Gorkhaland Territorial Administration Tender

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.

125 mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor

Wood works in doors and windows frames fitted and fixed in position including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and MS clamps.

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor.

Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor.

Plaster (to wall,floor ,ceiling etc. with sand and cement mortar, including rounding off corners or chamfering corners as directed and taking out joints or roughening of concrete surface. ii) with (4:1) cement morter b) 15 mm Thk. Plaster.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (Wall) ii)Other than Coloured decorative including white.

Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials (Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete. (ii) 110mm Dia

Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials (Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete. Bend 87.5 degree : (ii) 110mm Dia

M.S. clamps for fitting doors & windows frames made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction. b) 40mmx6mm above 250 mm upto 350 mm length.

Oxidised Iron butt hinges of approved quality fitted and fixed with steel screws with ISI mark. ix)100 mm x 75 mm x 3.50 mm thk

Oxidised Iron butt hinges of approved quality fitted and fixed with steel screws with ISI mark. ix)75 mm x 60 mm x 3.15 mm thk

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: vii) 150mm grip x 12 mm dia rod

Anodised aluminium skeleton bolt of approved quality manufactured from extruded section confirming to IS specification (IS 204/74) fitted and fixed with cadmium plated screws: 450 mm long x 12mm dia bolt

Anodised aluminium skeleton bolt of approved quality manufactured from extruded section confirming to IS specification (IS 204/74) fitted and fixed with cadmium plated screws: 300 mm long x 12mm dia bolt

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (v) 150mm long x 12mm dia. bolt.

b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface. Two Coats

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of EIC.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)

PLUMBING AND SANITATION : Labour for fitting and fixing GI pipes above ground (concealed) in structures with holder bats clamps including cost of jointing materials, holder bat clamps etc., as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height

Supplying G.I. Pipe (Tata made) with socket at one end including carriage and all other incidental charges. 15mm dia. Medium (1.57 Kg/m)

Supplying GI plain elbow of approved brand and make. 15mm dia

Supplying fitting fixing Plain Tee of approved make with necessary joining materials. A) 15mm dia

Supplying fitting and fixing white Vitreous china best quality approved make wash basin with CIbrackets on 75mmx75mm wooden blocks CP waste fittings of 32mm dia ,one approved qualitybrass P pillar cock of 15 mm dia CP chain with rubber plug with of 30 mm dia , approved qualityPVC waste pipe with CP nut 32 mm dia , 900 mm long approved quality PVC conection pipe withHeavy brass CP nut including mending good damages and painting the brackets with two coats of approved paint c) 630mmsx450mms size

Pedestal of wash basin of white Vitreous china ware ( rectangular rounded or triangular) of approved make supplied fitted and fixed in position

Supplying fitting fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.

Closet seat of approved make with lid and CP hinges , rubber buffer and brass screws supplied fitted and fixed complete. a) EPWC iv) Bestolite (solid type ) white

Supplying fitting and fixing 10 ltrs PVC low down cistern conforming to IS specification with PVC fittings complete,CI brackets including two coats of painting to bracket etc. White

Supplying fitting fixing mirror 5.5 mm thick with Silvering as per ISI specificationsupported on fibre glass frame. a) Frame size 550 mmx400mm

Supplying fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary.

Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand).

Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting fixing approved brand PVC connector white flexible, with both ends coupling with heavy brass CP nut, 15mm dia.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,bwith PVC coupling at one end fitted with necessary clamps.

Supplying fitting fixing cast iron soil pipe conforming to IS 3989/1970 andIS 1729/1964 bobbins nails etc. including making hole in the wall door etc.cutting trenches in any soil or through masonry concrete if necessary and mending good damages including joint with joining materials and painting two coats to the exposed surface with approved paint complete. a) Valamoid joints including sealing with cement morter(4:1) upto top quarter depth iii) 100mm dia

Supplying, fitting & fixing Cast iron double branch equal with door conforming to I.S. 1729/2002 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). iii) 100mm dia

Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). 100mm dia

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.

Supplying PVC water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 1000 litre capacity