, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications. • Lock - MS threaded Galvanized lock key, • Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope 3mm thick with sleeve fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly. SWL 100Kgs. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

MS Fabricated Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures, black epoxy polyester powder coated, with 4 way 10A IEC sockets and pipe clamp arrangement with below specifications. • 4 way 10A IEC Socket • Fixing : Snap fit /15 (1.5mm), • CE certified FC/PG 11 cable entry gland, • Junction Box must be compact of Size : 140 x 112 x 50mm or less • with suitable fixing arrangement. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

MS Fabricated 2 way IEC Junction box with rocker switch to power splitter and console made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement. • 2 way 10A IEC Socket • DPST 4 Pins Toggle Button Rocker switch • CE certified FC/PG 11 cable entry gland, • Junction Box must be compact of Size: 140 x 112 x 50mm or less • with suitable fixing arrangement. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male plug made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement with below specifications. • 5 pin XLR DMX IN (Male plug) of reputed make connector, • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, • Optional connection to easily join pin 1 to chassis ground. • CE certified FC/PG 7 cable entry gland, • Junction Box must be compact of 125 x 112 x 50mm or less • with suitable fixing arrangement. ( Make : Canara Lighting/SHENOY LIGHT/RAY LIGHT/ Leksa)

MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX Female plug made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement with below specifications. • 5 pin XLR DMX OUT (Female plug) of reputed make connector, • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, • Optional connection to easily join pin 1 to chassis ground. • CE certified FC/PG 7 cable entry gland, • Junction Box must be compact of 125 x 112 x 50mm or less • with suitable fixing arrangement. ( Make : Canara Lighting/SHENOY LIGHT/RAY LIGHT/ Leksa)

MS Fabricated Direct Lighting distribution Board with MCB Panel made up of 14SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt Siemens grey texture finish. ( Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

RDM Compatible DMX Splitter with 1 DMX in and optically isolated 8 DMX out port for DMX network Splitter enclosure made up of MS 18/16 SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. • Control Protocol RDM and DMX 512 • 2 DMX input 5 pin XLR Connectors • 8 optically isolated DMX output 5 pin XLR Connectors • IEC/Nutrik male plug to power supply the splitter • 4 Nos of high precision tactile switch for mode selection. • Splitter must be compact of Size : 145 x 483 x 45mm or less • Splitter bracket for mounting or 19” rack mount (Make : Canara Lighting/Modern Lights/New Stage Craft/ Leksa)

RDM Compatible Digital Lighting Console with Ultimate portability, powerful LED and moving light controller, small 19” unit with direct access to each of the lights. • 1024 DMX Channel • LCD Screen for easy Navigation • DMX compatible • Control up to 120 LED, moving lights and conventionals individuals • RDM & Artnet support with ethernet port • multi-function faders. ( Make : Avolite / Liteputer /Zero88 / Canara / Leksa)

Supply of 5 pin XLR male / female connectors made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination. (Make : Neutrik / Liteputer/ Amphenol)

Supply of 5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister, 0.25Watt for signal termination. (Make : Neutrik / Liteputer/ Amphenol/ Reputed Make)

Supply of FR CE Certified DMX signal cable for DMX network. (Make : Falcon / Beldon / Deepcab / Polycab.)

Installation, Testing and commissioning of above Audio and Lighting equipment / accessories, laying of Cables including supply of Medium Class PVC Conduits, all connectors (other than item no. 7 and 8), terminals, Glands, Sockets etc. complete as required.