Gorkhaland Territorial Administration Tender

(a) With earth obtained from excavation of foundation.

Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling but including ramming.

Cost of stone boulder 150 mm size delivered ans stacked at site.

(I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering.In ground floor.

(B) With N.B variety stone metal.

(a) 1:3:6 proportion.

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes.

(b) River bazree.

Plum Concrete work with 40 % Cement Concrete with 30 mm down graded stone metal and 60% stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any.

(i) (1:3:6) proportion.

Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor).

(a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. .

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.

(a) For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel.

other than SAIL/TATA/RINL/JSW/JSPL/Shyam/SRMB/ISSL/BMASL/Electrosteel

pplyingand laying true to lineand level vitrified tilesof approved brand(size not less than 600mmX600mmX10 mmthick) in floor, skirtingetc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement@2.91Kg./sq M or using polymerised adhesive (6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using1.75Kgof cement per sqMbelow mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles usings oft anddryclothuptomirror finish completeincludingthecostofmaterials, labourandallother incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement,syntheticadhesiveandgroutmaterial tobesupplied by the contrr]e) I

(I) Withapplicationslurry@1.75kg/ Sq.m, 20mmsand cementmortar(1:4)&2mmthickcement slurryatbackside of tiles, 0.2 kg/ Sq.mwhite cement for joint filling with pigment.

(B) Light Colour

Add 18% GST onTotal from Sl. No. 1 to 10 ( RS. 1514795.13)

Add 1% Labour Cess onTotal from Sl. No. 1 to 11 ( RS. 1787458.25)