Indian Army Tender

S and F copper wound wall mounted Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 160V to 270V , Supply & Fix copper wound wall mounted Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 160V to 270V with output Voltage Stabilizer at 220V to 240V with accuracy of PLUS 2 percent and of capacity of 5 KVA complete all as specified. Make. VGuard, Sen & Pandit or eqvt

S and F for circuit sub main wiring with approved colour coding as per IS Red Black and Green for single phase circuits with two single core 4.0 sqmm , S&F for circuit/sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 4.0 sqmm and one 4.0 sqmm, 1100 volts grade PVC insulated FRLS cable with stranded copper conductor drawing into and incl PVC casing caping, complete all as specified.

S and F epoxy powder coated sheet metal enclosure for DBs double door Single pole and neutral 240V 2 ways , Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 2 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S and F epoxy powder coated sheet metal enclosure single pole with a two pin and earth plug and socket complete with one single pole MCB 20 Amps , Supply & fix epoxy powder coated sheet metal enclosure, single pole with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 Volts for DBs, single door complete all as specified and directed.

Supply and fixed switch socket combination 2 in 1 5 pin 5.15 amp flush type all as directed by EIC. , Supply and fixed switch socket combination 2 in 1, 5 pin, 5/15 amp flush type all as directed by EIC.

S and F copper wound wall mounted Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 140V to 270V , Supply & Fix copper wound wall mounted Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 140V to 270V with output Voltage Stabilizer at 220V to 240V with accuracy of +2% and of capacity of 4 KVA complete all as specified. Make. VGuard, Sen & Pandit or eqvt

S and F epoxy powder coated sheet metal enclosure for DBs double door Single pole and neutral 240 V 8 ways , Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S and F in MCB SP 6 to 32 Amps C series 10kA 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed. , S&F in MCB SP, 6 to 32 Amps, C series 10kA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed.

S and F in MCB TPN 40 to 63 Amps C series 10kA 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed. , S&F in MCB TPN 40 to 63 Amps, C series 10kA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed.

S and F epoxy powder coated sheet metal enclosure for DBs single door single pole and neutral 240V 20 to 32 Amps with earth plug complete all as specified and directed. , Supply & fix epoxy powder coated sheet metal enclosure for DBs, single door, single pole and neutral 240 V, 20 32 Amps, with earth plug complete all as specified and directed.

S and F for circuit sub main wiring with approved colour coding as per IS Red Black and Green for single phase circuits with two single core 6.0 sqmm and one 4.0 sqmm 1100 volts grade PVC insulated , S&F for circuit/sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 6.0 sqmm and one 4.0 sqmm, 1100 volts grade PVC insulated FRLS cable with stranded copper conductor drawing into and incl PVC casing caping, complete all as specified.

S and F XLPE armoured cable 16 sqmm 4 core 1100 volts grade heavy duty cable ISI marked passing through pipe with PVC insulated aluminium conductor , S&F XLPE armoured cable 16 sqmm 4 core, 1100 volts grade heavy duty cable, ISI marked passing through pipe with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and directed , Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed

Returning filling including spreading leveling watering and well ramming in layers not exc. 25cmin soft loose soil complete all as specified and as directed. , Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. , Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable etc. , Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

M and L sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete. , M&L sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete.

S and F pipes galvanized 40 mm bore light grade supplied and laid complete incl necessary fittings such as tees bends elbows, sockets reducers etc as per site requirement or specified , S&F pipes galvanized, 40 mm bore ight grade, supplied and laid complete incl necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick burried directly in ground to a depth not less than 2.25 metres deep below ground etc. , Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI light grade pipe from upper end of earth plate upto equipments,20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1.2.4 type B1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1.2.4 type B1, duly reinforced with MS round bars 6mm dia 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note. If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

S and F in MCB TPN 4P 40 to 63 Amps C series 10kA 415 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed. , S&F in MCB TPN, 4P, 40 to 63 Amps, C series 10kA, 415 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed.

S and F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver lamp bracket with impact etc. , Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and passing through steel tubler pole service connection1100 volts grade multicore round insulated copper conductor and sheathed flexible cable multistranded three core etc. , Supply and passing through steel tubler pole/service connection, 1100 volts grade multicore round insulated copper conductor and sheathed flexible cable,multistranded, three core of nominal cross sectonal area 1.5 Sq mm complete all as specified and as directed.

Supply and laying for cable in trenches or passing through pipe XLPE insulated heavy duty galvanised steel strip or wire armoured electric LT cable etc. , Supply and laying for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 4 core.

Supply and fixing laying 40mm bore steel tubings galvanised light grade with all fitting laid across road in trenches or across PCC drain or along electric pole or floor wall etc. , Supply and fixing/laying 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed.

Steel tubular swaged poles complete with cast iron base plate finial taper plug bolts nuts nd screws as specified type 410 SP31 9.0 metres long. , Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP31 (9.0 metres long) complete all as specified & directed.

Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore dia under Road Foot Path not exc. 10.00 mtr in a Single Length complete all as specified and as directed. , Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and as directed. Note. Pipe to be measured separately.

M and L for PCC 1.3.6 type C2 using 40 mm graded aggregate as in foundation for pole etc complete all as specified and as directed. , M&L for PCC 1.3.6 type C2 (using 40 mm graded aggregate) as in foundation for pole etc complete all as specified and as directed.

M and L for PCC 1.2.4 type B1 using 20 mm graded aggregate as in coping for pole including form work and finishing the surfaces even and smooth etc complete all as specified and as directed. , M&L for PCC 1.2.4 type B1 (using 20 mm graded aggregate) as in coping for pole including form work and finishing the surfaces even and smooth etc complete all as specified and as directed.

S and F single arm bracket made 40mm dia 1. mtr long for security light with mounting ms clamp of flat iron size 25X25mm of suitable length 2 pair including nut bolt etc. , S and F single arm bracket made 40mm dia 1. mtr long for security light, with mounting ms clamp of flat iron size 25X25mm of suitable length 2 pair including nut bolt etc. of suitable size and painting to ms clamp with two coats of aluminium paints over a coat red oxide metal primer all as per specification and directed by Eic.

S and F Cable Junction Box 200X160X98mm in size made out of thermoplastic having IP 65 protection for outdoor installation fixed with 4 way bakelite cable etc. , S&F Cable Junction Box 200X160X98mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M32 02 No & M25 01 No) fixed on poles with Aluminium clamps of size 25x3mm, nuts, bolts, washers etc. including taking out of old unserviceable cable junction box complete all as specified and as directed. Make. Cat No. K8250 of HENSEL or equivalent model in SPELSBERG/Sintex.

S and F 40 mm High density polyethylene pipe HDPE of pressure rating 6 kgf cm2 fixed complete to walls ceilings or in floors etc. , S & F 40 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S and F exhaust ventilation fan with louvers of sweep 380mm 230 volts with blade and frame and loures steel body ISI marked. , Supply & fixing exhaust ventilation fan with louvers of sweep 380mm,230 volts, with blade and frame and loures steel body,ISI marked complete all as directed by EIC.

Supply and fixing Heavy duty wall mounted fan of size 450mm sweep 1450 RPM air delivery 150CMM 80Watt . , Supply and fixing Heavy duty wall mounted fan of size 450mm sweep 1450 RPM air delivery 150CMM 80Watt . Make.Havells,Orent,Bajaj.

Material and labour point wiring for light point fan point one light fan exhaust fan point controlled by one one way switch using 1.5 sqmm nominal cross sectional area multistranded , Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item above 5 Amp socket on Independent board with other switches. , All as per item above 5 Amp socket on Independent board with other switches.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin 6 Amps flush type controlled by one switch complete all as specified. , Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

Supply and fixed switch piano flush type single pole 5.6 Amps one way complete all as specified. , Supply and fixed switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

Supply and fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified. , Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S and F for circuit sub main wiring with approved colour coding as per IS Red Black and Green for single phase circuits with two single core 4.0 sqmm , S&F for circuit/sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 4.0 sqmm and one 4.0 sqmm, 1100 volts grade PVC insulated FRLS cable with stranded copper conductor drawing into and incl PVC non metallic rigid conduit medium grade, complete all as specified.