Eastern Railway Tender

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 4 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Disconnection, dismantling and releasing of existing LT overhead conductor bunch ( consisting with four / five / six conductors ) with all other accessories from pole including transportation of released materials from site to store

Dismantling, shifting, repairing and reinstallation of defective High Mast Tower of 20 Mtr. height with all complete accessories i.e. all integral power tool, control panel, flood light fittings with lantern carriage of High Mast Tower including design and construction of RCC foundation 7 depending upon the height, wind speed and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of 8 breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting through suitable dia HDPE pipe including supply of HDPE pipe alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 17 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 18 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 19 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 225-300 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Fixing, connection and commissioning of out door LED Flood light / Street Light fittingon High Mast Tower / Pole / Structure with suitable arrangement. ( LED outdoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 22 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 23 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 24 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 25 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 26 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 27 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 28 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 29 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 30 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing alongwith 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 31 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Extra cost involvement for modular switch, bell push, plug socket, fan regulator, USB point, TV socket etc. with other accessories ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Supply of Indoor LED Trunking light system consisting with extruded aluminium housing ( for 1200 mm length ) with associated accessories and 40 Watt trunk mounted LED luminaire ( Type of LED - Surface Mounting Device ) with industrial grade constant current driver ( 35 Efficiency - Greater than 85% ) with short circuit protection, aluminium housing and milky polycarbonate diffuser ( Make / brand of LED - NICHIA, OSRAM, SEOUL, PHILIPS, LUMILEDS, EVERLIGHT, AVAGO, CREE, LEDNIUM ), LED - Efficacy - greater than 100 Lumens per Watt @ 350mA drive current, LED Life span - Greater than 50000 burning hours with all other accessories suitable for surface / suspended mounting. ( Make : Philips / Havells / Bajaj / Halonix / Panasonic / Magik )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement.

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( Exhaust Fan will be supplied by Railway )

Supply of BLDC Wall Bracket Fan of size 400 mm sweep suitable for operation on 1 Phase, 220-240V, 50Hz supply system with all accessories. ( Make - Atomberg / Usha / Havells / Crompton / Orient )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure.

Installation, connection and commissioning of Air Circulator Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( Air Circulator Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure ), 6 way, 1Ph, 240V, 50Hz, complete with 4 nos. 42 SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 100mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Supply of SPN DB ( Metal Enclosure with Metal Door - IP43 ), 12 way, 1Ph, 240V, 50Hz, 43 complete with 10 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 63A, 100mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure with Metal Door - IP43 ), 3Ph, 4 way perphase, 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 100mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 47 copper busbar of each bar of capacity 100 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 700 x 480 x 48 210 mm (IP-55 ) / equivalent dimension Heavy duty, Outdoor type, UV ray protected, self fire- extinguishing, shock resistance IK08 or above and IP65 degree of protection grade, transparent polycarbonate DB box including fitment with suitable size and shape Mild Steel ( MS ) bracket, testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 450 x 375 x 49 200 mm (IP-55 ) / equivalent dimension Heavy duty, Outdoor type, UV ray protected, self fire- extinguishing, shock resistance IK08 or above and IP65 degree of protection grade, transparent polycarbonate DB box including fitment with suitable size and shape Mild Steel ( MS ) bracket, testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of LT cubicle type Distribution Panel Board for MS Pillar Box with hinged door made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB, FP, 50 320-400A, 415V, 50Hz, 50kA - 1 no. b) MCCB, FP, 80-100A, 415V, 50Hz, 36kA - 6 nos. c) Tinned Copper Busbar ( 4 nos. bar ) each of capacity 600A, 415V, 50Hz - 1 set complete with LED indication for operating status of all breakers and Phases including internal wiring and fabrication ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Installation, connection, testing and commissioning of above pillar box including all incoming and outgoing cable's glanding, termination, socketing, connection and construction of suitable size concrete foundation

Supply of LT cubicle type Distribution Panel Board for MS Pillar Box with hinged door made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB, FP, 52 100-125A, 415V, 50Hz, 36kA - 1 no. b) MCCB, FP, 50-63A, 415V, 50Hz, 36kA - 6 nos. c) Tinned Copper Busbar ( 4 nos. bar ) each of capacity 400A, 415V, 50Hz - 1 set complete with LED indication for operating status of all breakers and Phases including internal wiring and fabrication ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Installation, connection, testing and commissioning of above pillar box including all incoming and outgoing cable's glanding, termination, socketing, connection and construction of suitable size concrete foundation

Supply of Pit Light luminaire of 16-24 Watt LED ( Type of LED - Surface Mounting Device ), pressure die cast housing with Ingress Protection - IP67 or higher ( LED make-Nichia, Osram, Seoul, Philips, Lumileds, Avago, Cree ) complete with all accessories. LED luminaire Efficacy - 54 Minimum 130 Lumens per Watt, Impact Resistance : IK-10 or higher, Color temperature : 5700K, Driver Surge Protection minimum 4KV, Life span of LED chip - Greater than 50000 burnings hours with 60 months warranty suitable for operation on 1Ph, 110V/48V AC, 50 Hz supply system as per site condition. ( Pit Light luminaire similar to Havells-make Model : "Jeta Trench" or equivalent ). ( Make : Philips / Havells / Bajaj / Halonix / Panasonic / Magik )

Fixing, connection, testing and commissioning of Pit Light luminaire along with 2 nos. Fastner FRP Board and copper cable etc.

Wiring of Light point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for three phases and one neutral in GI conduit of 25mm dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Conceal wiring on concrete pit wall through PVC pipe of suitable diameter for submain by two nos single core, HRFR/FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm., 57 1100V grade for phase and neutral along with one single core, HRFR/FRLS grade, PVC insulated, copper conductor cable size 2.5 sq.mm., 1100V grade for Earth Continuty conductor including supply of cable, GI concelled box with modular cover plate, PVC pipe and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Supply of Indoor type 5 KVA, AN-dry type distribution transformer primary voltage 58 415V, secondary voltage 190V/84V AC [P-P] 110V/48V AC[P-N] 3-phase 50Hz, connection vector group Dyn-11 and other fittings and accessories as per IS:1180 copper wound with proper cable end copper lugs connecetion as per CEE' latest specification as per site condition.

Installation, commissioning, testing and connection of 5 KVA indoor type distribution transformer.

Supply of industrial type metal plug and 3 pin socket outlets along with 32A, 240 Volt, DP MCB with Metal Enclosure similar to Make - Hager CAT No. VYA432C or equivalent. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Fixing, connection, testing and commissioning of industrial plug socket with suitable arrangement.

Supply of LT cubicle type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB, 4 Pole, ( 63 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 16 - 40 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 6 nos. c) MCCB, 4 Pole, 125 Amp, 415V, 50Hz, 36kA, without 62 protechtion release, used as Bus Coupler isolation - 1 no. d) Tinned Copper Busbar (4 Bar) each of capacity 150 Amps., 415V, 50 Hz. - 1 set. e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 2 nos. f) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 14 nos.g) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch etc. - 1 job h) Fabrication work with internal wiring for above panel - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 250 KVA to 300 KVA Load :- a) MCCB, 4 Pole, ( 160 - 400 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) 64 Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5)Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. d) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 6 nos. e) MCCB, 4 Pole, 400 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. f) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 6 nos. h) Tinned Copper Busbar (4 Bar) each of capacity 600 Amps., 415V, 50 Hz. - 1 set. i) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 12 nos. j) CT of suitable ratio for MFM - 36 nos. k) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 64 nos.l) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. m) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 66 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard Code of Practice for earthing IS : 3043 - 1987, Reaffirmed - 1996 should be followed ) 67

Goods & Services Tax ( at present @ 18% )