Housing Directorate Tender

(a) 15 mm. thick plaster. (i) In 1st. Floor.

(a) 20 mm.thick plaster. (i) In 1st. Floor.

Artificial stone in floor, dado, staircase etc. with cement conctrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all materials and labour In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement. Using grey cement. (a) 25 mm. thick. (i) In 1st. floor.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). (a) Sal : Siliguri. (i) In 1st. Floor.

Panel shutters of door and window, as per design (each panel consisting of single plank with out joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, panel rate of reduction of 20% will be made). (a) 35mm.thick shutters with 19 mm. thick panel of size 30 to 45cm. (i) sishu,gamar,Champ,badam,bhola, mogra,Hallak, .

Shutter of 1/3 rd panel, 2/3 glazed of doors and windows, as per design (each panel consisting of a single plank without joint and with ordinary glass of 7.4 kg. per sq.m./3 mm. thick) fitted with putty bed , teak wood bead and nails including fitting and fixing shutters in position but excluding the cost of glass, putty, Teak bead, nails, hinges etc. and other fittings, in ground floor. (a) 35 mm thick shutters with 19 mm. thick panel. (i) sishu,gamar,Champ,badam,bhola, mogra,Hallak, .

Taking out shutter of door and window, dismantaling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fitting but with new screws as necessary.( where different part of same shutter are renewed under different item, payment under item 73 will be made once only).

Priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary. (a) On timber or plastered surface: . With super gloss (hi-gloss). (i) Two coats (with any shade except white).

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete (In all floors for internal wall & upto 6m height for external wall ). (a) 4 mm. thick.

PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade inposition, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C.multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm)wall thickness.Horizontal & vertical section shall be fixed to each other by selftapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shapedbracket 100mm x 200mm in each corner of the shutter frame for placing hinges.Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of200 mm long at both ends and screws from both sides as lock rail. The sectionframe will then be fitted in by PVC panels of size 100 mmx25 mm with wallthickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will beinserted horizontally with both side check and nut system and stretches wherefixing of hinges / hasp bolt / tower bolt / door ring are required to be strongenough to with stand wear and tear. The rate is inclusive of cost of all materials,labour, and hire of tools and plants and appliancesi/c carriage of all materialstaxes and all other incidental charges complete

Cleaning silt of inspection pit.

Dismantling and refixing pit cover.

Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed. (a) For 30 users:-. (i) Beyond a lead of 150 metre and outside the Muncipal limit.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc.

Wash basin white vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm X 75mm X 75mm wood blocks and C.I. Brackets including two coats of painting of C.I. Brackets. (a) 550 mm x 400 mm size.

Supplying, fitting and fixing approved brand 32mm dia P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (a) 900mm long.

Supplying, fitting & fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P.nut, 15mm dia. (a) 450mm long.

Supplying, fitting and fixing pillar cock of approved make. (a) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

Supplying, fitting and fixing bib cock or stop cock. (a) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (a) 530 mm X 410 mm.

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting. (a) 250 mm long.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.

(a) 100mm x 50 mm x 1.25 mm.

(b) 75mm x 40 mm x 1.12 mm.

Polymer concrete made with water resistant bonding agent of syntheticrubber emulsion as per manufacturer's specification excluding the cost ofcement concrete (2.75 Kg / bag of cement)Note : Payment on volume of (1 : 1½ : 3) Concrete.

Extra rate for using water proofing and plasticising admixture @ 0.2% byweight of cement (or at manufacturer's specified rate) for concrete of variousgrades.