Eastern Railway Tender

Supply, installation, testing and commissioning of exterior rated Architectural LED RGBW flood lighting luminaire suitable for facade lighting with Die-cast aluminum housing, powder- coated finish Clear toughened glass of minimum 3mm thickness, Total System wattage in between 40W to 45W with system lumen output should be more than 2200 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have surface mount base and constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C, Operating Humidity : 10%-90% and complete luminaire shall be IP66 and IK07 rated. Connectors should have IP67 male / female connectors. LED Lifetime shall be at least L70B50 @ 50000 burning hours at 25°C. LED should be with ceramic package of make philips, Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage 240 Vac, 50Hz with power factor is greater than 0.9, THD should be less than 10%. Built in Surge protection : DM 4kV CM 6KV. The luminary to be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5):2013, IEC 60598- 1:2014, IEC 60598-1:2014/ AMD1:2017, IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc as required. (Make of Architectural LED RGBW flood lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies)

Supply, installation, testing and commissioning of exterior rated Architectural LED RGBW Linear lighting luminaire suitable for facade lighting with Die-cast aluminum housing, powder- coated finish Clear toughened glass of minimum 3mm thickness, Total System wattage in between 20W to 30W with system lumen output should be more than 800 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow medium, wide or elliptical as per the site requirement. Fixture should have surface mount base and constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 5 50°C, Operating Humidity : 10%-90% and complete luminaire shall be IP66 and IK07 rated. Connectors should have IP67 male / female connectors. LED Lifetime shall be at least L70B50 @ 50000 burning hours at 25°C. LED should be with ceramic package of make philips, Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated /separate non-integral power supply BIS IP 66/67 potted driver and capable of operating at line voltage 240 Vac, 50Hz with power factor is greater than 0.9, THD should be less than 10%. Built in Surge protection : DM 4kV CM 6KV. The luminary to be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5):2013, IEC 60598 -1:2014, IEC 60598-1:2014/AMD1:2017, IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc as required. (Make of Architectural LED RGBW Linear lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies)

Supply, installation, testing and commissioning of exterior rated Architectural LED RGBW flood lighting luminaire suitable for facade lighting with Die-cast aluminum housing, powder- coated finish Clear toughened glass of minimum 3mm thickness, Total System wattage in between 20W to 30W with system lumen output should be more than 800 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have surface mount base and constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C, Operating Humidity : 10%-90% and complete luminaire shall be IP66 and IK07 rated. Connectors should have IP67 male / female connectors. LED Lifetime shall be at least L70B50 @ 50000 burning hours at 25°C. LED should be with ceramic package of make philips, Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage 240 Vac, 50Hz with power factor is greater than 0.9, THD should be less than 10%. Built in Surge protection : DM 4kV CM 6KV. The luminary to be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5):2013, IEC 60598- 1:2014, IEC 60598-1:2014/ AMD1:2017, IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc as required. (Make of Architectural LED RGBW flood lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies)

Supply, installation, testing and commissioning of exterior rated Architectural LED RGBW Linear /Edge lighting luminaire suitable for facade lighting with Die-cast aluminum housing, powder-coated finish Clear toughened glass of minimum 3mm thickness, Total System wattage in between 10W to 20W with system lumen output should be more than 730 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow medium, wide or elliptical as per the site requirement. Fixture should have surface mount base and constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient 7 temperature range of -20°C to 50°C, Operating Humidity : 10%-90% and complete luminaire shall be IP66 and IK07 rated. Connectors should have IP67 male / female connectors. LED Lifetime shall be at least L70B50 @ 50000 burning hours at 25°C. LED should be with ceramic package of make philips, Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated /separate non-integral power supply BIS IP 66/67 potted driver and capable of operating at line voltage 240 Vac, 50Hz with power factor is greater than 0.9, THD should be less than 10%. Built in Surge protection : DM 4kV CM 6KV. The luminary to be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5):2013, IEC 60598 -1:2014, IEC 60598-1:2014/AMD1:2017, IEC 60598-2- 5:2015, IEC TR 62778:2014 (for LED chips) standards. and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc as required. (Make of Architectural LED RGBW Linear lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies) 8

DMX male supply jumper cable (4 PIN) 9

DMX female supply jumper cable (4 PIN) 10

DMX extension cable (4 PIN) 11

DC/DMX Jumper cable (5 PIN ) 12

DC/DMX Extension cable (5 PIN )

Supply, installation, testing and commissioning of surface mounted exterior-rated LED linear strip light with 70 W to 55W / 5m roll with 450lm/m luminaire with all the necessary accessories as below that is designed for grazing architectural lighting applications waterproof and anti-dust LED strips. It shall be sealed with Glue-injected with polyurethane (PU). SDCM<5 and suitable for RGB lighting, Robust Design & IP67 or higher rating for outdoor use. The luminaire shall be able to deliver minimum 19lx at 8.2 ft from luminaire with a beam width of <30ft in horizontal and < 30ft in vertical plane, it should comply with cone diagram. The luminaire peak intensity shall be minimum 262Cd. Luminaire has input voltage 24VDC, Operating temperature -40°C to 50°C, IP68 & IK06 protection, Lumen maintenance of 30,000 hrs @ L50 at 35°C. (1 no. = 5 m length) with IP67 connector for connecting the RGB LED strip. (Make of surface mounted exterior-rated LED Linear strip light : Philips (Signify) / Panasonic / Havells / Lighting Technologies)

Supply, installation, testing and commissioning of Outdoor LED strip driver of output 24V DC and input voltage 240V AC, 50 Hz. System Wattage 150W,IP 66/67. 15

Supply, installation, testing and commissioning of IP67 Water Proof Junction Box.

Supply, installation, testing and commissioning of Alluminium Profile for LED Strip fixing.

Supply of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & amp: Ethernet .DMX controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of keypad on device for 17 changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions.Device should be equipped with meta; clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment. (Make of DMX Controller: Philips (Signify) / Panasonic / Havells / Lighting Technologies)

Supply, installation, Testing & Commissioning of DMX Addressing Kit for fast and convenient address writing and testing for DMX512 luminaires. The device supports internal test animation for DMX512 addresses verification and is designed to be suitable for a variety of 18 applications. The device can automatically write address to a whole group of interconnecting luminaires within minutes. Miniature industrial design, compact size and touch screen. It can be powered by a power bank with a Micro-B type USB port for on-site programming and testing after installation. (Make of DMX Addressing Kit : Philips (Signify) / Panasonic / Havells / Lighting Technologies)

Supply of DMX Splitter with Input Voltage range 190-240V AC, Power Consumption 5W max. Housing is made of CRCA with powder coated finish Mounting, 19-inch rack mountable,operation Temperature -30°C to +55°C, 8 Output with 3 pin XLR terminal sockets, Ingress Protection Rating 19 IP20. This unit takes the DMX Signal from DMX Controller & split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input. Splitters should be capable to amplify the DMX signal & allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX DMX cable or maximum 20-25 fixture per output channel. To be provided with IP enclosure if installed in external environment. DMX SPLITTER (INK). (Make of DMX Splitter : Philips (Signify) / Panasonic / Havells / Lighting Technologies)

Programming, Testing, Troubleshooting and synchronization of DMX control system. 20 The addressing /programming of fixtures with the multiple scenes (at least 15 Themes) as per instruction of Engineer in charge. Themes may be modified according to the requirement of user during course of time.

Wiring of Mainline by 4 nos. Single core HRFR / FRLS grade PVC insulated, copperconductor cable of size 10 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 22 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 23 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 24 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Supply of TPN MCB DB ( Heavy duty, Outdoor type, UV ray protected, self fire- extinguishing and resistant to abnormal heat and fire up to 650 degree C GWT, shock resistance IK09 25 and IP65 degree of protection grade transparent DB box, similar to ABB Mistral65 - 20 Modules or equivalent ), 3Ph, 50Hz, 415V, 4 way per phase, 415V, 50Hz, complete with total 12 nos. SP MCB of current rating from 6A to 32A, 10 kA, 240 Volt, 50Hz per phase as per requirement of load and one no. FP RCBO 63A, 300mA, 10 kA 415V, 50Hz, Suitable for AC + Pulsating DC (Type A) + Harmonics ( Make - LK (Formerly L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement

Supply of Vertical TPN DB with MCCB Incomer (Metal Enclosure with Metal Door - IP43), 3Ph, 50Hz, 415V, 8 way per phase, 415V 50Hz, complete with total 24 nos. SP MCB of current 27 rating from 6A to 32A, 10 KA, 240 Volt, 50 Hz per phase as per requirement of load and one no. MCCB, 4 Pole, ( 40 - 100 )Amp, 415V, 50Hz, 36kA, Microprocessor based release for O/L, S/C, E/F & Neutral protection Model:- LK (Formerly L&T) DN2-250D 40-100 A, MTX2.0, CAT No. -CM92153OOOOAG ( Make - LK (Formerly L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S/ Havells )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding , cable socketing and connection with all suitable arrangement

Supply of LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Microprocessor Release of breaking capacity 36 kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features : 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal emory, suitable for Release Range 63-160A, 4 Pole - 1 no. b) Power Contactor, 4 pole, 415V, 100A similar to LK (Formerly L&T) model MCX22 or equivalent - 2 nos. c) Astro Time Switch, 2 module 29 similar to LK (Formerly L&T) Cat. AUTS02AST00 or equivalent - 2 nos. d) Tinned Copper Busbar ( 4 Bar ) each of capacity 200 Amps., 415V, 50 Hz. - 1 set e) Static Multifunction panel mounting Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply similar to LK (Formerly L&T) model : MFM 4410 LED meter Cl 1 with RS485 or equivalent - 1 no. f) CT of suitable ratio for MFM - 3 nos. g) LED indication lamp for Phases and "ON & OFF" indication - 12 nos. h) Petty Store for cable gland, socket, fuse etc. - 1 job i) complete with all other accessories, internal wiring and fabrication work for above panel ( Make - LK (Formerly L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (Formerly L&T) / ABB / Legrand / Genus / Conzerv / Elmeasure / Stelmec / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding , cable socketing and connection with all suitable arrangement

Supply of Decorative type 4M cast Iron pole with decorative type arm and light fitting 31 similar to DWARKA INDIA Pole Model no DLP-2-40-801,DBR-018-S & DGL-102-S or equivalent with single arm bracket, base plate including installation, testing and commissioning of pole. ( Make - Dwarka India / K-Lite / Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 32 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 33 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Trenching and laying of cable under ground by soil cutting through suitable dia HDPE pipe including supply of pipe without bricks alongwith refiling of trench by exavated soil and make good of surface as its original condition ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable including supply of GI clamps and GI nuts & bolts. ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe, GI clamps and GI nuts & bolts ( Cable will be supplied by Railway )

Supply of Maintenance Free Copper Bonded Solid Earthing Rods with 25 kg Earth Enhance Compound with below specifications : a) Certified by CPRI and NABL Accredaited Lab b) 38 ROHS certified c) Low Carbon High Tensile Rod d) Length of Electrode 3000 mm (3 Meter) e) Rod dia 17.2 mm f) Molecular Copper Plaring thickness 254 microns as per UL 467 g) Connection terminal size 32 mm x 6 mm with 10 mm hole along with nut bolt and washer including installation, testing and commissioning ( Make :ABB / VTR / Raychem /Veraizen Earthing / Ennob / True Power Ltd. / OBO Bettermann )

Supply of Heavy Duty Fiber Reinforced Polymers Pit Cover with below specifications : 39 a) Weight Carrying Capacity 5 Ton b) Lockable arrangement c) Top Dia 162 mm d) Bottom Dia 242 mm e) Height 230 mm f) As per IEC 62561-5 g) M5 Nut Bolts HDG 4.6, 30 mm length with 2 nos. of plain washer h) Tested by NABL Accrediated LAB including installation, testing and commissioning ( Make :ABB / VTR / Raychem /Veraizen Earthing / Ennob / True Power Ltd. / OBO Bettermann ) 40

Goods & Services Tax ( at present @ 18% )