Housing Directorate Tender

Third floor

Dismantliing artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 mm. Ground floor

First Floor

Second Floor

Third floor

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Ground floor (a) Area of each tile up to 0.09 sq.m (i) colours decorative.

First Floor

Second Floor

Third floor

Wall Ground floor

First Floor

Second Floor

Third floor

Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. (a) slab thickness 20 to 25 mm Ground floor

First Floor

Second Floor

Third floor

Scraping and removing greasy soot from walls or ceiling of kitchen or similar smoke affected rooms and preparing the surface.

White washing including cleaning and smoothening surface thoroughly. (b) two coats

Colour washing with "ELLA" with a coat of white wash priming including cleaning and smoothening surface thoroughly : (i) Internal (all floors) (b) two coats

Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.

PVC Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliances. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: iv) 150mm long x 10mm dia. bolt.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (iii) 75 x 45 x 2.5mm.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: ii) 100 mm grip x 10 mm dia rod.

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m

Labour for dismanlting G.I. pipe with fittings 15mm

20 mm

Labour for fitting and fixing G.I. pipes above ground (concealed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately.)

Dismantling sink with brackets with or without waste fitings (ii) above 450 mm and upto 600 mm length

Dismantling Indian W.C including taking out base concrete as necessary

Foot rest for Indian pattern water closet (A) Dismantling

Supplying fittings and fixing stainless steel sink complete with wate fittins and two coats of painting of C.I. Brackets (a) Sinko inly 630 mm x 550 mm x 180mm

Supplying, fittins and fixing CPVC (Clorinated polyvinly Chloride) pipes of approved make conforming to IS-15778:2007. with all necessary, specials viz, socket, bend tee, union, cross, nipple, longscrew, reducing socket, reducing tee, short. 15 mm

20 mm

Supplying, fitting and fixing 10 mtr. PVC low-down cistern conforming ot IS specification with PVC fittings complete, CI brackets including two coats of painting to brackets etc.

Supplying, fittings and fixing approved brand PVC connector white flesiable with both ends coupling with heavy brass CP nut, 15 mm dia. (ii) 450 mm long

(iii) 600 mm long

Supplying, fitting and fixing approved brand 32 mm dia PVC waste pipe, with PVC coupling at one end fitted necessary clamps. (iii) 900 mm long

Supplying, fittins and fixing CI bracket includig two coats of painting (b) sink, drain board.

Supplying , fitting and fixing pillar cock of approved make a) (i) CP pillar cock-15mm (Equivalent to code no. 507 & model tropical/sumthing special ESSO or similar brand)

Supplying, fitting and fixing CI round grating. 150mm

W.C. connector (150 mm long) 125 x 110(W/W.C. Ring)75mm

Suppling, fitting and fixing Orissa pattern water closed in white glazedvitreous chinwater of approved make in postion completed excluding 'p' or 'S' trap ( excluding cost of concerete for fixing) 530 mm x 410 mm

Supplying fitting and fixing bevelled deged mirror 5.5 mm thick silver red as per I.S 3438/1965 together with brass C.P. hings. 450 mm x 300 mm

Supplying, fittings and fixing soap holder (a) PTMT (Prayag or equivalent)

Supplyig, fitting and fixing towel rail with two brackets. (b) Aluminium (ii) 25 mm dia and 600 mm long

Supplying, fitting and fixing bib cock or stop cock (e) PTMP (Polytetra bib cock/stop cock (prayag or equivalent) 15 mm

Supplying, fitting and fixing shower of approved brand and make (g) PTMT overhead shower (Prayag or equivalent) (i) 75 mm round.

Supply fitting and fixing closet of approved make with lid and C.P hings, rubber and brass screws (B) Anglo Indian (ii) plastic (hallow type) white