Haldia Development Authority Tender

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. Pg-10(Bld.), It-1(a & b).

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor P-15(Bld.),It no.[7(b)+14(a)]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor) (ii) With 1:4 cement mortar (a) 20 mm thick plaster P-189(Bld),3rd CORRIGEND It no.1(ii)(a ) & P-193(Bld),It no.1(i)( a) Brick wall surface both faces

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer's specification and as per direction of the EIC. (a) One Coat. P-196(Bld),It no.8(a )

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Normal Acrylic Emulsion. Page- 197(Bld.), Item no. 17(a)

Rewashering stop cock/ bib cock/ push cock/ pillar cock including gland. (i) 15 mm. Page- 26(S&P), Item no. 13(i)

Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar. (i) 15 mm. Page- 27(S&P), Item no. 14(i)

(b)Repair Works:- Supplying, fitting and fixing low-down cistern parts. Page- 38(S&P), Item no. 1 (i) Internal fittings for cistern complete of approved make.

(iv) Rubber Kid

(v) Knob

Cleaning and removing mud upto 2000 litre Water Tank Page- 38(S&P), Item no. 1

Acoustic and Echo proof Arrangement Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with midspan deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fsteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRCvalue 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge.In ground floor.a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U-1520). Pg-162(Bld.), It-06( a ) Stage Top portion Stage both side corridors top portion

Supplying and fitting in all places of wall panelling to all heights and fixing on pre- framed frame work grid with glass wool of 50mm thick having density of 48 Kg per cum. to be inserted into the pre - fabricated slot covered the glass wool by marking cloths treated with Naptha @ 0.07 Ltr.per Sq.m. of cloths. Finally 12.5mm thick gypsum Fulton board having size 595mmX595mm fitted & fixed into the pre-fabricated grid and covered the all perifirial gaps of fulton board by self additive fibre tape with necessary filler if required, complete in all respect as per direction of the Engineer-in-charge. Pg-177(Bld.), It-12 Stage back face Both side corridors rooms wall faces Deduct Doors opening Both side corridors stage wall faces Columns side faces

ELECTRICAL REPAIRING WORKS Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. ECC. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Dismantling of Celling Fan and Repair Services with New Copper Winding wire and Repair the Bearing Repair and refixing.

Dismantling of 600 mm air circular high speed Wall Fan and Repair Services with New Copper Winding wire and Repair the Bearing Repair and refixing.

StellerBright TLED 25W (StellarBright TLED 6500K with batten)Philips Make.

Supply and fixing of LED Tube Mirolta Essential 22W: 2000 lm (6500K – CDL) Philips Make.

Supplying & delivery of 150 Watt LED Flood light with pressure die cast aluminium housing, IP66 protection, road way luminaire with high power LED as per the technical specifications and vendor list of UD & MA attached (Ref: No. 1528(3)-UDMA-13013(99)/3/2020-ESTT-TCP SEC-Dept. of UDMA dated. Kolkata,08.12.2020 150W LED flood lights: Philips- BVP 192 LED 160 CW NB FG PSU GR)

Supplying & delivery of 90 WattLED Street light with pressure die cast aluminium housing, IP66 protection, road way luminaire with high power LED as per the technical specifications and vendor list of UD & MA attached (Ref: No. 1528(3)-UDMA-13013(99)/3/2020-ESTT-TCP SEC-Dept. of UDMA dated. Kolkata,08.12.2020 b) Philips (model no. BRP409 LED 115 CW SLC FG PSU GR V2)

18% GST

1% CESS