Eastern Railway Tender

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street / Flood / Highbay light fitting will be supplied by Railway )

Supply of Pit Light luminaire of 16-24 Watt LED ( Type of LED - Surface Mounting 5 Device ), pressure die cast housing with Ingress Protection - IP67 or higher ( LED make-Nichia, Osram, Seoul, Philips, Lumileds, Avago, Cree ) complete with all accessories. LED luminaire Efficacy - Minimum 130 Lumens per Watt, Impact Resistance : IK-10 or higher, Color temperature : 5700K, Driver Surge Protection minimum 4KV, Life span of LED chip - Greater than 50000 burnings hours with 60 months warranty suitable for operation on 1Ph, 110V/48V AC, 50 Hz supply system as per site condition. ( Pit Light luminaire similar to Havells-make Model : "Jeta Trench" or equivalent ). ( Make : Philips / Havells / Bajaj / Panasonic )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement.

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 10 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 11 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 225-300 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of MCB DP complete with Metal Enclosure, of capacity 63Amp, 1 Ph, 240V, 50Hz, 10 kA including fixing, connection, testing and commissioning. ( Make of MCB, Metal Enclosure : LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Supply of MCCB, 4 Pole, ( 160 - 400 )Amp, 415V, 50Hz, 50kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short 13 Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication including metal enclosure, internal wiring, fixing, testing and commissioning. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Shifting of Switch Gear of 750V AC supply, coupler LT cables and other electrical items for extension of deep pits.

Supply of LT cubicle type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB, 4 Pole, ( 160 - 400 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 4 nos. b) MCCB, 4 Pole, ( 40 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 2 nos. c) Tinned Copper Busbar (4 Bar) each of capacity 600 Amps., 15 415V, 50 Hz. - 1 set. d) Static Multifunction panel mounting LED Energy Meter suitable for operationon 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. e) CT of rating 250-100/5A / suitable ratio for MFM - 18 nos. f) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 24 nos. complete with petty store, fabrication work, internal wiring by single core copper conductor cable of FRLS grade and all other accessories for above panel board. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of Indoor type 5 KVA, AN-dry type distribution transformer primary voltage 17 415V, secondary voltage 190V/84V AC [P-P] 110V/48V AC[P-N] 3-phase 50Hz, connection vector group Dyn-11 and other fittings and accessories as per IS:1180 copper wound with proper cable end copper lugs connecetion as per CEE' latest specification as per site condition.

Installation, commissioning, testing and connection of 5 KVA indoor type distribution transformer.

Dismantling, shifting, repairing and reinstallation of defective High Mast Tower of 20 Mtr. height with all complete accessories i.e. all integral power tool, control panel, flood light fittings with lantern carriage of High Mast Tower including design and construction of RCC foundation 19 depending upon the height, wind speed and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 20 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard Code of Practice for earthing IS : 3043 - 1987, Reaffirmed - 1996 should be followed ) 21

Goods & Services Tax ( at present @ 18% )