Himalayan Mountaineering Institute Tender

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces.

S & F 'D' type Service bracket fabricated from MS Angle size 50x50x6 mm thick with porcelain shackle insulator directly on wall by MS nuts, bolts, washers etc as required on site.

M & L for PVC/XLPE 4 core insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm complete all as specified . Make Havells

Drawing of 4 Core 25 Sqmm PVC/XLPE insulated aluminium cable suspended on GI wire including supplying and errection of 6 SWG GI (Hot Dip) wire with galvanised (hot dip) clamp from pole to existing bracket and biding with suitable size GI wire complete all as specified and as directed.

Drawing of 4 Core 35 Sqmm PVC/XLPE insulated aluminium cable suspended on GI wire including supplying and errection of 6 SWG GI (Hot Dip) wire with galvanised (hot dip) clamp from pole to existing bracket and biding with suitable size GI wire complete all as specified and as directed.

Laying of 3 to 3.5 Core 35 Sqmm to 50 Sq.mm aluminium cable on wall/surface including supply and fixing mild steel saddles with earthing attachment in 2 x 10 SWG GI (Hot dip) wire making holes etc as necessary mending the good damages and painting complete.

Laying of 4 Core 35 Sqmm aluminium cable on wall/surface including supply and fixing mild steel saddles with earthing attachment in 2 x 10 SWG GI (Hot dip) wire making holes etc as necessary mending the good damages and painting complete.

S & F compression type gland complete with brass gland, brass ring and rubber ring for dust and moisture proof entry of PVC/XLPE armoured cables 4 Core 35 Sqmm.

Supply installation commission and testing of Out door LT Panel board Kiosk type of suitable size ,LT415 Volts, 50 Hz , 3-phase, Bus Bar chamber comprising 4 Nos aluminium strip bus bars shall be mounted on DMC/epoxy insulator of capacity 400 Amps with colour coding with selector switch 03 Nos,digital ammeter 0 to 200 amps with selector switch, digital volt meter 500V with selector switch and LED type/Neon type Indicating lamps panel mounting type RYB-3 Nos, factory assembled, outdoor type weather and vermin proof (Protection Class IP-54) made out of not less than 60 X 60 X 6 mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet with front hinged opening, rubber lining, locking arrangement, powder coating paint (RAL-7032) after preperation of surface in 08 tank sheet process externally and internally complete comprising of following (Feeder pillar for parking terminals) :- (a) Internal wiring with single core copper conductor cable/ PVC Insulated Copper Strip of suitable size incoming to bus bar and bus bar to outgoing MCCB/MCB-1Job. (b) Fine wiring with single core copper conductor cable for instruments/indicating lamps-1 Job. INCOMING MCCB 250 Amp, 4 Pole , 415 Volts rating with overload short circuit fault protection 3 phase with neutral link specically fixed for incomming supply (breaking capacity 25 KA ) Ics=100%Icu -01 (Make Legrand Cat Part No 420219, or equivalent in L&T/Havells) OUTGOING a)MCCB 100 Amp, 4 Pole , 415 Volts rating with overload short circuit fault protection 3 phase with neutral link specically fixed for incomming supply (breaking capacity 25 KA ) Ics=100%Icu -03Nos (Make Legrand Cat Part No 420055 or equivalent in L&T/Havells) b) MCCB 63 Amp, 4 Pole , 415 Volts rating with overload short circuit fault protection 3 phase with neutral link specically fixed for incomming supply (breaking capacity 16 KA ) Ics=100%Icu -02 Nos (Make Legrand Cat Part No 420013 or equivalent in L&T/Havells) c) MCCB 40Amp, 4 Pole , 415 Volts rating with overload short circuit fault protection 3 phase with neutral link specically fixed for incomming supply (breaking capacity 16 KA ) Ics=100%Icu -02Nos (Make Legrand Cat Part No 420012 or equivalent in L&T/Havells) d) Digital Volt meter with selector switch (L&T) -01 set e) Digital Amp meter with selector switch (L&T) -01 set f)LED Indicator Lamp RYB with protection fuse 5A Make: of MCCB's Shall be - Legrand or equivalent L&T/Siemens/ Havells Note - Fixing arrangement diagram and line diagram of the panel shall be got approved by accepting officer before panel fabrication.

M & L for finish the end of PVC/XLPE armoured cable by Compression/crimping type sleeve joints for jointing conductors/ jumper connections including treatment with conducting jelly including supplying and fxing solderless socket (Dowels make) tapes,, anticorrosive pastes and jointing materials complete all as specifed.

M&L for Point wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 1.5 Sq mm size in and including 25 mm PVC casing caping of required width including one No. 1.5 Sq mm single core PVC insulated copper cable for continuous earth wire connected to earth dolly for one light point and one fan point controlled by one 5 Amp switch one way & and making good disturbed surface of walls & floors etc complete.

M&L for Point wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 1.5 Sq mm size in and including 25 mm PVC casing caping of required width including one No. 1.5 Sq mm single core PVC insulated copper cable for continuous earth wire connected to earth dolly for one light point controlled by one 5 Amp two way switch & and making good disturbed surface of walls & floors etc complete.

M&L for Point wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 1.5 Sq mm size in and including 25 mmPVC casing caping of required width including one No. 1.5 Sq mm single core PVC insulated copper cable for continuous earth wire connected to earth dolly for one 3/5 Pin, 5 Amp socket outlet on the independent board & and making good disturbed surface of walls & floors etc complete.

M&L for Point wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 1.5 Sq mm size in and including 25 mm PVC casing caping of required width including one No. 1.5 Sq mm single core PVC insulated copper cable for continuous earth wire connected to earth dolly for one 3/5 Pin, 5 Amp socket outlet with other switches on the Same board & and making good disturbed surface of walls & floors etc.complete.

M&L for Point wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 1.5 Sq mm size in and including 25 mm PVC casing caping of required width including one No. 1.5 Sq mm single core PVC insulated copper cable for continuous earth wire connected to earth dolly for one 3/5 Pin, 5 Amp socket outlet on the independent board & one 5 Amps socket outlet on same board and making good disturbed surface of walls & floors etc.complete.

M&L for Point wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 2.5 Sq mm size in and including 25 mm PVC casing caping of required width including one No. 2.5 Sq mm single core PVC insulated copper cable for continuous earth wire connected to earth dolly for one 3/6 Pin, 15 Amp socket out let on the independent board & and making good disturbed surface of walls & floors etc.complete.

M & L Switchs modular 1 module single pole one way 6 Amp, 240 volt all as specified.

S & F Switchs modular 1 module single pole 6 Amp, two way 240 volt all as specified.

M & L for Modular Switch 16 Amp 1 Module type universal, 240 volts, complete as directed.

M & L for Modular Socket 16 Amp 6A - 2/3 pin 2 Module type universal, 240 volts, complete as directed.

M & L for Modular Socket outlet 6A - 2/3 pin 2 Module , 240 volts, complete as directed.

S & F White cover plate with frame 2 module complete as dircted.

S & F White cover plate with frame 4 module complete as dircted.

S & F White cover plate with frame 6 module complete as dircted.

S & F plastic Surface boxes Modular type 1/2 module Make Legrand Cat No 673302 or equivalent in Anchor Roma L&T Indoasian

S & F plastic Surface boxes Modular type 4 module Make Legrand Cat No 673304 or equivalent in Anchor Roma L&T Indoasian

S & F plastic Surface boxes Modular type 6 module Make Legrand Cat No 673306 or equivalent in Anchor Roma L&T Indoasian

M & L for Ceiling rose, 3 Phase/PVC/polycarbonate, isolated body, 3 terminals and 24 Volts complete all as specified as directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

S & F wall mounted 4 feet long LED Tube light fitting 18 Watts 6500K including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including LED tube rod complete all as specified and directed. Make Crompton - CAT PT No- LTT8-16 (Tube Rod ) + DMLN1LT8-16 (Batten) or equivalent to Bajaj/Syska/Philips/Havells

S & F wall mounted 2 feet long LED Tube light fitting 10 Watts 6500K including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including LED tube rod complete all as specified and directed. Make Crompton - CAT PT No- LTT8-16 (Tube Rod ) + DMLN1LT8-16 (Batten) or equivalent to Bajaj/Syska/Philips/Havells

S & F sleek LED mirror light fitting 05 watt complete all as specified and directed by Engr -in- charge. Make : Crompton -LDL-05-CDL or equivalent model of Philips/Bajaj/Havells etc.

S & F 18 watt LED fancy light on wall / ceiling surfaces with accessories as per manufacturers complete all as per sample approved by Campus Supdt. Make Havells/Philips

S & F 18 watt LED fancy type tube light on wall / ceiling surfaces with accessories as per manufacturers complete all as per sample approved by Campus Supdt. Make Havells/Philips

S & F LED bulb 12 watt of make Bajaj/Philips/Havells

S & F LED Building Security light fitting 30 watt complete all as specified and directed. Make : Crompton Cat Pt No-LSTS-30-CDL-M or equivalent model of Philips/havells etc.

Material and labour Sub main wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 4 x 10 Sq mm size in and including 25 mm PVC rigid conduit 'FR' of required width including two Nos. 6 Sq mm single core PVC insulated copper cable for continuous earth wire all as specified.

Material and labour Sub main wiring with PVC un-sheathed and PVC insulated cable with stranded copper conductor cable 2 x 6 Sq mm size in and including 25 mm PVC casing caping of required width including one No. 4 Sq mm single core PVC insulated copper cable for continuous earth wire all as specified.

All as per Ser item No above but with 2 x 2.5 Sqmm for phase & neutral and 1 x 1.5 Sqmm for earth continuity single core copper conductor.

S & F double door Vertical TPN MCB distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall and mending good the damages to original finish including inter connection with suitable size of copper wire and neutral link and provision for earthing attachment (FOR LIGHT LOAD AND POWER LOAD) upto 160 A 4 Way, with 1 No 63 A FP MCCB, 4 Nos 40 A TP MCBs. Make - L&T / Seimens/Legrand/Schneider

S & F double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall and mending good the damages to original finish including inter connection with suitable size of copper wire and neutral link and provision for earthing attachment. 4 Way with 1 No FP 63 A Isolator, 12 Nos 6 -32 A SP MCB. Make - L&T/Legrand/Seimens/Schneider

S & F double door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall and mending good the damges to original finish including inter connection with suitable size of copper wire and neutral link and provision for earthing attachment. 2 + 10 Way with 1 No DP isolator 40 Amp and 10 Nos MCB 6-32 Amp. Make - L&T/Legrand/Seimens/Schneider

S & F double door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall and mending good the damges to original finish including inter connection with suitable size of copper wire and neutral link and provision for earthing attachment. 2 + 12 Way with 1 No DP isolator 40 Amp and 12 Nos MCB 6-32 Amp. Make - L&T/Legrand/Seimens/Schneider

S & F 240 Volt AC buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified.

Supply and fix exhaust fan with for protection when not in use silent operation rust proof body and blades with fixing arrangements of size 300mm seeep 1400 rpm including cutting and preparation of hole in brick wall and plaster complete . Make : Havells/Bajaj

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 3 phase 415 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

Earthing with copper plate 610x610x3mm size having weight of 9.84kg and 1 No 25x5mm copper steel (3.2m long) and 1 No 6 sqmm PVC insulated stranded copper wire (054 Mtr long) including supplying and fixing 15mm dia GI pipe production to be filled with bitumen partly under the ground level and partly above the ground level to an average depth of 3.65mtr below the ground level and restoring the surface duly rammed incluidng providing 3 Mtr long 25mm dia GI pipe for periodic treatment including providing masonary enclusure on the top of earth electrode of overall size 86.36x86.36x46cm deep below ground level complete cement work with brick and cement mortar, inside CI hinged inspection cover size 36.56x36.56cm with locking arrangement, galvanised iron reducer and treatment of soil by using salt and charcoal.

Supply and fix 100 Amp change over swith complete as per manufactuers instruction of make Havells/L&T/Legrand

M & L for excavation in trenches not exceeting 1.5 Mtr wide and not Exceding 1.5 Mtr in depth and getting out in soft/loose soil for laying cables all as directed .

M & L for returning, filling in including spreading, levelling, watering and ramming in layers not exc. 25 cms.

M & L for removing excavated material not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as directed.

Supply and fill dry river sand in trenches for cable cushioning.

Supply and laying of old size Fly Ash Bricks laid flat equal to width of bricks, perpendicular to UG cable over the dry sand cushioning, for cable protection as directed by Engineer-in-Charge.

M & L for laying of GI Pipe (ISI Marked) 25mm bore (dia) light grade for protection of UG Cable, laid under Floors or Road Crossing, fixing to Pole with and including Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and as directed.

M & L for laying of GI Pipe (ISI Marked) 80 mm bore (dia) light grade for protection of UG Cable, laid under Floors or Road Crossing, fixing to Pole with and including Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and as directed.

M&L for cutting existing road/hard standing not exc 20x20cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finished suraface of depth not less than 12 cm from top using PCC 1:3:6, type C-2 (using 40mm graded aggregate); including removal of surplus soil complete all as specified and as directed.

S & F LED Gate light fitting 20 watt complete all as specified and directed. Make : crompton Cat Pt No-LPTH-20-WW or equivalent model of Philips/Havells etc.

S & F LED Garden light fitting 10watt LED Bollard warm white IP 65 rated complete all as specified and directed. Make : crompton Cat Pt No- LBLTW-10-WW or equivalent model of Philips/havells etc.

Material and labour for 3mm thick wall care putty whereever required for wall/ceillig etc with one coat of primer complete all as specified and as directed by Campus Supdt. Note : The contractor may please be include the rate of necessary scaffolding for execution of work at any height. Make - Asian/JK/Birla

Material and Labour for preparation of old decorated surfaces of any description and applying one coat of plastic emulsion paint (1st quality) of desired shade with roller finish including cleaning complete all as specified and directed by Campus Superintendant, HMI Darjeeling. Note : The contractor may please be include the rate of necessary scaffolding for execution of work at any height. Make : Asian/Berger/Nerolac

Material and labour for preparation of old wooden or wood based wall surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint (Ist quality) of desired shade including cleaning complete all as specified and directed. Note : The contractor may please be include the rate of necessary scaffolding for execution of work at any height. Make - Asian – Apcolite, Berger – Luxol, Shalimar - Superlac