Gorkhaland Territorial Administration Tender

Cement concrete with graded stone ballast (40mm size) excluding shuttering in ground floor or foundation (B)with N.B.variety (a) 1:3:6)

Ordinary cement concrete (mix 1: 1.5 : 3) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes. (b) River bazree.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending to correct shape placing to proper position and binding with16G black annealed wire at every intersection complete as per design and directions. For works in foundation, basement and upto roof of ground floor/upto 4m

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works. 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge (upto roof of ground floor)

125mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor.

Artificial stone in floor, dado, staircase etc. with cement concrete(4:2:1) with stone chips laid in panels as directed, with topping made with ordinary or white cement (as necessary) and marble dust in proportion(1:2) including smooth finish and rounding off corners surface and application of cement slurry before flooring works using cement@ 1.75kg/sq.m all composite including all materials and labour. In ground floor. 3mm thk topping(High polishing grinding on this item is not permitted with ordinary cement. Using grey cement. (25mm thk)

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cuttingholes and mending good damages to match with existing surface complete in all respect excluding glazing. Without integrated girlls. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.[The extra rate admissible for the openable portion only]

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (f) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately). (b) 40mm X 6mm, 200mm Length

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated. (iv) 75 x 63 x 3.2mm.

Anodised Aluminium Barrel / tower/ socket bolt or socket bolt (full-covered from extruded section) conforming to I.S.S. 204/74 and bearing I.S.I. mark fitted & fixed with cadmium plated screws. (ii) 75mm long x 10mm dia. bolt.

Anodised aluminium decorative handle (hoxagonal fluted) of approved fitted and fixed complete. (i) 150mm plate x 10mm dia rod x 12mm hexagonal/fluted.

Supplying fitting ands fixing 30mm thick factory made moduled door shuter consisting of solid core single leaf flash door of 30mm thickness lipped with 15mm [5mmx 3] thick x 30mm wide on one style and top rail and 10 mm [5mmx2] thick x30 mm wide of the other style and botom rails. The inner panel laminate with 2mm thick termit proof water proof and fire resistant moulded PVC sheet with raised panel design in different plain / or Prelam colour on one side after routing the moulded design on flash door and 2mm plain and or Prelam PVC sheet on other side using rubber adhesive on flash door and solvent cement adhesive on the PVC lipping etc complete excluding hardwares as necessary as per direction of engineering -in charge, manufactures specification and drawing. In Ground Floor. (a) Moulded door using 2mm moulded PVC sheet or 2mm etched moulded PVC sheet on one side & 2mm PVC sheet on other side . (b) Ordinary teak wood.

Plaster (to wall,floor ,ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and raking out joints or roughening of concrete surface including throating, nosing and drip course where necessary. (ground floor) with (4:1) cement morter 15 mm Thk. Plaster

Applying exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats

Applying interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. Two coats Water based interior grade Acrylic Primer

Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer. (i) Two Coat ( a ) Normal Acrylic Emulsion

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothening the surface. Two Coats

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. b) On Steel or other Metal Surface with super gloss (hi-gloss) Two coats ( with any shade except white)

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.

Supplying bubble free float glass of approved make and brand. Confirming to IS 2835-1987 Clear, toughened glass conforming to IS: 2553-1992 (part-II) 6mm thick clear glass .

Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (4:1) including two 560 mm dia. R.C.C. manhloe cover of approved make supplied, fitted and fixied in the top slab with necessary fittings, 19 mm thick cement plaster(4:1) with neat cement finish to the internal surfaces and 12 mm thick plaster(4:1) to outside wall upto 200 mm below G.L. floor finished with 25 mm thick grey artificial stone including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils, fliing up the chamber with clear water, removing foreign materialsfrom the chamber and including constructing attached inspection pit as per approved dawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement, complete in all respect as per directon of Engineer-in-Charge. With Bazree (N.B.Variety). B) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL)

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings (ii) Plain Tee / (b) 110 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings x) Bend 87.5º / (b) 110 mm

Supplying, fitting and fixing bib cock or stop cock (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings(tested to 21 kg per sq.cm.). (Note: Item (vii),(viii) and (ix) to be done as per specific direction of the Engineer-in-charge). 25 mm.

Supplying PVC water storage tank of approved quality with closed top weith lid (Black) - Multilayer. 500litre capacity.

Labour for hoisting plastic water storage tank. Upto 1500 litre capacity. Upto 1st story from G.L.

Supplying, fitting and fixing PVC pipes (20mm dia) of approved make of of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes 20 mm dia

Supply of UPVC pipes & fittings conforming to IS-13592-1992 . Fittings. Door Tee. 110 mm dia.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings xv) Vent Cowl 110 mm dia.

Supplying, fitting and fixing cast iron 'P' or 'S' trap conforming to I.S. 3989/1970 and 1729/1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). P' Trap. 100 mm.

Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing). 580 mm long.

Add 18 % GST

Add 18 % Labour Cess