Housing Directorate Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Housing Directorate Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Jun 2024
Closing DateCancelled
Tender Amount₹ 22,47,25,452
Costs
EMD
₹ 10,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of 3024 Nos Of Flats Along With Other Amenities At Bijoynagar And Daskeary_jlno_02 Mouza In Raniganj Area Asansol Dist_paschim Bardhaman
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HSD_690274_1Tender No
WBHOUSING/SERCFAe-NIT02_5th CALL _2023-2024Tender Authority
Housing Directorate ViewPurchaser Address
-Website
http://https://wbhousing.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and
consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
2139.28
1114714
52107
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
6060.82
145459
24
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor
(A)[Pakur Variety] (a)1:3:6 proportion
100.4
475973
4740.77
Batch Mixed concrete of M 25 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in computerised batching plant under controlled condition
using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of
concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification and direction
of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all accessories vibrators etc. inclusive of all other
incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through
separate item. Consumption of cement will not be less than 300 Kg of cement per cubic meter of controlled concrete but actual consumption will be
determined on the basis of preliminary test and job mix foumula. [Cement to be supplied by Deptt, if Cement is supplied by agency then item rate to be deduced as per Format A of Annexure I]
[with Batching Plant & transit mixer] In Ground Floor& Foundation. [Pakur Variety]. (i) Without approved concrete pump.
843.88
4733592
5609.32
1st floor
376.72
2148931
5704.32
2nd floor
376.72
2184719
5799.32
3rd floor
489.84
2887273
5894.32
4th floor
132.36
792746
5989.32
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing
and direction. ii) JSW/JSPL/SHYAM
In Ground Floor
104.54
5704077
54563.59
1st floor
53.5
2944832
55043.59
2nd floor
53.5
2970512
55523.59
3rd floor
62.92
3523745
56003.59
4th floor
21.22
1198581
56483.59
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
3669.27
1188843
324
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement. (In Ground Floor)
152.04
717802
4721.14
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal
size) excluding shuttering and reinforcement,if any, in gound floor as per
relevant IS codes.
in gound floor
211
1010561
4789.39
1st floor
36.36
177632
4885.39
2nd floor
36.36
181123
4981.39
3rd floor
36.36
184613
5077.39
4th floor
296.64
1534634
5173.39
Brick work with 1st class modular bricks. With cement mortar (1:6)
(a) In foundation and plinth
535.75
2553925
4767.01
200 mm. thick Brick work with Fly Ash Bricks set in cement sand mortar (1:6)
including raking out joints, curing, scaffolding etc. complete in all respect.
In ground floor
356.4
1630914
4576.08
1st floor
356.4
1670475
4687.08
2nd floor
356.4
1710035
4798.08
3rd floor
356.4
1749596
4909.08
4th floor
140.64
706024
5020.08
In Water Tank Wall
53.2
267068
5020.08
100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4)
including raking out joints, curing, scaffolding etc. complete in all respect.
In ground floor
849.24
445876
525.03
1st floor
849.24
454368
535.03
2nd floor
849.24
462861
545.03
3rd floor
849.24
471353
555.03
4th floor
902.4
509883
565.03
Labour for Chipping of concrete surface before taking up Plastering work.
23962.24
503207
21
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster
In ground floor
14749.82
1969838
133.55
1st floor
11797.76
1622781
137.55
2nd floor
11797.76
1669972
141.55
3rd floor
11797.76
1717163
145.55
4th floor
4557.17
681524
149.55
With 1:4 cement mortar (c) 10 mm thick plaster. (Ground Floor)
2550.24
307431
120.55
1st floor
2481.6
309083
124.55
2nd floor
2481.6
319009
128.55
3rd floor
2596.16
344121
132.55
4th floor
276.21
37716
136.55
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)
(f) 25 mm to 30 mm shuttering without staging in foundation
2016.8
413444
205
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. (Ground Floor)
710.76
233129
328
1st floor
659.28
228110
346
2nd floor
659.28
239977
364
3rd floor
659.28
251844
382
4th floor
17.9
7160
400
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering
in any concrete work
In ground floor
3228.7
1172018
363
1st floor
3216.1
1225334
381
2nd floor
3216.1
1283223
399
3rd floor
3754.44
1565601
417
4th floor
1982.76
862500
435
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including
smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.
In ground floor.
3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).
Using grey cement
iii) 35 mm. thick
In ground floor
7216.41
2260251
313.21
1st floor
6807.64
2164216
317.91
2nd floor
6807.64
2196212
322.61
3rd floor
6807.64
2228208
327.31
4th floor
107.83
35800
332.01
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m (Gr. Floor)
6113.32
200088
32.73
1st floor
1541.19
50443
32.73
2nd floor
1541.19
50443
32.73
3rd floor
1541.19
50443
32.73
4th floor
1127.89
36915
32.73
White washing including cleaning and smoothening surface thoroughly. (c) Three coats (on new works only). Internal Plaster. (Ground Floor)
29385.9
588011
20.01
1st floor
29385.9
588011
20.01
2nd floor
29385.9
588011
20.01
3rd floor
29385.9
588011
20.01
4th floor
2106
42141
20.01
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly
(plastered or concrete surface) as per manufacturer's specification.
In Ground floor (iii) Two coats.
13185.9
646109
49
1st floor
13033.8
647910
49.71
2nd floor
13033.8
657164
50.42
3rd floor
13356.45
682915
51.13
4th floor
8224.65
426365
51.84
PVC Door Shutter-37 mm thick:
Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower
bolt,door ring etc.
In ground floor
283.5
648364
2287
1st floor
283.5
652333
2301
2nd floor
283.5
656302
2315
3rd floor
283.5
660271
2329
Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with
both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc.
In ground floor (Gr. Floor)
891
248589
279
1st floor
891
248589
279
2nd floor
891
248589
279
3rd floor
891
248589
279
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length,
fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and
plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment
for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd
floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.
I) For structural members of specified sections weighing l 25 x 25 x 5 mm. (Gr. Floor)
2.02
146875
72603
1st floor
1.35
99410
73692.04
2nd floor
1.35
100879
74781.08
3rd floor
1.35
102348
75870.12
4th floor
0.34
25935
76959.16
Supplying solid flush type doors of commercial quality, the timber frame
consisting of top and bottom rails and side styles of well seasoned timber 65mm
wide each and the entire frame fitted with 37.5mm wide battens places both ways
in order to make the door of solid core and internal lipping with Garjan or
similar wood veneers using phenol formaldehyde as glue etc. complete, including
fitting, fixing shutters in position but excluding the cost of hinges and other
fittings in ground floor.
(a) 35 mm thick shutters (single leaf) (Gr. Floor)
1196.79
3182264
2659
1st floor
1196.79
3199019
2673
2nd floor
1196.79
3215774
2687
3rd floor
1196.79
3232529
2701
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI
mark.
(viii) 100mm. X 75mm. X 3.50mm. (Ground Floor)
2160
142560
66
1st floor
2160
142560
66
2nd floor
2160
142560
66
3rd floor
2160
142560
66
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with
16mm dia rod with centre bolt and round fitting.
(c) 300mm long. (Gr. Floor)
720
119520
166
1st floor
720
119520
166
2nd floor
720
119520
166
3rd floor
720
119520
166
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
(vi) 200mm long x 10mm dia. bolt. (Gr. Floor)
720
56160
78
1st floor
720
56160
78
2nd floor
720
56160
78
3rd floor
720
56160
78
100mm long x 10mm dia. bolt. (Gr. Floor)
360
19080
53
1st floor
360
19080
53
2nd floor
360
19080
53
3rd floor
360
19080
53
Anodised aluminium butt hinges of approved quality manufactured from extruded
section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with
cadmium plated screws
(iv) 75 x 63 x 3.2mm
(Gr. Floor)
540
33480
62
1st floor
540
33480
62
2nd floor
540
33480
62
3rd floor
540
33480
62
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
(a) With continuous plate base (Hexagonal/ Round rod)
(ii) 100 mm grip x 10 mm dia rod. (Ground Floor)
360
24840
69
1st floor
360
24840
69
2nd floor
360
24840
69
3rd floor
360
24840
69
(a) Metallic magic eye of approved quality fitted and fixed complete.
Ground floor
180
9720
54
1st floor
180
9720
54
2nd floor
180
9720
54
3rd floor
180
9720
54
(ii) Door stopper (Anodised aluminium)
Ground floor
720
50400
70
1st floor
720
50400
70
2nd floor
720
50400
70
3rd floor
720
50400
70
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,
handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
(Add extra @ 1.2 % for each additional floors upto 4th floor and @1.5% for each addl. Floor above 4th floor.)
In Ground floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
Without integrated grills.
(b) Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars. [The extra rate admissible for the
openable portion only]
816.6
1795703
2199
1st floor
866.4
1928077
2225.39
2nd floor
867.6
1953644
2251.78
3rd floor
848.4
1932799
2278.17
(c ) Extra over item no. 33 (a) and (b) for,
viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.
(Ground Floor)
4899.6
460562
94
1st floor
5198.4
494523
95.13
2nd floor
5205.6
501091
96.26
3rd floor
5090.4
495754
97.39
(iv) Two point nose steel handle including fitting and fixing.(Ground Floor)
1980
99000
50
1st floor
2088
105652
50.6
2nd floor
2088
106905
51.2
3rd floor
2088
108158
51.8
(vi) steel peg stay 300 mm long including fitting and fixing. (Gr. Floor)
2004
70140
35
1st floor
2088
73956
35.42
2nd floor
2088
74833
35.84
3rd floor
1972
71504
36.26
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor)
(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.. (Ground Floor)
134.1
1524877
11371.2
1st floor
109.33
1255645
11484.91
2nd floor
109.33
1268077
11598.62
3rd floor
109.93
1287536
11712.33
R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10 mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete. In ground floor (a) 50 mm. Thick panels
I. SAIL/ TATA/RINL (Gr. Floor)
90
96721
1074.68
1st floor
90
97531
1083.68
2nd floor
90
98341
1092.68
3rd floor
90
99151
1101.68
(A) Supplying fitting and fixing door frame with M.S. angle as per drawing & direction of required section.The holes for counter sunk machine screw & nuts will be such as to fit 8 to 10 mm Iron screw. The counter sunk nut to be welded . The nuts are to be welded after careful checking with screw.All welding spots
should be properly filed or rounded smooth including cost of welding hinges for hinge cleats , lugs for hasp bolt, socket bolt etc. and necessary M.S. clamps of 25mm x 6mm flat 225mm long as per direction welded to the frame fitted and fixed in position excluding cost of concrete
(Ground Floor)
9336.4
737575
79
1st floor
7663.6
605424
79
2nd floor
7663.6
605424
79
3rd floor
7663.6
605424
79
4th floor
1472.88
116357
79
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than
150mm apart complete in all respect as per design including cost of
all labour and materials.
(Gr. Floor)
207.9
271101
1304
4th floor
94.5
123228
1304
b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand
papering etc. (Ground Floor)
3127.5
118845
38
1st floor
3127.5
118845
38
2nd floor
3127.5
118845
38
3rd floor
3127.5
118845
38
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand
papering etc. (Gr. Floor)
2704.5
78430
29
1st floor
2277
66033
29
2nd floor
2277
66033
29
3rd floor
2277
66033
29
4th floor
94.5
2740
29
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
a) On timber or plastered surface
iv) Two coats (with any shade except white) . (Ground Floor)
3127.5
253327
81
1st floor
3127.5
253327
81
2nd floor
3127.5
253327
81
3rd floor
3127.5
253327
81
(b) On steel or other metal surface : With super gloss (hi-gloss). (Ground Floor)
2704.5
213655
79
1st floor
2277
179883
79
2nd floor
2277
179883
79
3rd floor
2277
179883
79
4th floor
94.5
7465
79
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6
m height for external wall).
(ii) 4 mm thick (Ground Floor)
1116.28
598326
536
1st floor
1198.35
642315
536
2nd floor
1198.35
642315
536
3rd floor
1198.35
642315
536
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
A) UPVC Pipes:
ii)110 mm. Dia.
2169.6
544569
251
i)75 mm. Dia.
1686
316968
188
a) Plain Tee
(i) 75 mm. Dia.
704
71808
102
Bend 87.5 degree. 110 mm. Dia.
176
24640
140
Shoe 110 mm. Dia.
176
19536
111
Shoe 75 mm. Dia.
176
13728
78
Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately (Ground Floor)
272
27200
100
1st floor
272
27200
100
2nd floor
272
27200
100
3rd floor
272
27200
100
Pre-Constructional Anti-termite measures:
(c) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to
75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS 6313 (part -II) 1981. ( Mode of measurment will be
per Sq.m of plan area of plinth treated.)
4647.46
432213
93
(d) Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS 6313 (part-II) 1981 (Mode of measurement will be per
sq.m. of vertical area of foundation treated).
6419.52
879474
137
Post Constructional Measures : (a) Anti-termite treatment to the outside of
foundations with chemical emulsion by admixing
chloropyrofos emulsifiable concentrates
(1%concentration) with water by weight including
cutting shallow channel by excavating soil along and
close to the wall face ensuring uniform dispersal of the
chemical emulsion to a depth of 300mm. from the
ground level by rodding with 12mm. dia. M.S. rod at
150mm.interval in the channel. 1.75 litres of chemical
emulsion per metre length shall be used and a balance
quantity of 0.5 litres of the chemical emulsion per
running metre shall then be used to treat the back fill
earth by directing the spray of the imulsion towards
the wall surface. The entire work is to be carried out
as per specification laid down in para 4.3.1.1 of code
IS-6313 (Part-III) 1981.
2148.75
154710
72
(b) Anti-termite treatment to the outside of foundation
with chemical emulsion by admixing chloropyrofos
emulsifiable concentrate (1% concentration) with
water by weight, drilling 12mm. dia holes in concrete
or masonry apron at an interval of 300mm. to a depth,
of 300mm or more as close to the plinth wall as
possible and the chemical emulsion pumped into those
holes to soak the soil below at a rate of 2.25 litres per
linear metre complete as per specification laid down
in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981.
4367.25
1122383
257
Extra rate for using water proofing and plasticising admixture @ 0.2% by
weight of cement (or at manufacturer's specified rate) for concrete of various
grades.
117.07
13931
119
Extra rate for adding Polyester Fibre anti shrinkage material @ 0.25% by
weight of cement [or as per Manufacturer's Specification] as secondary
reinforcement to arrest hair crack in concrete including cost of Fibre .
146.28
60559
414
25mm. thick damp proof course with cement concrete with
stone chips (1:1.5:3) [with graded stone aggregate 10 mm
nominal size] and admixture of water proofing compound as
per manufacturer's specification followed by two coat of
polymer based paint, (1st coat after 4 to 5 days of concrete
laying and 2 nd coat just before brick masonry work) as
directed (cost of water proofing compound & polymer based
paint to be paid separately).( Chequering not required over
concrete or painted surface).
[Note: - Waterproofing as per item 9, polymer based paint as
per item 8 (a) of subhead C of Section (C).
371.76
65002
174.85
Painting block letters or digits in Black Japan or any approved paint as per direction. Size above f) Size above 10 cm. and upto 12.5 cm
1080
15120
14
h) Size above 15 cm. and upto 20 cm.
360
5760
16
Cutting holes and subsequent mending good
damages
(b) Diameter exceeding 150 mm. but not
exceeding 300 mm. (i) In brick work [Cement-6.0 Kg/Mtr]
1376
209152
152
S&P WORKS.
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole
cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1)
with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial
stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of
Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code..
(v) For 100 users. (a)With Pakur variety. (SAIL/TATA/RINL)
45
4738187
105293.05
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry
brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick
work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with
20mm thick cement plastering (1:4) to inside face upto the depth of cement brick
work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L.
and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling
bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size)
including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone
chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C.
manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover
slab with necessary fittings, making nacessary arrangements for pipe connections,
excavation of well including shoring, dewatering and removing the exess earth from
the premises as per direction complete in all respect with all costs of labour and
materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and
1.00m inside dia.
(Other than SAIL/TATA/RINL)
45
696980
15488.45
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm
(depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides,
bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips
over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside
walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,
providing necessary invert with cement concrete (1:3:6) with stone chips as per
direction, neat cement finishing to entire internal surfaces, top of the pit covered with
100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements
upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external
surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make
supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in
excavation in all sorts of soil, filling sides of the pit with earth and removing spoils
after work complete in all respect with all costs of labour and materials.
i) With Pakur variety (JSW/ JSPL/ SHYAM)
270
1772406
6564.47
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.
C) 1500 litre capacity
180
1411200
7840
Labour for hoisting plastic water storage tank
. i) Upto 1500 litre capacity.
180
40500
225
Labour for punching hole in plastic water storage tank upto 50 mm dia.
540
10260
19
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. A) (i) Single Socketed 3 Meter Length. B)110 mm
4536
1324512
292
ii)Double Socketed 1.8 Meter Length. B)110 mm
1296
410832
317
vii)Double Socketed 0.60 Meter Length. B)110mm
863
290831
337
b)Fittings.
Viii) Double Y with Door. B)110mm
720
248400
345
xxi)110 X 110 P Trap. B)75 mm
1440
404640
281
xi)Door Bend (T.S.). B) 110 mm
720
105840
147
xv) Vent Cowl. B) 110 mm
360
11880
33
x)Bend 87.5º. B) 110 mm
720
86400
120
iii)Door Tee. B)110 mm
1440
280800
195
xviii)W.C. Connector (450 mm long) W / lipring. B)75 mm
720
199440
277
Solvent Cement 250 ML
45
4635
103
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary
specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total
pipeline including specials.
(A) Above ground. b)110mm.
3636
210888
58
Double socketed 1.8 Meter Length. B)110mm.
1296
75168
58
vii) Double socketed 0.60 Meter Length. B)110mm.
863
50054
58
b)Under ground. B)110mm
900
78300
87
Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth. 150 mm
1350
450900
334
100 mm.
450
132300
294
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap. i)580 mm X 440 mm
720
1161360
1613
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to
I.S. specification with P.V.C. fittings complete,C.I. brackets including two
coats of painting to bracket etc.
720
730800
1015
Wash basin vitreous china of approved make (without fittings)
supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood
blocks and C.I. brackets including two coats of painting of C.I. brackets.
(i) 450 mm X 300 mm size
720
831600
1155
iii)630 mm X 450 mm size
720
1753200
2435
Best quality sink in mosaic in silver grey colourwith C.P. waste and other
fittings, rubber plug and chain, C.I. heavy brackets with two coats of
approved paint ii) 600 mm X 450 mm X 250 mm
720
609120
846
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white
flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
ii) 450 mm long.
1440
118080
82
iii)600 mm long.
720
77040
107
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,
with PVC coupling at one end fitted with necessary clamps.
ii) 900 mm long.
2160
162000
75
Supplying, fitting and fixing pillar cock of approved make
b)PTMT Pillar Cock - 15 mm. (Prayag or equivalent).
1440
319680
222
Supplying, fitting and fixing Waste fittings complete.
B) Polythene. i)32 mm
2160
95040
44
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80
(medium duty) conforming to ASTMD - 1785 and threaded to match with
GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,
specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,
reducing socket, reducing tee, short piece etc. fitted with holder bats
clamps, including cutting pipes, making threads,fitting, fixing etc.
complete in all respect including cost of all necessary fittings as
required,jointing materials and two coats of painting with approved paint
in any position above ground. (Payment will be made on the centre line
measurements of total pipe line including all specials. No separate
payment will be made for accesories, specials. Payment for painting will
be made seperately)
(a) For Exposed Work
PVC Pipes
(Dia)
15 mm
6696
676296
101
20 mm
1296
167184
129
25 mm
1080
191160
177
40 mm Basin outlet. inlet pipe
3600
1051200
292
50 mm
2484
953856
384
Supplying, fitting and fixing Peet's valve fullway gunmetal standard
pattern best quality of approved brand bearing I.S.I. marking with fittings
(tested to 21 kg per sq. cm.).
(iv) 50 mm dia
360
850320
2362
40 mm
90
148140
1646
20 mm
720
473040
657
Supplying, fitting and fixing shower of approved brand and make.
g) PTMT overhead shower ( Prayag or equivalent)
ii) 150 mm round. 150 mm round.
720
244800
340
Supplying, fitting & fixing Aluminium domical grating.
ii)125 mm
3600
201600
56
Supplying, fitting and fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)
15 mm
3600
554400
154
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red
as per I.S. 3438 / 1965 together with brass C.P. hinges.
(i) 450 mm X 300 mm
720
264240
367
ii)600 mm X 450 mm
720
348480
484
Supplying, fitting and fixing towel rail with two brackets. B)Aluminium. ii)25 mm dia. and 600 mm long.
1440
236160
164
SCHOOL BUILDING
Earth work in excavation of foundation trenches or
drains, in all sorts of soil (including mixed soil but
excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
488.64
58280
11927
(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring
24.43
4699
19238
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
(a) With earth obtained from excavation of foundation.
97.73
7577
7754
A) Filling in foundation or plinth by silver sand in
layers not exceeding 150 mm as directed and
consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
227.2
118389
52107
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches
225
5400
24
Cement concrete with graded jhama khoa (30 mm size) excluding shuttering
In ground floor and foundation.
(a) 1:3:6 proportion
28.18
133604
4740.77
Batch Mixed concrete of M 25 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in computerised batching plant under controlled condition
using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of
concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification and direction
of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all accessories vibrators etc. inclusive of all other
incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through
separate item. Consumption of cement will not be less than 300 Kg of cement per cubic meter of controlled concrete but actual consumption will be
determined on the basis of preliminary test and job mix foumula. [Cement to be supplied by Deptt, if Cement is supplied by agency then item rate to be
deduced as per Format A of Annexure I]
[with Batching Plant & transit mixer]
In Ground Floor& Foundation. [Pakur Variety](In Ground Floor)
280.35
1572561
5609.32
1st floor
116.49
664501
5704.32
2nd floor
116.49
675568
5799.32
3rd floor
48.32
284813
5894.32
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and
removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing
and direction.
II)JSW/JSPL/SHYAM (Ground Floor)
44.02
2401616
54563.59
1st floor
18.29
1006747
55043.59
2nd floor
18.29
1015526
55523.59
3rd floor
7.59
422567
55703.59
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
534.6
173209
324
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm
nominal size) excluding shuttering and reinforcement,if any, in ground floor
as per relevant IS codes.
a) Pakur Variety
(In Ground Floor)
54.46
257113
4721.14
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal
size) excluding shuttering and reinforcement,if any, in gound floor as per
relevant IS codes.
Pakur variety
(In Ground Floor)
22.97
110012
4789.39
Brick work with 1st class modular bricks.
B) With cement mortar (1:6)
(i) In foundation and plinth
49.45
235728
4767.01
200 mm. thick Brick work with Fly Ash Bricks set in cement sand mortar (1:6)
including raking out joints, curing, scaffolding etc. complete in all respect.
(a) In ground floor
84.42
386312
4576.08
1st floor
84.42
395683
4687.08
2nd floor
84.42
405053
4798.08
3rd floor
28.95
142127
4909.08
100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4)
including raking out joints, curing, scaffolding etc. complete in all respect.
(a) In ground floor
328.16
172293
525.03
1st floor
328.16
175575
535.03
2nd floor
434.31
236711
545.03
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar (c) 15 mm thick plaster
1743.38
232827
133.55
1st floor
1652.93
227359
137.55
2nd floor
1909.83
270335
141.55
3rd floor
248.08
36108
145.55
ii) With 1:4 cement mortar
C) 10 mm thick plaster. (Ground Floor)
459.34
55373
120.55
1st floor
459.34
57210
124.55
2nd floor
459.34
59048
128.55
3rd floor
74.61
9888
132.55
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,
lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)
(f) 25 mm to 30 mm shuttering without staging in foundation
524.28
171963
328
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering
in any concrete work
In ground floor
875.27
317723
363
1st floor
759.35
289313
381
2nd floor
759.35
302981
399
3rd floor
178.02
74232
417
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including
smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.
In ground floor.
3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).
Using grey cement
(iii) 35 mm. thick. (Ground Floor)
459.34
143870
313.21
1st floor
459.34
146029
317.91
2nd floor
459.34
148188
322.61
3rd floor
74.61
24418
327.31
White washing including cleaning and smoothening surface thoroughly.
All floors :
(c) Three coats (on new works only).
5043
100910
20.01
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly
(plastered or concrete surface) as per manufacturer's specification.
In Ground floor:
iii) Two Coats. (Ground Floor)
587.93
28808
49
1st floor
497.48
24729
49.71
2nd floor
648.23
32683
50.42
3rd floor
124.04
6342
51.13
PVC Door Shutter-37 mm thick:
Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C.
multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical
section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and
other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with
2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with
both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and
tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower
bolt,door ring etc.
In ground floor.
17.33
39622
2287
1st floor
17.33
39864
2301
2nd floor
17.33
40107
2315
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish)
made of extruded P.V.C. multichamber hollow section having dimensions 60mm x
50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section
by galvanised steel screws after inserting two number steel brackets as
reinforcement making suitable space for placing hinges, one steel tube 40mm x
20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side)
as reinforcement, the frame will then be fixed in the opening with the help of
P.V.C. expandable fastner/wooden gutties and galvanised steel screws including
cost of all materials and labour, hire charges of tools and appliances, carriage of
all materials, taxes and all other incidental charges complete.
In ground floor
54.45
15191
279
1st floor
54.45
15191
279
2nd floor
54.45
15191
279
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,
fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and
plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment
for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd
floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.
0.12
8712
72603
Supplying solid flush type doors of commercial quality, the timber frame
consisting of top and bottom rails and side styles of well seasoned timber 65mm
wide each and the entire frame fitted with 37.5mm wide battens places both ways
in order to make the door of solid core and internal lipping with Garjan or
similar wood veneers using phenol formaldehyde as glue etc. complete, including
fitting, fixing shutters in position but excluding the cost of hinges and other
fittings in ground floor.
(a) 35 mm thick shutters (single leaf) In ground Floor
31.08
82641
2659
1st floor
31.08
83076
2673
2nd floor
31.08
83511
2687
3rd floor
6.3
17016
2701
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. viii) 100mm. X 75mm. X 3.50mm. (Ground Floor)
135
8910
66
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. C) 300mm long. (Gr. Floor)
45
7470
166
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: vi) 200mm long x 10mm dia. bolt. (Gr. Floor)
45
3510
78
iii)100mm long x 10mm dia. bolt. (Gr. Floor)
66
3498
53
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
(a) With continuous plate base (Hexagonal/ Round rod)
(ii) 100 mm grip x 10 mm dia rod.
99
6138
62
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming. 100 mm grip x 10 mm dia rod. (Ground Floor)
45
3105
69
(i) 75 mm grip x 10 mm dia rod
33
2013
61
Door stopper (Brass) in all floors
45
3150
70
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,
handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20
mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
(Add extra @ 1.2 % for each additional floors upto 4th floor and @ 1.5% for each addl. Floor above 4th floor.)
In Ground floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of
workmanship)
Without integrated grills.
b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
In Ground Floor
55.53
122110
2199
1st floor
55.53
123575
2225.39
2nd floor
55.53
125041
2251.78
3rd floor
11.52
26244
2278.17
(viii) M.S. integrated grill as per approved design integrated with
steel window or ventilator, joints continuously welded with M.S. flats
and bars. (Ground Floor)
995.76
66715
67
(iv) Two point nose steel handle including fitting and fixing.
252
8568
34
(vi) steel peg stay 300 mm long including fitting and fixing
252
6300
25
a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr)
b) Extra for work in grill gate.
(I) For hanging and locking arrangements including supply of materials and labour complete.
14.28
162380
11371.2
1st floor
14.28
164004
11484.91
2nd floor
14.28
165628
11598.62
(A) Supplying fitting and fixing door frame with M.S. angle as per drawing &
direction of required section.The holes for counter sunk machine screw & nuts
will be such as to fit 8 to 10 mm Iron screw. The counter sunk nut to be welded .
The nuts are to be welded after careful checking with screw.All welding spots
should be properly filed or rounded smooth including cost of welding hinges for
hinge cleats , lugs for hasp bolt, socket bolt etc. and necessary M.S. clamps of
25mm x 6mm flat 225mm long as per direction welded to the frame fitted and
fixed in position excluding cost of concrete.
1500
118500
79
b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
258.8
9834
38
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
445.92
12931
29
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(a) On timber or plastered surface :
With super gloss (hi-gloss) -
(iv) Two coats (with any shade except white)
258.8
20963
81
(b) On steel or other metal surface :
With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
445.92
35227
79
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (Ground Floor)
178.11
95466
536
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
73.5
18448
251
Plain Tee. 110 mm. Dia.
7
1204
172
Bend 87.5 degree. 110 mm. Dia.
7
980
140
Shoe 110 mm. Dia.
7
777
111
Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm.
dia rod complete including mending damages. Payment for damage and
repair to be made separately
In ground floor
5
500
100
1st floor
5
500
100
2nd floor
5
500
100
(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having
adhesive & waterproofing properties by mixing in proportion (1 liquid: 4
cementitious material) or as per manufacturer's specification for water
proofing layer in water tank etc. (No Departmental Cement is required)
459.34
118050
257
Extra rate for using water proofing and plasticising admixture @ 0.2% by
weight of cement (or at manufacturer's specified rate) for concrete of various
grades.
14.55
1731
119
Extra rate for adding Polyester Fibre anti shrinkage material @ 0.25% by weight of cement [or as per Manufacturer's Specification]
18.18
7526
414
S&P Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole
cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1)
with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial
stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of
Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
(v) For 100 users
A) With Pakur variety. JSW/ JSPL/ SHYAM
2
210586
105293.05
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick
work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size)
including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone
chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C.
manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover
slab with necessary fittings, making nacessary arrangements for pipe connections,
excavation of well including shoring, dewatering and removing the exess earth from
the premises as per direction complete in all respect with all costs of labour and
materials.
With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and
1.00m inside dia JSW/ JSPL/ SHYAM
2
30976
15488.45
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm
(depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides,
bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips
over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside
walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,
providing necessary invert with cement concrete (1:3:6) with stone chips as per
direction, neat cement finishing to entire internal surfaces, top of the pit covered with
100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements
upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external
surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make
supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in
excavation in all sorts of soil, filling sides of the pit with earth and removing spoils
after work complete in all respect with all costs of labour and materials. With Pakur variety. JSW/ JSPL/ SHYAM
10
65644
6564.47
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. C)1500 litre capacity
4
31360
7840
Labour for hoisting plastic water storage tank. i) Upto 1500 litre capacity
4
900
225
Labour for punching hole in plastic water storage tank upto 50 mm dia.
12
228
19
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Meter Length 110 mm
115.5
33726
292
Double Socketed 0.60 Meter Length. 110mm
20
6740
337
110 X 110 P Trap. 75 mm
8
2248
281
Door Bend (T.S.). 110 mm
10
1470
147
Vent Cowl. 110 mm
11
363
33
Bend 87.5º. 110 mm
10
1200
120
Door Tee. 110 mm
10
1950
195
Cross Tee with door. 110mm
20
4780
239
Solvent Cement 250 ML
50
5150
103
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary
specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat
clamps (any floor) or for underground work including cutting trenches upto
1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total
pipeline including specials.
(A) Above ground
110mm.
120
6960
58
Under ground. 110mm
15
1305
87
Supplying, fitting and fixing Orissa pattern water closet in white glazed
vitreous chinaware of approved make in position complete excluding 'P' or
'S' trap (excluding cost of concrete for fixing).
(i) 580 mm X 440 mm
iii) 150 mm
20
6680
334
Supplying, fitting and fixing Orissa pattern water closet in white glazed
vitreous chinaware of approved make in position complete excluding 'P' or
'S' trap (excluding cost of concrete for fixing).
(i) 580 mm X 440 mm
12
19356
1613
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to
I.S. specification with P.V.C. fittings complete,C.I. brackets including two
coats of painting to bracket etc.
12
12180
1015
Wash basin vitreous china of approved make (without fittings)
supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood
blocks and C.I. brackets including two coats of painting of C.I. brackets.
iii) 630 mm X 450 mm size.
12
29220
2435
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white
flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia
ii) 450 mm long.
12
984
82
iii) 600 mm long.
12
1284
107
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,
with PVC coupling at one end fitted with necessary clamps.
ii) 900 mm long.
12
900
75
Supplying, fitting and fixing pillar cock of approved make-
b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).
12
2664
222
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80
(medium duty) conforming to ASTMD - 1785 and threaded to match with
GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,
specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,
reducing socket, reducing tee, short piece etc. fitted with holder bats
clamps, including cutting pipes, making threads,fitting, fixing etc.
complete in all respect including cost of all necessary fittings as
required,jointing materials and two coats of painting with approved paint
in any position above ground. (Payment will be made on the centre line
measurements of total pipe line including all specials. No separate
payment will be made for accesories, specials. Payment for painting will
be made seperately)
(a) For Exposed Work
PVC Pipes
(Dia)
15 mm
100
10100
101
20 mm
20
2580
129
25 mm
15
2655
177
40 mm Basin outlet. inlet pipe
50
14600
292
50 mm
25
9600
384
Supplying, fitting and fixing Peet's valve fullway gunmetal standard
pattern best quality of approved brand bearing I.S.I. marking with fittings
(tested to 21 kg per sq. cm.)
iv)50mm dia
4
9448
2362
40mm dia
4
6584
1646
20mm dia
10
6570
657
Supplying, fitting and fixing bib cock or stop cock
e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)
15 mm
22
3388
154
Supplying, fitting and fixing Aluminium Domical gratting of 125 mm
18
1008
56
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white
vitreous chinaware of approved make in position with brass screws on 75
mm X 75 mm X 75 mm wooden blocks complete.
470mmX280mmX340mm
6
5670
945
Supplying, fitting and fixing Squating plate with integral flushing in white
vitreous chinaware of approved make in cement concrete (6:3:1) with
jhama chips complete. (Payment of concrete will be paid seperately).
(i) 450 mm X 350 mm
6
5286
881
Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125
mm with(b) Porcelain of approved make.
12
2568
214
Supplying, fitting and fixing urinal flush pipe fittings of approved brand.
(a) C.P. urinal flush pipe fittings range of one
24
9936
414
Supplying, fitting and fixing Half round channel with or without outlet as
required set in cement concrete (6:3:1) with jhama chips complete.
(Payment of concrete will be paid seperately).
(i) 600 mm X 100 mm
(a) Salt glazed stone ware
36
4464
124
ELECTRICAL PART
Supply & Fixing 1200 x 1000 mm Angle Iron frame made from 35 x 35 x 5 mm MS Angle and 35 x 5 mm MS Flat with 6 nos. 150 mm leg fixed on wall 75 mm above wall incl. S/F of 1200 x 1000 x 25 mm thick wooden Ply Board for fixing 8 nos. DPMCB & supply meter incl.all.fixing materials.
90
404910
4499
Supplying & fixing 415V 100/125A 4 bar copper sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)
45
122734
2727.44
Supplying & Fixing following Four pole MCB on existing wooden board. 400V 63A.
135
211356
1565.6
230V 32A, SPMCB
720
128296
178.19
Supplying and fixing 2 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB on existing frame incl. connection & provision for earthing attachment (Make - Legrand / ABB/Schneider/Havells).
765
212746
278.1
Supplying and fixing 240/415 V 32A DPMCB of Breaking capacity 10 KA & "C" characteristics on din rail of existing enclosure and necessary connection. (Make - Legrand / ABB/Schneider/Havells).
765
376640
492.34
Supply & Laying 2x6 Sq.mm copper wire for meter loop (Make: Havells/ Finolex) .
1800
196524
109.18
Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge 25 mm dia 3 mm thick polythene pipe without earth continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.
10080
1152446
114.33
Supplying and Drawing 1.1 KV 2x84/0.3 (6 Sq.mm) + 1x56/0.3 (4 Sq.mm) as ECC single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.
10080
1443153
143.17
Supplying and fixing 19 mm dia 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction).
8100
300348
37.08
Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 19 mm dia 3 mm thick polythene pipe without earth continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.
21600
1935576
89.61
Supplying and Drawing 1.1 KV 3x22/0.3 (1.5 Sq.mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (Make: Havells/ Finolex).
21600
1067904
49.44
Supply & Fixing 2x5A flash type plug socket with switch on 175 x 100 x 65 mm MS board & bakelite top cover complete with all accessories concealed in wall.
1440
476107
330.63
Distn. wiring by 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish.
(Avg. run 6 mtrs.)
9675
7095258
733.36
Distn. wiring in 22/0.3 (1.5 sq. mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (On Board).
2160
169084
78.28
Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.
720
151286
210.12
Supply & Fixing 240 V, 20 A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.
720
212839
295.61
Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19 mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5 sq. mm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (For 15 A plug point).
6480
1081252
166.86
Supplying & Fixing 100 mm x100 mm x 65 mm sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.
90
9733
108.15
Supply & Fixing 100 mm x 100 mm bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required.
90
3244
36.05
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.
765
21274
27.81
Supply & Fixing angular batten holder (Anchor) on 75 mm dia PVC round block / round bakelite on wall/ceiling.
45
1761
39.14
Supplying and fixing double-door 2+6 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make - Legrand / ABB/Schneider/Havells).
720
795736
1105.19
Supplying and fixing 240/415 V 40 A DPMCB Isolator on din rail of existing DBs and necessary connection (Make - Legrand / ABB/Schneider/Havells).
720
154252
214.24
Supplying and fixing 240/415 V 6-32A SPMCB of Breaking capacity 10 KA & "C" characteristics on din rail of existing DBs and necessary connection (Make - Legrand / ABB/Schneider/Havells).
4320
747532
173.04
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.
1440
323337
224.54
Excavation of soil for installation of Earth Electrode and filling & ramming in soft soil.
22.5
4982
221.45
Earthing with 50 mm dia. GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia. GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe.
90
126906
1410.07
Equipment earthing by 10 SWG GI wire.
2160
13348
6.18
Supply & Fixing 15/16 W LED light fittings for stair case lighting (Make:Philips/Havells/Crompton)
315
53282
169.15
SCHOOL BUILDING (ELECTRICAL WORKS)
Supplying and fixing double door, 8 way Vertical TPN MCB Distribution box with 80 A Four pole MCCB as incomer and 8 nos. 40 A TP MCB as outgour with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link &provision for earthing attachment incl. S&F of 2 nos. cable end box (Make: Legrand/Schneider/L&T).
1
22813
22813
Supplying and fixing 415 V, (16-32) A per way, 4 way Horizontal TPN MCBDB with SS enclosure double door with IP-42/43 protection with 40 A Four Pole Isolator as incommer and (6-32) A SPMCBs ("C" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment incl. S&F of 2 nos. cable end box. (Make: Legrand/Schneider/L&T).
6
44514
7419
Supplying and fixing 240 V, (6-10) A per way, 2+8 way SPN MCBDB with SS enclosure double door with IP-42/43 protection with 32 A DP Isolator as incommer and (6-32) A SPMCBs ("C" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make: Legrand/Schneider/L&T).
12
33972
2831
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (Make: Havells/Finolex) 4 x 80/0.4 (10 sqmm) + 2 x 84/0.3 (6 sqmm) as ECC. (VTPN to HTPN).
55
27940
508
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) as ECC. (HTPN to SPNDB, AC).
75
7350
98
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) as ECC. (For Power Plug).
80
5360
67
3 x 22/0.3 (1.5 sqmm)
90
4410
49
Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 10 sq. mm copper wire
2
22
11
6 sq. mm copper wire
12
108
9
4 sq. mm copper wire
27
189
7
2.5 sq. mm copper wire
15
90
6
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR'
PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (Average run 6 mtrs.).
40
32120
803
(Average run 8 mtrs.).
289
286399
991
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. On Board
42
3276
78
Average run 4.5 mtrs.
10
7050
705
Supply & Fixing 240 V, 20 A, plug socket with separate 20 A
Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S&F150x100x65 mm MS (16SWG) switch board and bakelite/ perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
10
2960
296
Supply & Fixing 240 V, 2 nos. 6 A & 2 nos. 20 A plug socket with separate 2 nos. 6 A & 2 nos. 20 A Piano key type switch, indicator & 20 A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S&F 240x200x65 mm MS (16 SWG) switch board and bakelite/ perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (Computer Board).
10
5920
592
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc.
93
22599
243
Supply & Fixing 240 V, 25 A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25 A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. S & F single bracket fitting incl. S & F 14 Watt CFL. (Make: Approved make)
6
6468
1078
S & F single bracket fitting incl. S & F 14 Watt CFL. (Make: Approved make).
6
5256
876
Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8 watt CFL / 100 watts GLS lamp complete set.
8
4768
596
Fixing only 18/20 Watt single/twin LED luminaire suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125 mm x 125 mm) 6 mm thick and 25 mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5 sq. mm.) flexible copper wire of 1.10 mt. length.
151
30955
205
Fixing only 18/20 W single LED light fitting complete with all
accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.
15
1335
89
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sq. mm flexible copper wire
93
6324
68
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991).
93
23157
249
Supply & Fixing exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection incl. Supply & Fixing of GI louver shutter on wall with necy. bolts & nuts (6 mm dia. x 62 mm long) of following sizes : 230 mm (9"), 1370 r.p.m. (Make: EPC)
12
27180
2265
Supply & Fixing exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection incl. Supply & Fixing of GI louver shutter on wall with necy. bolts & nuts (6 mm dia. x 62 mm long) of following sizes : 300 mm (12"), 1420 r.p.m. (Make: EPC
6
22308
3718
Supply & Fixing 400 mm dia. cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia. x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length (Make: Crompton, WMSDX 120).
4
8984
2246
Supplying and fixing 415V, 100 A, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc. incl. S & F 3 nos. DIN type HRC fuse as per rating (Make: L & T).
1
5852
5852
Supplying and Laying of 1.1 KV Gr. 4 core 50 sq. mm XLPE/A Al. cable on wall/surface including S&F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. (Main switch to VTPN). (Make: Havells/Gloster/Nicco/Polycab).
10
4820
482
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 core 50 sq. mm XLPE/PVC armoured cables.
2
334
167
Finishing the end of 4 core 50 sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
2
430
215
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.
long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia. GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. By TATA-Medium GI pipe
2
3140
1570
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
10
1610
161
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 8 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
20
180
9
Sub Total
1
188559702
1000
GST 18%
1
33940746
10800
CESS 1%
1
2225004
1008
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements