Gorkhaland Territorial Administration Tender

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering. N.B. Variety(a) 1:3:6 proportion

Ordinary Cement concrete (mix1:1.5:3) with graded stonechips (20mm nominal size)excluding shuttering and reinforcement if any, in groundfloor as per relevant IS codes.(ii ) River Bazree

Hire an labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a)25mm to 30mm thick wooden shuttering a sper decision & direction of Engineer-In-Charge.

125mm. Thick brick work with1st class bricks in cement mortar (1:4) in ground floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removalof looserust (ifnecessary),cuttingtorequisitelength,hookingand bending tocorrect shape, placing inproperpositionandbindingwith16 gaugeblackannealedwireat every intersection, completeasperdrawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel.(a) JSW/JSPL/SHYAM

Plaster(to wall, floor, ceilingetc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar. (a) 20 mm thick plaster

Plaster(to wall, floor, ceilingetc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar. (C) 10 mm thick plaster

Woodwork in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete,Iron Butt Hinges and M.Sclamps.(The quantum should be correted upto three decimals). (c) Sal : Siliguri.

Panel shutters of door and window,as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (Incaseofnon-supply of single plank,penal rate of reduction of 20% wil be made) (ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(B) Sishu, Gamar, Chaap,BAdam,Bhola,Mogra.

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS1038-1975 and manufactured from rolled steel sections conforming to IS7452-1974withnon-friction projecting type,box type hinges,glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cemen tconcrete(1:2:4)with stonechips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b)Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]

(a) M.S.or W.I. Ornamental grill of approved design joints continuouslyweldedwithM.S, W.I. Flats and bars of windows, railingetc. fittedandfixedwithnecessaryscrewsandlugsinground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

SupplyingbestIndiansheetglasspanessetinputtyandfittedandfixed withnailsandputtycomplete. (Inall floorsforinternalwall&upto6 m height for external wall) (ii) 4 mm thick

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)(b) Two Coats (ii) Solvent based interior grade Acrylic Primer

Applying ExteriorgradeAcrylicprimerofapprovedqualityandbrand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsionpaint includingscrapingandpreparingthesurfacethroughly, completeaspermanufacturer'sspecificationandasperdirectionofthe EIC.(b) Two Coats

ApplyingAcrylicEmulsionPaint of approvedmakeandbrandonwalls andceilingincludingsandpaperinginintermediatecoatsincludingputty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality

Plum concrete work with 40% cement concrete with 30 mm downgraded stone metal and 60% stone boulder of size150 mm and above, placed in position as directed excluding shuttering if any. (i) (1:3:6) proportion

Supplyingand laying true to lineand level vitrified tilesof approvedbrand(sizenot less than 600mmX600mmX10 mmthick) in floor, skirtingetc. set in20mmsandcement mortar (1:4)and2mmthickcement slurrybacksideof tiles usingcement@2.91Kg./sqMorusingpolymerisedadhesive (6mmthicklayerapplieddirectlyoverfinishedartificialstone floor/Mosaic etc without any backing course) laid after application slurryusing1.75Kgof cement per sqMbelow mortar only, joints groutedwithadmixtureofwhite cement andcolouringpigment tomatchwithcolourof tiles / epoxy groutmaterialsofapprovedmakeasdirectedandremovalof wax coating of top surface of tiles withwarmwater and polishingthetilesusingsoftanddryclothuptomirror finish completeincludingthecostofmaterials, labourandallother incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement,syntheticadhesiveandgroutmaterial tobesupplied by the contrr]e) (I) Withapplicationslurry@1.75kg/ Sq.m, 20mmsand cementmortar(1:4)&2mmthickcement slurryatbackside of tiles, 0.2 kg/ Sq.mwhite cement for joint filling with pigment. (A) Deep Colour & White

Add GST 18% on Rs. 1961137.78 i.e. total amount over item no. 1 to 22

Add Labour Welfare Cess 1% of Rs 2314142.58 i.e. total amount Item No. 1 to 23