Health And Family Welfare Department Tender
... More
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Health And Family Welfare Department - HFWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date18 Nov 2024
Closing Date2 Dec 2024
Tender Amount₹ 38,77,872
Costs
EMD
₹ 77,557Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Dhfws/dd/niet/ 3264, Date-12.11.2024
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HFW_769878_1Tender No
NIT3264Tender Authority
Health And Family Welfare Department ViewPurchaser Address
-Website
http://https://www.wbhealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Health and Wellness Centre (HWC Type-A) at Maildanga
BOQ Items
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
a) With earth obtained from excavation of foundation.
16.82
77
1304
... More
A) Filling in foundation or plinth by silver sand in
layers not exceeding 150 mm as directed and
consolidating the same by thorough saturation with water, ramming complete including the cost of supplyof sand. (payment to be made on measurement of finished quantity)
49.02
487
23891
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
212
24
5088
... More
Pre-Constructional Anti-termite measures:
a) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.)
66.84
110
7353
... More
b) Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS- 6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated).
76.44
137
10472
... More
25mm. thick damp proof course with cement concrete with
stone chips (1:1.5:3) [with graded stone aggregate 10 mm
nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of
polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
[Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C).
3.53
206
726
... More
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.
181.31
324
58744
... More
Cement concrete (1:3:6 proportion) with graded stone ballast (40 mm. size) excluding shuttering. a) [Pakur Variety] i) In Ground floor
9.48
5441
51580
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor
as per relevant IS codes.
a) [Pakur Variety]
i) In Ground floor
5.01
5745
28804
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes
a) M-20 grade with Pakur variety
i) In ground floor and foundation.
38.83
6247
242609
... More
i)In First floor
17.72
6342
112407
... More
ii) In Secon Floor
3.38
6437
21766
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.a) Other Than Sail/tata i) In foundation & ground floor
4.57
57410
262483
... More
ii) In first floor
2.09
57840
120714
... More
ii) In second floor
0.4
58270
23192
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. c) Steel shuttering or 9 to 12 mm. thick approved quality ply board shuttering in any concrete work. i) In foundation & ground floor
284.54
363
103288
... More
ii) In first floor
171.65
381
65397
... More
iii) In 2nd Floor
40.28
399
16071
... More
Brick work with 1st class Bricks with cement morter (1:6). (a) In foundation and plinth
12
4919
59036
... More
(b) In superstructure, ground floor
16.28
5142
83717
... More
(c) In first floor
16.67
5253
87594
... More
(d) in 2nd floor
5.56
5364
29833
... More
125 mm. thick brick work with 1st class bricks in cement mortar (4:1) i) In ground floor
89.81
674
60565
... More
ii) In first floor
64.93
686
44563
... More
iii) In 2nd Floor
29.77
698
20790
... More
Labour for Chipping of concrete surface before taking up
Plastering work.
128.75
21
2704
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary.a) 20 mm. thick plaster (6:1) i) In ground floor
137.65
162
22381
... More
ii) In first floor
117.86
166
19633
... More
iii) In 2nd Floor
111.16
170
18963
... More
b) 15 mm. thick plaster (6:1) i) In ground floor
309.38
141
43752
... More
ii) In first floor
287.44
145
41800
... More
iii) In 2nd Floor
15.52
149
2319
... More
c) 10 mm. thick plaster (4:1)i) In ground floor
58.93
126
7453
... More
ii) In first floor
57.38
130
7486
... More
iii) In 2nd Floor
12.44
134
1673
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
19.65
32
643
... More
Artificial stone in floor, dado, staircase etc with cement
concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement i) In ground floor
3.38
264
892
... More
iii) In 2nd Floor
58.91
271
16021
... More
Extra cost of labour over grey artificial stone for (i) Chequering
58.91
15
884
... More
Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various
grades.
19.64
119
2337
... More
Supplying and laying true to line and level vitrified tiles of
approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other
incidental charges complete true to the manufacturer's
specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e)
I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand
cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour
105.64
1276
134793
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0
kg/Sq.m]
40.74
1017
41427
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &
finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor- With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick
cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.- (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative
10.53
745
7845
... More
(B) Wall-With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m - (i) Coloured decorative
57.33
750
42998
... More
Rendering the surface of walls and ceiling with white cement based wall putty (thickness not less than 1.5 mm.) i) In ground floor
368.31
122
44934
... More
ii) In first floor
344.82
122
42317
... More
iii) In 2nd Floor
27.96
123
3451
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.
a) Two coats
741.09
70
51876
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured( matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
a) Two coats-i) In ground floor
137.65
45
6208
... More
ii) In first floor
117.86
45
5399
... More
iii) In 2nd Floor
111.16
46
5171
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.a) Two coats i)Super Protective 100% Acrylic Emulsion. i) In ground floor
137.65
97
13352
... More
ii) In first floor
117.86
97
11516
... More
iii) In 2nd Floor
111.16
98
10941
... More
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x
50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of
P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.
14.85
279
4143
... More
PVC 26 Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt /tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc.
In ground floor. i) In ground floor
3.15
2287
7204
... More
ii) In first floor
1.58
2301
3624
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.i) In ground floor
4.73
4330
20459
... More
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. iii)In 2nd Floor
0.47
10292
4868
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs .(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. i) In ground floor
1.93
9888
19084
... More
i) in first floor
2.32
9986
23150
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel
GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)
10.41
9077
94446
... More
Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smooth ening surfaces by sand papering etc.
25.43
29
737
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary with super gloss (hi-gloss) -b) On steel or other metal surface : i) Two coats (with any shade except white)
25.43
79
2009
... More
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fixing of glass (excluding cost of glass) all complete as per architectural fitting & fixing of aluminium 2-track/3-track sliding window with drawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing film. i) Natural White-a) 2-track sliding window + b) 3-track sliding window
93.06
448
41691
... More
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical),glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc)
10-12 Micron thickness Annodizing film Natural white
213.57
385
82224
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished
conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work). i) Top, bottom and side member
7.2
183
1318
... More
ii) Louvered Section
3.24
658
2132
... More
iii) Cleat angle ( Non-annodized)
3.24
263
852
... More
i) Top, bottom and side member.
9
321
2889
... More
ii) Mullion.
9
339
3051
... More
iii) Glazing clip.
1.62
50
81
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100x75x4.00 mm
66
93
6138
... More
Supplying 4 lever mortice lock of any approved make and brand as per direction of the Engineer-in-Charge. (a) 100 mm
11
212
2332
... More
Labour charges for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units(iv) fixed glazing
1.62
768
1244
... More
(v) Louvered window
1.08
730
788
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. i) 4mm thick clear glass.
12.42
398
4942
... More
viii) 8mm thick coloured / tinted / smoke glass.
6.28
907
5698
... More
Providing, fitting and fixing in position, medium density fibre board conforming to IS: 12406-1988 for plain and IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade and Phenol Formaldehyde for exterior grade conforming to per IS:848-1974 as per approved make and brand as per direction of Engineer-in-Charge.i) In Ground Floor
6.31
880
5553
... More
ii) In First Floor
3.96
894
3538
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (iv) 125 mm grip x 10 mm dia rod.
22
95
2090
... More
Anodized aluminum barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (vii) 225mm long x 10mm dia. Bolt
11
84
924
... More
(iv) 150mm long x 10mm dia. bolt.
11
63
693
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting (b) 250mm long.
11
159
1749
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete
structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes: (ii) 110 mm. Dia.
18.7
251
4694
... More
(ii) 110 mm. Dia.
3
172
516
... More
(ii) 110 mm. Dia
3
223
669
... More
(ii) 110 mm. Dia.
3
140
420
... More
(ii) 110 mm. Dia.
3
111
333
... More
Design, Fabrication, Supply, Delivery (factory to health facility) and Fixing of Vinayl Printed Signage/Display board ( Size of board 4 X 5 sqft - 1 nos. .) , fabricated with 16 SWG rectangular MS angle / flat iron structure. Facia to be made of 1.5 mm ACP sheet and Logo, Color,lettering style etc. will be made as per approved specification which is to be digitally printed on Vinayl sheet by computerized inscription. Vinayl printed sheet to be fixed on ACP sheet. Ready signage to be fixed on wall/roof by 50x50 mm angle iron or as per site requirement incl. The matter is to be done as per approved specification. Non-Schedule. As per rate analysis.
2
8680
17360
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately- 40 mm
12
292
3504
... More
15 mm
35
137
4795
... More
20 mm
25
158
3950
... More
25 mm
7
205
1435
... More
supplying ,fitting and fixing peets valve fullway gunmetal standard pattern best quality of approved brand bearing isi markings with fittings (tested to 21 kg per sq.cm) (ix)15 mm dia
2
521
1042
... More
viii) 20mm
4
657
2628
... More
(vii) 25 mm dia
2
912
1824
... More
Supplying, fitting and fixing bib cock or stop cock. (a)i) chromium plated bib cock short body (equivalent to code no. 511 & model- tropical./ sumthing special of ESSCO or similar brand)
3
539
1617
... More
(d)i) chromium plated angular stop cock with wall flange (equivalent to code no. 5053 & model- Florentine of Jaquar or similar brand)
7
815
5705
... More
Supplying P.V.C water storage tank of approved quality with closed top with lid(black)-Multilayer. (c) 1500 litre capacity
1
7840
7840
... More
Labour for hoisting plastic water storage tank.
1
139
139
... More
Supplying fitting & fixing 10 ltr. PVC low down cistern conforming to I.S specification with PVC fittings complete C.I brackets including two coats of painting to bracket etc.
3
1015
3045
... More
Labour for punching hole in plastic water storage tank up to 50 mm dia.
2
19
38
... More
Supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,
C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved
quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats of
approved paint. ii) 550 mm X 400 mm size
6
2208
13248
... More
(iv) Angle back wash basin 400 mm X 400 mm
1
2034
2034
... More
Supplying, fitting and fixing stainless steel sink complete with waste
fittings and two coats of painting of C.I. brackets.530 mm X 430 mm x 180 mm
3
3285
9855
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P.nut,15 mm dia.i) 450mm long
3
82
246
... More
Suppling fitting & fixing approved brand 32mm dia p.v.c waste pipe with p.v.c coupling at one end fitted with necessary clamps i)900mm long
10
75
750
... More
Suppling fitting & fixing 15 mm swan neck tap with left & right hand operating knob with aerator.
3
811
2433
... More
Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -
Tropical / Sumthing Special of ESSCO or similar brand).
7
555
3885
... More
Suppling fitting & fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 m depth in all sorts of soil both mixed or un mixed and refilling (but excluding concerting at bottam and sides)
i)150 mm.
24
334
8016
... More
Suppling fitting & fixing with cement jointing (3:1)with jute gasket soaked in cement mortar. ii)150 mm
4
350
1400
... More
b)stoneware single T & Y junction ii)150 mm
4
447
1788
... More
Suppling fitting & fixing c.i round grating i)100mm
9
62
558
... More
Supply of UPVC pipes (B type )& fitting conforming to IS 13592-1992 b)110 mm
40
292
11680
... More
(ii) Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (ii) 110 mm dia.
16
57
912
... More
A) Above ground (ii) 110 mm dia.
24
84
2016
... More
B) FITTINGS- Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992-b) 110 mm
2
345
690
... More
xi) door bend ( T.S.)-b) 110 mm
10
147
1470
... More
xv) vent cowl -(b) 110mm
1
33
33
... More
xvi) pipe clip ---(b) 110 mm
12
21
252
... More
(ii) Plain Tee ---(b) 110 mm
6
85
510
... More
Suppling fitting & fixing E.W.C in white glazed vitreous china ware of approved make supplied fittied complete in position with necessary bolts nuts.etc. a)with 'P' trap
3
1421
4263
... More
Supplying fitting & fixing squating plate with integral flushing in white vitreous chinaware of approvedmake in cement concrete (6:3:1) with jhama chips complete. i)450mm X350mm
2
881
1762
... More
Supplying fitting & fixing closet seat of approved make with lid & C.P hinges,rubber beffer & brush screw complete. (a) E.W.C. (ii) Plastic (hallow type) white
3
380
1140
... More
Supplying fitting & fixing 32 mm. dia. flush pipe of approved make with necessary fixing materials & clam complete. i)Polythene flush pipe.
3
155
465
... More
(i) Supplying, fitting and fixing liquid soap container c) fibre glass
6
188
1128
... More
Supplying fitting & fixing best quality indian make mirror 5.5 mm thk. With silvering as per I.S.I specification supported on fibre glass frame of any colour,frame size 550mm x 400mm
6
613
3678
... More
Supplying fitting & fixing towel rail with two brackets.a)C.P over brush---
i)25mm dia,450 mm long.
3
384
1152
... More
constructing inspection pit of inside measurement 600mm x600mm x upto 600mm (depth) with 250mm th. 1st. Class brick work in cement mortar(1:4) on all sides bottom of the pit consisting of 100 mm th. Cement concrete (1:3:6) with stone chips over a layer of jhama brick fklat soling, 15 mm thk. (4:1) cement plaster to bottom of the pit providing necessary invert with cement concrete (1:3:6) with stone chips as per direction ,neat cement finishing to entire internal surface top of the pit convered with 100 mmth. R.CC slab (1:1.5:3) with stone chips and necessary reinforcement upto 1% and shuttering including 6mm thk.cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia .R.C.C manhole cover of approved make supplied ,fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth removing spoils after work complete in all respect with all costs of labour and materials.
i) With pakur variety (SAIL/TATA/RINL)
1
6648
6648
... More
Construction of circular soak well 2.5 m deep inall types of sandy soils with dry brick work upto 1:6 m from the bottom having 150mm intermediate cement brick work(1:4) band all round and cement brick work (1:4) upto .90m from top with 20mm thk. Cement plastering (4:1) to inside face upto the depth of cement brick work, 15 mm th.cement plaster (1:4)on outer face from top of the well upto G.L and 6mm thk. cement plaster (1:4) on top of the R.C.C cover slab including filling bottom 1.0m of inside of the well with brick metal (501mm to 63mm size) including R.CCcover slab of designed thk. with cement concrete b(1:1.5:3) with stone chips with necessary. reinforcement and shuttering including one 560 mmdia .R.CC manhole cover(heavy type) of approved make supplied ,fittings making necessary arrangements for pipe connections ,excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.a)with 250mm thk.dry brick work and 250 mm thk. cement brick work (6:1) and 1.00 m inside dia.
For-SAIL/TATA/RINL
1
15692
15692
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C.........(ii) For 20 users- (A) With Pakur Variety (SAIL/TATA/RINL)
1
45540
45540
... More
Cement concrete with graded stone balast ( 40mm size excluding shuttering ) in ground floor (A) Pakur variety (a) 1:3:6 Poportion
1
5441
5442
... More
Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (i) 50 mm dia. boring etc.
160
287
45920
... More
(ii) 100 mm dia. boring etc. top enlargement
40
426
17040
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). PVC Pipes (i) 50 mm
150
282
42300
... More
(ii) 100 mm
40
874
34960
... More
Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (iv) 50 mm dia.
10
532
5320
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.- Deduction
3.32
2029
6730
... More
Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.
0.14
417
59
... More
Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (ii) 50 mm dia.
1
189
189
... More
Supplying, fitting and fixing plug of approved make conforming to I.S. specifications. (ii) 50 mm dia.
1
71
71
... More
Supplying, fitting and fixing heavy type bell mouth reducing socket. (i) 50 mm X 100 mm
1
455
455
... More
Supplying, fitting and fixing G.I. cap at top (i) 100 mm
1
139
139
... More
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with ......
2
7538
15076
... More
Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete
1
916
916
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
1231
1231
... More
Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.
2
2235
4470
... More
Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report.
1
8247
8247
... More
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (d) (ii) 32 mm dia. medium quality
20
355
7100
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
vii) 25mm Dia
2
778
1556
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately - 32mm
15
236
3540
... More
Supply and delivery of 1 Ph. 230V, 2 HP submersible pump motor set (Model:-4W32RD2C, 2 H.P.) Make - Crompton Greaves/CRI/Siemens in all respect including taxes and duties as per specification and direction of EIC.
1
27136
27136
... More
Lowering, Installation and Commisioning of submersible pump motor set to the existing bore well after taking delivery of the pump as directed with necessary electrical works, fittings etc. Excluding the cost of pump, cable and starter but including cost of carriage, labour, tools and plants, taxes as applicable as per satisfaction and direction of EIC.
1
2500
2500
... More
Supplying, delivery & Installation of Submersible Starter Panel (L &T Make) with appropriate overload and overcurrent protection.
1
6500
6500
... More
Supplying and delivery and fixing of 2.5 sq. mm. 3 core flat PVC cable (Finolex or equivalent) for submersible pump motor set.
35
123
4307
... More
Supplying and fixing C.I water proof looping cable box having hinged top cover having 4mm thick with rubber gasket living railway type mechanical locking arrangement earthing terminal with lug etc of size 8"x6"x4" comprising 3 Nos 15amps Kit-Kat fuse unit and housing the same in pole muffing
1
458
458
... More
SUB-HEAD I :- INTERNAL WIRING Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC-Average run 8 mtr
64
967
61888
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light point with 2 no. 2 way piano key type switch fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [PVC casingcapping on surface and Switch board concealed] Average run 9 mtr
2
1027
2054
... More
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
30
48
1440
... More
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [Separate 20A Plug Point]
150
65
9750
... More
2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [Separate 6+20A Plug Point]
45
95
4275
... More
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [Sub main wiring and UPS]
90
139
12510
... More
CONDUIT PIPE-Supplying and fixing polythene pipe complete with fittings as necy.. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction). 19mm dia 3mm thick Polythene Pipe
104
36
3744
... More
25mm dia 3mm thick Polythene Pipe
50
49
2450
... More
19 mm dia 3 mm thick polythene pipe without earth continuity wire
121
87
10527
... More
25 mm dia 3 mm thick polythene pipe without earth continuity wire
40
111
4440
... More
20x10mm Size
10
32
320
... More
25x10mm Size
10
35
350
... More
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 sqmm
36
6
216
... More
4 sqmm
31
7
217
... More
6 sqmm
30
9
270
... More
SWITCH BOARDS- Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish- On Board
19
76
1444
... More
Average run 6 mtr (Separate 6A Switch Board)
15
836
12540
... More
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [Separate 20A Switch Board]
6
287
1722
... More
Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [CPU Board]
4
669
2676
... More
Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [Power Point]
3
822
2466
... More
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 25A Modular switch (Brand approved by EIC) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [UPS Board]
2
535
1070
... More
Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy.
Connections. [UPS Board]
2
129
258
... More
SUB HEAD II:-DISTRIBUTION BOARDS/BUSBAR/MAIN SWITCH - 32A DP [Standard/HPL/Havells Make]
1
1277
1277
... More
2 bars 240 V, 63 A
1
1682
1682
... More
32A,240V DP, Make - Standard/HPL/Havells
1
1441
1441
... More
2+4 way [EDB 1] (607710)
1
1186
1186
... More
2+8 way [Ground & 1st Floor, NDB 2 & 3] (607711)
2
1477
2954
... More
2+12 way [Ground & 1st Floor, EDB 2 & 3] (607712)
2
1757
3514
... More
4 Way [NDB 1]
1
316
316
... More
Single pole 6-32A MCB [SPNDB Outgoing]
40
190
7600
... More
Single pole 25A MCB [EDB1 Outgoing]
2
190
380
... More
Double pole 32A MCB [EDB1,NDB 2,3]
3
546
1638
... More
Double pole 32A MCB [UPS]
2
546
1092
... More
Double pole 25A MCB [EDB 2,3 Incomer]
2
546
1092
... More
Double pole 32A MCB [NDB 1-4Way]
2
546
1092
... More
SUB-HEAD III :- SUPPLY & FIXING OF FANS- Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.
13
236
3068
... More
Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.
13
174
2262
... More
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire.
13
66
858
... More
30 cm (12")
3
329
987
... More
30 cm Exhaust fan (12")
3
193
579
... More
Supplying & Fixing 240 V AC Buzzer (Ancho) on HW board incl. S&F HW board
2
124
248
... More
SUPPLY OF FANS- Supply & delivery of Sweep:- 48" (1200mm) AC ceiling fan, 50-70 Watts, Speed:-=350 RPM, Air delivery:-=220 CMM, make: (Orient PSPO NEWBREEZE or SUMMERCOOL / equivalent of EPC or USHA STRIKER PLUS or CROMPTON [Approved by EIC]
13
2712
35257
... More
Supply & delivery of heavy duty Exhaust Fan of Sweep:-12" (300mm), 240 volt, 50 Hz, AC , 50-60 Watts, Speed 900 RPM, Air delivery =1145 CMM suitable for . [Make - Orient(Model:Power Flow) /EPC/Havells/Crompton Greaves]
[Approved by EIC]
3
2139
6418
... More
SUBHEAD IV:-SUPPLY AND LAYING OF CABLE- Supplying of 1.1 KV. Grade LT power cable, XLPE insulated, cores laid up, PVC inner sheathed aluminium armoured conductor of the following specificaion:- (make: Polycab/Gloster/Havells)
16 sqmm 2 core (A2XWY/A2XFY)
20
172
3453
... More
Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting
20
57
1140
... More
CABLE TERMINATION-Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :-For 2 core upto 16 sqmm
4
115
460
... More
2 core 16 sqmm cable
4
58
232
... More
SUB-HEAD V :- EARTHING:- For Morrum Soil
4.5
286
1287
... More
By TATA-Medium GI pipe [Mains Earthing:2, UPS Neutral:1]
3
1524
4572
... More
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe
3
915
2745
... More
Extra for treatment of soil by using salt & charcoal or coke for plate electrode
3
531
1593
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
5
156
780
... More
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.
30
92
2760
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages- No. 6 SWG
50
13
650
... More
SUB-HEAD VI :- TELEPHONE & DATA POINTS- NETWORKING & TELEPHONE SOCKET Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required
4
197
788
... More
Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required.
6
163
978
... More
CABLE- Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit / in polythene pipe embeded in wall.
72
16
1152
... More
Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.
60
28
1680
... More
20x10mm Size
132
32
4224
... More
SUB-HEAD VI :- SUPPLY & FIXING LED LIGHTING FIXTURE for INTERNAL WORK- Supply & delivery of single 4ft LED tube light fitting incl. 4ft LED tube, 1200 mm, Efficacy= 100 lm/W, THD10%, complete with all accessories. (Mas LEDtube 1200mm) [Philips: TMC 501 P 1xT-LED 22W P3241] or equivalent of Havells, Crompton etc. [Approved by EIC]
26
880
22883
... More
Supply & Delivery of 45 watt LED Outdoor Type Luminiares along with all accessories complete as required Efficacy=110 lm/W, Pole dia.=32 mm Make:-Philips [Model No. BRP 052 LED 045 CW SLMR FG S1 PSU GR] / Crompton-model no-LSTS-45-CDL-M or equivalent of Havells etc. [Approved by EIC]
2
4197
8395
... More
Supply & Delivery at site 9 watt LED Bulb, Efficacy=90 lm/W, Base Cap:-B22 [Make-Crompton] or equivalent of Havells, Philips etc. [Approved by EIC]
20
98
1963
... More
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener
26
100
2600
... More
Fixing only lamp
20
5
100
... More
Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
2
807
1614
... More
Add District Charge 7% on Schedule items of Eletrical works
1
13947
13947
... More
Add GST @ 18% (CGST@9% + SGST@9%) summasion of sl. 1 to 223.
1
585682
585683
... More
Add (Labour welfare cess @ 1%) summasion of sl. 1 to 224 .
1
38394
38395
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements