Eastern Railway Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Eastern Railway - ER Tender
Civil And Construction
Construction Material
Ireps
Opening Date22 Nov 2024
Closing Date16 Dec 2024
Tender Amount₹ 6,21,70,253.65
Costs
EMD
₹ 4,60,900Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Completion Of Gf Of Stn. Bldg. Dome, Front Facade, Connecting Pilgrim Shed With Sb, Porch, Booking Office, Toilet, Waiting Hall At Tak Under Abss.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
270_2024-25-HOWRAH DIVISION-ENGG/EASTERN RLYTender No
270_2024-25Tender Authority
Eastern Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and 2 other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge // Powder coated minimum thickness 50 micron aluminium
72
89
5999.62
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, 3 straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. // Pre-laminated particle board with decorative lamination on both sides
140
951
123826.71
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, 4 straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
35
1325
43146.65
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap 5 beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. // With stainless steel cover plate minimum 1.25 mm thickness 21.7.2 35.00 Kg 635.60 22246.00 (-) 7.00 20688.78
68
2448
154865.27
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. // Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)
-
-
6
CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base 7 cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. // Granite work
55
418
21424.18
CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of 8 approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
282
1063
278900.4
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 9 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
115
6833
730832.13
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, 10 columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: // 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
75
9793
683114.06
DISMANTLING AND DEMOLISHING // Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
50
2928
136156.65
DISMANTLING AND DEMOLISHING // Disposal of building rubbish / malba / similar 13 unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
1380
219
281513.79
DRAINAGE // Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality // Making connection of drain or sewer line with existing 14 manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : // For pipes 100 to 250 mm diameter
35
683
22254.44
EARTH WORK // Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 2.25A 2070.00 cum 368.65 763105.50 (-) 7.00 709688.11 16
106
253
25034.39
EARTH WORK // Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
-
-
16
REINFORCED CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more.
45813.59
89
3819685.16
REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing 18 strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works upto plinth level // Concrete of M25 grade with minimum cement content of 330 kg /cum
230
8683
1857464.82
REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing 19 strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works above plinth level upto floor V level // Concrete of M25 grade with minimum cement content of 330 kg /cum
345
10306
3306744.27
REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Add for using extra cement in the items of design mix over and above the specified cement content therein.
17
688
10884.39
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Foundations, footings, bases of columns, etc. for mass concrete
288
307
82481.33
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Lintels, beams, plinth beams, girders, bressumers and cantilevers
288
608
162940.46
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Columns, Pillars, Piers, Abutments, Posts and Struts
167
804
124908.07
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per 24 sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
946
671
590816.26
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // Ridges plain (500 - 600mm)
229
450
95964.28
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 26 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // North light curves
23
465
9951.7
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 27 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // Gutter (600 mm over all girth)
135
1110
139435.83
STEEL WORK // Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
6933
93
599957.55
STEEL WORK // Steel work in built up tubular (round, square or rectangular hollow 29 tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished welded type tubes
5980
154
861460.86
STEEL WORK // Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
1164
88
95803.02
STEEL WORK // Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 32
17762
111
1849263.99
STEEL WORK // Providing and fixing bolts including nuts and washers complete.
774
140
100882.77
STEEL WORK // Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making 33 curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1150
612
654801.38
STEEL WORK // Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : // 4.0 mm thick glass panes (weight not less than 10 kg/sqm)
68
940
59464.57
FINISHING // Painting with aluminium paint of approved brand and manufacture to give an even shade . // Two or more coats on new work
1895
121
214037.41
FINISHING // EXTERIOR FINISHING // Finishing walls with textured exterior paint of required shade : // New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
2300
245
524055
CLADDING WORK // STONE WORK DRY CLADDING // Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin 37 coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
490
4474
2038892.94
EARTH WORK // Earth work in excavation by mechanical means (Hydraulic excavator) 38 / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. // All kinds of soil.
842
286
224620.76
EARTH WORK // Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. // All kinds of soil
222
28
5811.85
EARTH WORK // Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
518
2161
1041136.49
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying 41 cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. // 1:1.5:3 (1 Cement: 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
122
7783
883132.93
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 42 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources)
167
6670
1035956.53
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platform
244
766
173945.53
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Centering and shuttering including strutting, propping etc. and removal of form work for : // Foundations, footings, bases for columns
204
307
58424.27
CONCRETE WORK // DAMP-PROOF COURSE // Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
17
370
5863.14
MASONRY WORK // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:6 (1 cement : 6 coarse sand)
345
8288
2659317.1
FLOORING // TILE FLOORING // Chequered terrazo tiles 22 mm thick with gradedmarble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : // Light shade pigment using white cement
106
1295
127680.82
FLOORING // CERAMIC GLAZED TILES // Providing and laying Ceramic glazed floor tiles 47 of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
55
1107
56625.61
FINISHING // CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT // 12 mm cement plaster finished with a floating coat of neat cement of mix : // 1:3 (1 cement: 3 fine sand)
209
374
72723.54
ROOFING // SHEET ROOFING // Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with 49 bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. // 0.80 mm thick with zinc coating not less than 275 gm/sqm
544
1135
574446.86
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered 50 flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : // 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
53
1145
56483.88
FINISHING // CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT // 12 mm cement plaster finished with a floating coat of neat cement of mix : // 1:4 (1 cement: 4 fine sand)
1326
361
445547.93
FINISHING // 6MM CEMENT PLASTER // 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
115
334
35742.69
FINISHING // Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1397
123
160907.16
FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint system 54 for interiors and exteriors using Primer as per manufacturers specifications : // Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
4387
158
648501.69
FINISHING // EXTERIOR FINISHING // Applying priming coat: // With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
1211
55
62505.76
FINISHING // EXTERIOR FINISHING // Applying priming coat: // With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
309
29
8549.26
WATER SUPPLY // PTMT FITTINGS // Providing and fixing PTMT bib cock of approved quality and colour. // 15mm nominal bore, 86 mm long, weighing not less than 88 gms
22
109
2247.53
WATER SUPPLY // Providing and fixing uplasticised PVC connection pipe with brass unions : // 30 cm length // 15 mm nominal bore
22
74
1530.41
WATER SUPPLY // BRASS FITTINGS // Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : // 25 mm nominal bore
22
399
8166.61
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
22
136
2794.84
STEEL WORK // Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
22
185
3804.54
ROAD WORK // MISCELLANEOUS // Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished 62 with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
22
8277
169358.67
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with 63 polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. // 2 mm thick corrugated (2.5" or 4.2" or 6") or step- down (2" or 3" or 6" ) as specified
74
1179
81155.99
WATER SUPPLY // PP-R PIPES // Providing and fixing 3 layer PP-R (Poly propylene 64 Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. -External work // PN - 10 Pipe, 90 mm OD (SDR-11)
294
1223
334638.74
WATER SUPPLY // PP-R PIPES // Providing and fixing 3 layer PP-R (Poly propylene 65 Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. -External work // PN - 10 Pipe, 110 mm OD (SDR-11)
173
1689
271823.66
STEEL WORK // Steel work welded in built up sections/ framed work, including 66 cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. // In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
405
102
38512.46
ROAD WORK // ROADS // Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. // With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 11.4 716.00 Sqm 855.90 612824.40 (-) 7.00 569926.69 68
386
179
64436.91
FLOORING // 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
68
FINISHING // CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT // Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. // 12 mm cement plaster
2214
386
795914.18
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 70 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
52
7365
356178.65
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 71 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
76
7783
550148.38
REINFORCED CEMENT CONCRETE // CAST IN SITU // Providing and laying in position 72 specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : // 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
148
8364
1151248.49
REINFORCED CEMENT CONCRETE // CAST IN SITU // Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, 73 fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : // 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
97
10185
918793.36
FINISHING // CEMENT PLASTER (IN FINE SAND) // 12 mm cement plaster of mix : // 1:6 (1 cement: 6 fine sand)
2760
282
723837.6
FINISHING // CEMENT PLASTER (IN FINE SAND) // 12 mm cement plaster of mix : // 1:4 (1 cement: 4 fine sand)
421
294
115442.62
FINISHING // 6MM CEMENT PLASTER // 6 mm cement plaster of mix : // 1:3 (1 cement : 3 fine sand)
317
253
74601.67
FINISHING // Extra for plastering: // Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
421
214
83904.88
FINISHING // Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : // New work (two or more coats) over and including water thinnable priming coat with cement primer
475
162
71806.46
FINISHING // EXTERIOR FINISHING // Finishing walls with Acrylic Smooth exterior paint of required shade : // New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
475
166
73705.99
FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint system 80 for interiors and exteriors using Primer as per manufacturers specifications : // Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
212
144
28568.48
FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint system 80 for interiors and exteriors using Primer as per manufacturers specifications : // Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
265
140
34515.32
FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% 81 and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mm
288
1416
379435.54
FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% 82 and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 800x800 mm
288
1879
503525.81
FLOORING // STONE FLOORING // Marble stone flooring with 18 mm thick marble 83 stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : // Makrana white second quality
245
3377
769551.98
NEW TECHNOLOGIES AND MATERIALS // Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably 84 fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.
138
3375
433211.67
NEW TECHNOLOGIES AND MATERIALS // Providing and laying 60mm thick factory 85 made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
52
757
36608.52
FINISHING // Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : // Two or more coats on new work
106
131
12958.34
DISMANTLING AND DEMOLISHING // Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. // In cement mortar
26
1698
41068.52
DISMANTLING AND DEMOLISHING // Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in- charge.
22
701
14361.9
MASONRY WORK // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: // Cement mortar 1:4 (1 cement : 4 coarse sand)
52
6882
332813.52
MASONRY WORK // Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means.
64
142
8451.84
MASONRY WORK // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: // Cement mortar 1:6 (1 cement : 6 coarse sand)
59
6658
365338.18
FLOORING // Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks.
46
733
31370.57
WOOD AND P.V.C. WORK // FRAMES AND TRUSSES // Providing wood work in frames 93 of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). // Sal wood
1
-
99250.39
WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing to 94 existing door frames. // 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter indifferent plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
141
3963
519759.98
WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing 95 M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. // Fixed to openings /wooden frames with rawl plugs screws etc.
2107
197
387395.13
WOOD AND P.V.C. WORK // COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS: 1378) // Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) // 250x16 mm
38
165
5862.91
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : // 150x10 mm
17
232
3672.66
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing bright finished brass handles with screws etc. complete: // 125 mm
17
205
3242.63
WOOD AND P.V.C. WORK // CHROMIUM PLATED BRASS FITTINGS // Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
17
817
12924.67
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing aluminium 100 extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
17
856
13538.1
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides 101 with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // For fixed portion // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
265
433
106946.98
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, 102 straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
317
531
156779.96
WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 103 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. // 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) (Board with BIS certification marks)
17
1797
28420.85
WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single 104 rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
17
702
11108.11
WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing to existing door frames. // 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of 105 required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
17
3496
55283.62
WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 106 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. // Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 9.147D.2 17.00 Sqm 10030.30 170515.10 (-) 7.00 158579.04 107
17
7634
120695.12
ROOFING // Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of 108 masonry (lead caulking will be paid for separately): // Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 110 mm diameter
59
319
17544.68
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ 109 accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Single tee with door // 110x110x110 mm
10
205
1910.68
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ 110 accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Single tee without door // 110x110x110 mm
10
190
1773.97
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ 111 accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Bend 87.5 degrees // 110 mm bend
33
132
4051.08
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ 112 accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Shoe (Plain) // 110 mm Shoe
10
115
1078.34
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 113 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. // 110 mm
22
309
6332.37
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ 114 accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
10
47
445.47
WATER SUPPLY // C.P.V.C. PIPES // Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : // 50 to 80 mm nominal bore
10
1513
14077.41
WATER SUPPLY // BRASS FITTINGS // Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : // 25 mm nominal bore 18.17.4 10.00 Each 878.25 8782.50 (-) 7.00 8167.73
10
532
4950.85
WATER SUPPLY // BRASS FITTINGS // Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : // 80 mm nominal bore
10
2227
20716.68
WATER SUPPLY // C.P. BRASS FITTINGS // Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. // 15 mm nominal bore
10
708
6588.12
WATER SUPPLY // C.P. BRASS FITTINGS // Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. // 15 mm nominal bore
10
594
5531.18
WATER SUPPLY // PTMT FITTINGS // Providing and fixing PTMT pillar cock of approved quality and colour. // 15 mm nominal bore, 107 mm long, weighing not less than 110 gms
10
180
1681.44
WATER SUPPLY // PTMT FITTINGS // Providing and fixing PTMT, push cock of approved quality and colour. // 15 mm nominal bore, 98 mm long, weighing not less than 75 gms
10
96
896.99
WATER SUPPLY // Providing and fixing PTMT grating of approved quality and colour. // Rectangular type with openable circular lid // 150 mm nominal size square 100 mm diameter of the inner hinged round grating
10
169
1578.21
SANITARY INSTALLATIONS // Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, 124 including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: // White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
10
5781
53766.56
SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal type 125 water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid
10
5540
51527.11
SANITARY INSTALLATIONS // Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes 126 respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : // One urinal basin with 5 litre white P.V.C. automatic flushing cistern
10
5268
49000.31
SANITARY INSTALLATIONS // Providing and fixing wash basin with C.I. brackets, 15 127 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
25
1679
39050.7
SANITARY INSTALLATIONS // Providing and fixing wash basin with C.I. brackets, 15 128 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
10
1913
17797.88
SANITARY INSTALLATIONS // Providing and fixing wash basin with C.I. brackets, 15 129 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap
17
3619
57225.88
SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
17
1500
23715.79
SANITARY INSTALLATIONS // Providing and fixing white vitreous china water closet squatting pan (Indian type) : // Orissa pattern W.C. pan of size 580x440 mm
10
2758
25651.26
SANITARY INSTALLATIONS // Providing and fixing Stainless Steel A ISI 304 (18/8) 132 kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : // Kitchen sink without drain board // 610x510 mm bowl depth 200 mm
10
4274
39751.92
SANITARY INSTALLATIONS // Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required : // White glazed fire clay draining board of size 600x450x 25 mm
10
1351
12570.34
SANITARY INSTALLATIONS // Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 135
10
1411
13123.69
SANITARY INSTALLATIONS // Providing and fixing soil, waste and vent pipes : // 100 mm dia // Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
64
1077
64126.85
SANITARY INSTALLATIONS // Providing and fixing plain bend of required degree. // 100 mm dia // Sand cast iron S&S as per IS : 3989
17
439
6952.45
SANITARY INSTALLATIONS // Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. // 100 mm dia // Sand cast iron S&S as per IS - 3989
17
597
9448.06
SANITARY INSTALLATIONS // Providing and fixing soil, waste and vent pipes : // 75 mm diameter : // Sand cast iron S&S pipe as per IS: 1729
12
931
10396.1
SANITARY INSTALLATIONS // Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. // 100x100x100 mm // Sand cast iron S&S as per IS - 3989
17
731
11563.43
SANITARY INSTALLATIONS // Providing and fixing 100 mm sand cast Iron grating for gully trap.
17
45
715.4
WATER SUPPLY // Providing and fixing uplasticised PVC connection pipe with brass unions : // 45 cm length // 15 mm nominal bore
17
85
1347.01
WATER SUPPLY // C.I./DUCTILE IRON PIPES & SPECIALS // Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : // 200 mm dia pipe
52
3083
149125.31
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : // 200 mm diameter // Class I
10
11609
107968.35
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and fixing 145 enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : // 200 mm dia nominal bore
10
8080
75145.4
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 15 mm dia nominal bore
22
304
6222.91
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 20 mm dia nominal bore
33
373
11458.11
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I.fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 25 mm dia nominal bore
64
491
29236.22
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 50 mm dia nominal bore
52
893
43195.15
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : // 15 mm dia nominal bore
12
485
5414.83
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : // 20 mm dia nominal bore
22
541
11070.91
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.-External work // 80 mm dia nominal bore
191
919
163259.73
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.-External work // 50 mm dia nominal bore
22
654
13384.93
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.-External work // 40 mm dia nominal bore
91
558
47253.16
WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.-External work // 25 mm dia nominal bore
52
417
20212.06
WATER SUPPLY // Providing and fixing gun metal non- return valve of approved quality (screwed end) : // 50 mm nominal bore // Horizontal
10
1173
10914.94
WATER SUPPLY // Providing and fixing gun metal non- return valve of approved quality (screwed end) : // 50 mm nominal bore // Vertical
10
1320
12283.44
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : // 200 mm dia Ductile Iron Class K-9 pipes
52
2228
107753.33
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : // 150 mm dia Ductile Iron Class K-9 pipes
52
1625
78587.42
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : // 100 mm dia Ductile Iron Class K-9 pipes
52
1081
52294.09
WATER SUPPLY // C.I./DUCTILE IRON PIPES & SPECIALS // Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : // Up to 300 mm dia
10
8191
76183.27
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : // 100 mm diameter // Class I
10
4097
38110.47
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : // 150 mm diameter // Class I
10
5980
55618.18
SANITARY INSTALLATIONS // Providing and fixing plain bend of required degree. // 100 mm dia // Sand cast iron S&S as per IS - 1729
10
412
3840.43
REINFORCED CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more.
46256
89
3856570.87
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and 166 placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3450
9
31122.45
FLOORING // KOTA STONE FLOORING // Kota stone slab flooring over 20 mm 167 (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : // 25 mm thick
52
1706
82531.18
ROAD WORK // MISCELLANEOUS // Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and 168 conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
160
1719
255787.2
ROAD WORK // ROADS // Preparation and consolidation of sub grade with power road 169 roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
317
180
53213.21
ROAD WORK // ROADS // Supplying and stacking at site. // 90 mm to 45 mm size stone aggregate
25
1937
45049.2
ROAD WORK // ROADS // Supplying and stacking at site. // 63 mm to 45 mm size stone aggregate
25
1624
37769.63
ROAD WORK // ROADS // Supplying and stacking at site. // 53 mm to 22.4 mm size stone aggregate 173
25
1837
42716.06
ROAD WORK // ROADS // Laying, spreading and compacting stone aggregate of 174 specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
25
865
20129.85
ROAD WORK // ROADS // Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling. // With road roller/ hand roller
58
21
1175.89
ROAD WORK // SURFACE DRESSING // Surface dressing one coat on new surface with 176 bitumen of specified grade at a rate of 1.95 kg/sqm of surface area with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity , etc. complete : // Using bitumen emulsion (minimum 50% bitumen content- RS grade conforming to IS : 8887)
58
169
9159.01
ROAD WORK // Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. // With medium setting bitumen emulsion // On W.B.M / W.M.M. @ 0.4kg/sqm
58
16
881.92
ROAD WORK // SEAL COAT // Providing and laying seal coat over prepared surface of 178 road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete.
58
106
5723.03
ROAD WORK // CONCRETE PAVEMENTS // Providing and laying design mix cement 179 concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, usingcoarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). // Cement concrete prepared with batch mixing machine
16
9492
141254.35
ROAD WORK // PAINTING AREA/RUNWAY MARKING // Painting road surface marking 180 with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. // New work (Two or more coats)
58
239
12942.9
ROAD WORK // MISCELLANEOUS // Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in 181 accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
14
175
2285.01
ROAD WORK // MISCELLANEOUS // Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with 182 electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. // 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
15
10013
139685.54
ROAD WORK // MISCELLANEOUS // Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and 183 curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
15
8613
120159.02
STONE WORK // Stone tile work for wall lining upto 10 m height with special adhesive 184 over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. // 8mm thick (mirror polished and machine cut edge) // Granite stone of any colour and shade
242
2675
602193.04
STONE WORK // Stone tile work for wall lining upto 10 m height with special adhesive 185 over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. // 8mm thick (mirror polished and machine cut edge) // Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble
219
2346
477921.84
FLOORING // STONE FLOORING // Marble stone flooring with 18 mm thick marble 186 stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : // Agaria White 8.2.2.2 173.00 Sqm 4425.35 765585.55 (-) 7.00 711994.56
236
2608
572436.76
CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias 188 and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Granite stone slab of all colour and texture except black, Cherry/Ruby red // Area of slab over 0.50 sqm
173
3301
531170.29
ROAD WORK // MISCELLANEOUS // Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in 189 required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. // 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
33
1011
31033.73
FLOORING // VITRIFIED FLOOR TILES // Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all 190 complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. // Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
115
3908
418046.16
FLOORING // VITRIFIED FLOOR TILES // Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all 191 complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. // Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
115
2677
286401.41
CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base 192 cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
58
808
43591.61
CLADDING WORK // Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in 193 white cement complete. // Providing and fixing 75mm high, 50mm deep and 18mm thick stone slab table rubbed, edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. // Granite Stone of approved shade
58
3542
191101.33
CARRIAGE OF MATERIALS // By Mechanical Transport including loading,unloading and stacking // Earth // 2km
15
203
2845.52
MASONRY WORK // HALF BRICK MASONRY // Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. // Cement mortar 1:4 (1 cement :4 coarse sand)
15
1018
14201.8
FINISHING // POINTING ON BRICK WORK // Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): // Flush / Ruled/ Struck or weathered pointing
15
214
2990.88
FINISHING // CEMENT PLASTER (IN FINE SAND) // 15 mm cement plaster on the rough side of single or half brick wall of mix : // 1:6 (1 cement: 6 fine sand)
15
324
4523.98
STEEL WORK // Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box 198 for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
15
185
2583.54
FLOORING // VITRIFIED FLOOR TILES // Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building 199 all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : // Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
15
2589
36129.11
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, 200 straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
15
1019
14226.21
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, 201 straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
15
4540
63342.76
WOOD AND P.V.C. WORK // Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : // Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (+/- 0.2 mm), made out of single 202 piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. 9.144 15.00 Sqm 3654.45 54816.75 (-) 7.00 50979.58
15
462
6448.39
STEEL WORK // Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with 204 frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer
15
5374
74972.18
STEEL WORK // Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the 205 end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. // 80x1.20 mm M.S. laths with 1.20 mm thick top cover
15
2868
40012.79
STEEL WORK // Extra for providing mechanical device chain and crank operation for operating rolling shutters. // Exceeding 10.00 sqm and upto 16.80 sqm in the area
15
1108
15466.36
WOOD AND P.V.C. WORK // Providing and fixing 25 mm thick shutters for cup board 207 etc. : // Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. // 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
15
2818
39318.07
WOOD AND P.V.C. WORK // STAINLESS STEEL FITTINGS // Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : // 125x64x2.50 mm
15
104
1453.59
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
15
723
10097.01
WOOD AND P.V.C. WORK // Providing and fixing panelled or panelled and glazed 210 shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) // Float glass panes // 4 mm thick glass pane (weight not less than 10kg/sqm).
15
1897
26464.54
WATER PROOFING // Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is 211 still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
15
585
8168.42
FINISHING // Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. // Two or more coats on new work
15
92
1293.86
FINISHING // EXTERIOR FINISHING // Finishing walls with water proofing cement paint of required shade : // New work (Two or more coats applied @ 3.84 kg/10 sqm)
15
97
1361.52
SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal type 214 water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern& C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid
15
6941
96831.13
SANITARY INSTALLATIONS // Providing and fixing wash basin with C.I. brackets, 15 215 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap
15
2950
41161.57
SANITARY INSTALLATIONS // Providing and fixing soil, waste and vent pipes : // 100 mm dia // Sand cast iron S&S pipe as per IS: 1729
15
1018
14201.8
SANITARY INSTALLATIONS // Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. // 100 mm dia // Sand cast iron S&S as per IS - 1729
15
530
7403.27
SANITARY INSTALLATIONS // Providing and fixing PTMT towel rail complete with 218 brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. // 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
15
573
8001.72
WATER SUPPLY // BRASS FITTINGS // Providing and fixing brass bib cock of approved quality : // 15 mm nominal bore
15
303
4238.71
WATER SUPPLY // BRASS FITTINGS // Providing and fixing brass stop cock of approved quality : // 15 mm nominal bore
15
303
4238.71
WATER SUPPLY // C.P. BRASS FITTINGS // Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : // 15 mm nominal bore
15
434
6057.09
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete -15 mm nominal bore 19.2.2 15.00 Metre 1095.15 16427.25 (-) 7.00 15277.34 223
-
-
406420
HORTICUTURE AND LANDSCAPING // Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
6
515
3093.6
HORTICUTURE AND LANDSCAPING // Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : // Screened through sieve of I.S. designation 20 mm
6
254
1524.9
HORTICUTURE AND LANDSCAPING // Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : // Screened through sieve of I.S. designation 4.75 mm
6
319
1919.4
HORTICUTURE AND LANDSCAPING // Grassing with selection No. 1 / Doob grass 4 including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). // In rows 5 cm apart in both directions
6
17
106.2
HORTICUTURE AND LANDSCAPING // Digging holes in ordinary soil and refilling thesame with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) // Holes 1.2 m dia and 1.2 m deep
12
335
4026
HORTICUTURE AND LANDSCAPING // Edging with bricks laid dry length wise, 6 including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : // Common burnt clay F.P.S (non modular) bricks of Class designation 7.5
12
396
4762.8
HORTICUTURE AND LANDSCAPING // Providing & laying Selection no. 1 doob grass 7 turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and then rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge
12
87
1050
HORTICUTURE AND LANDSCAPING // Complete maintenance of the entire garden features having as per yardstick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, 8 mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. // Open spaces(1Mali for 3.00Acre).
12
1
19.2
HORTICUTURE AND LANDSCAPING // Providing and wartering of irrigation water 9 through water tanker of Horticulture features i.e. lawn, tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit. capacity with one labour for watering i/c cost of water, filling of tanker, wartering at site with all leads and lifts as per direction of officer-in-charge.
12
932
11195.4
HORTICUTURE AND LANDSCAPING // Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cost of plant & water) // Shrubs Plant
12
3
43.8
HORTICUTURE AND LANDSCAPING // Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cost of plant & water) // Hedge Plant /Ground cover
12
2
29.4
HORTICUTURE AND LANDSCAPING // Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor.
12
91
1097.4
FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Araucaria cookie having ht. 75 cm to 90 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
12
215
2583
FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
12
157
1894.2
FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
12
344
4132.8
FOLIAGE AND SHADE LOVING PLANTS // Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.
12
322
3874.8
ORNAMENTAL PLANTS // Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full 17 bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
12
322
3874.8
ORNAMENTAL PLANTS // Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm Circumference of base stem well developed in 40 cm challi, as per direction of the officer-in-charge.
12
1537
18450
ORNAMENTAL PLANTS // Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge.
12
1614
19372.8
ORNAMENTAL PLANTS // Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge.
12
861
10332
ORNAMENTAL PLANTS // Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in- charge.
12
1183
14206.8
ORNAMENTAL PLANTS // Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge.
12
1127
13530
GROUND COVERS PLANTS // Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
12
20
240
TREE PLANTS // Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in- charge.
12
105
1260
TREE PLANTS // Providing and stacking of Plumeria alba of height 165-180 cm. with 3- 4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
12
225
2700
TREE PLANTS // Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
12
400
4800
TREE PLANTS // Providing and stacking of Polyalthia longifolia (Ashok) of height 150- 165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
12
80
960
TREE PLANTS // Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
12
70
840
SHRUBS // Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge.
12
35
420
SHRUBS // Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
12
250
3000
SHRUBS // Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge.
12
50
600
SHRUBS // Providing and stacking of Hibiscus rosasinensis of height 60-75 cm. with 5- 6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.
12
45
540
SHRUBS // Providing and stacking of Hibiscus variegated of height 60-75 cm. with 8- 10 branches and healthy variegated foliage in cement pots of size 35 cm as per direction of the officer-in-charge.
12
180
2160
SHRUBS // Providing and stacking of Tecoma gaudichaudi of height 60-75 cm. with 5- 6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.
-
-
35
Provision of barricading with contractor's bamboos / ballies vertical post of 100mm dia. planted at every 2m interval, projecting at least 1.5m above ground level and driven firmly (minimum 0.5m) inside ground and including painting verticals & horizontals with red luminous paints / strips at 1 alternative bay on barricade. Barricades shall be maintained through out the execution of the work and shall be removed in workman like manner on completion of the work only after instruction of Engineer in-Charge. Note: (1) 60% payment shall be made on provision of barricading at work-site and balance 40% payment after removal of barricades. (2) The released bamboos / ballies shall be the property of the Contractor. With 3 horizontal bamboo / balli members of minimum 50mm dia. spaced equally
150
135
20304
Supplying, driving and erecting in all types of soils, hard wood pile 5m to 7m long without joint, 125mm average dia. for protection of bank slope including two coats of coal tar paint complete, as directed. Note: Payment will be made as per actual driven length of pile.
150
199
29955
Dewatering of natural or accumulated water from any location. Payment to be done for Horse power of pump multiplied by pumping hours.
150
44
6745.5
Hiring of machinery for minor miscellaneous works for short duration including 4 operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity
150
808
121296
"Providing and fixing full height wooden partitions wall with partly glass and partly with plywood on both faces and made up of Frame work of size 50X50X1.60mm thick aluminum section weight Not less than 0.836kg/rmt , the spacing of the alluminium frame members would be maximum of 450mm c/c bothways (Horizontal/Vertical) or as directed Architect and Engineer in Charge. The frame to be fixed on floor and ceilling roof with 65 to 75mm long screw. The lower and upper panel should be provided with 9.00 mm thick exterior grade Post -lamination ply (IS 710 Grade)/HDF Board to be fixed over the frame work on bothside. Architect and Engineer in Charge approved make on 1 both sides finished. The middle panel shall be provided 10 mm thick toughened glass . (The finishing of the partion wall would be done by using laminates/Veeners duly polished and the payment would be made seperately through seperate items). Rate inclusive of material, transportation, loading/unloading labor,tools Fitting and fixing etc.for all heights complete in all respects. The site Work approved by Architect and Engineer in Charge at site. The work shall be measured base on area of front elevation . Rates include all materials, labor, transportation, delivery, completion of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Ply- Green Panel, Century, Ambay, Hardware, Locks, Telescopic Drawer Slides: Hettich, Haffele,Ebco,Godrej, Screws, Nuts & Bolts Omni, Ebco, Hettich, Hepco and toughened Glass - Saint gobain, Modi or Equivalent Make). "
42
7349
308659.68
"Providing and fixing double skin full wooden partitions wall made up of Frame work to be 50X50X1.60mm thick aluminum section weight not less than 0.836kg/rmt with maximum distance of 450mm c/c bothways (Horizontal/Vertical) or as directed Architect and Engineer in Charge. The frame work to be fixed on floor and ceilling by 65 mm to 75 mm screws. The full panel should be provided with 9.00 mm thick exterior grade Post -lamination ply (IS 710 Grade)/HDF to be fixed over the frame work on bothside. (The finishing of the partion wall would be done by using laminates/Veeners duly polshed and the payment would be made seperately through seperate items).Architect and Engineer in Charge approved make on both sides finished. Rate inclusive of material, transportation, loading/unloading labor,tools Fitting and fixing etc.for all heights complete in all respects. The site Work approved by Architect and Engineer in Charge at site. The work shall be measured base on area of front elevation . Rates include all materials, labor, transportation, delivery, completion of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Ply- Green Panel, Century, Ambay, Hardware: Hettich, Haffele,Ebco,Godrej, Screws, Nuts & Bolts Omni, Ebco, Hettich, Hepco or Equivalent Make). (The materials/ products to be used in the instant item should have GreenPro Certification and qualifies as green product those are available in the directory of GreenPro certified product, materials and tecnologies issued by CII and to be approved by Engineer in charge) "
-
-
2
"Providing and fixing of frameless glass partition wall with or Without door glazing consisting of 12 mm clear toughened glass ( Saint gobain/ Modi or Equivalent make) and fixing with Dorma/Ozone/ Archies make with all necessary fittings upto all height including scaffolding all complete as per the direction of Atrchtect and Engineer-in-charge also The work shall be measured 3 base on area of front elevation . The work shall be measured base on area of front elevation. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (The materials/ products to be used in the instant item should have GreenPro Certification and qualifies as green product those are available in the directory of GreenPro certified product, materials and tecnologies issued by CII and to be approved by Engineer in charge)"
42
9239
388054.8
"Supply , fitting and fixing 4 mm Thk. veneer of approved brand and colour . The work shall be measured base on area . The rate to include all materials, labour, transport, delivered and 4 placed in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Make Veneer - Green, century , Natural or Equivalent Make). "
42
2467
103629.96
"Supply , fitting and fixing 3 mm veneer of approved brand and colour . The work shall be measured base on area . The rate to include all materials, labour, transport, delivered and placed 5 in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Veneer - Green, century , Natural or Equivalent Make). "
42
1879
78949.08
"Supply , fitting and fixing 1.00 mm Thk. Laminate of approved brand and colour. The work shall be measured base on area . The rate to include all materials, labour, transport, delivered 6 and placed in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Laminate - Green, century , Royal Touch or Equivalent Make). "
42
1889
79345.56
"Supply , fitting and fixing 0.8 mm Thk. Laminate of approved brand and colour. The work shall be measured base on area . The rate to include all materials, labour, transport, delivered 7 and placed in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Laminate - Green, century , Royal Touch or Equivalent Make). "
42
1028
43216.32
"Providing and applying French Chalk polish on veneer surface and wooden surface. 8 The work shall be measured base on applied area . The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. "
42
940
39499.32
"Providing and applying French Chalk polish on wooden Bit. The work shall be 9 measured base on area . The work shall be measured base on Running Metre. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge."
44
155
6853.44
"Providing and applying Melamine Polish on veneer surface and wooden surface. Thework shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. "
42
1228
51591.96
"Providing and applying Poly urethane (mechanically spray PU polishing) on veneer 11 surface and wooden surface. The work shall be measured base on area . The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge."
42
4409
185205.72
"Providing and fixing of Extrior Grade 4.00 mm Thickness sheet . ACP cladding ( ACP cladding Make: Aludecor, Pratap, Reynobond, Viva, Alstone and Aluminium Section : Hindalco or Equivalent) as shown in drawing. ACP shall be FR-B1 grade. ACP panels shall mechanically fixed on Aluminium structure with necessary fixing arrangement shown in Tender drawings. Joint of ACP to be 12 filled with non staining silicon sealant Rate shall include of aluminium frame work, Alum./MS brackets, SS screws, SS nut bolts etc. complete with necessary fitting and fixtures. MS brackets shall be finished with two coats of synthetic enamel paint of approved shade over one coat of zinc chromate primer.The work shall be measured base on area of finish . The work shall be measured base on area of surface area . Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. "
85
6246
530988.2
"Providing and fixing of wallpaper / Graphic for highlighting the walls with proper adhesive in line level for where ever required as per the drawings. Make - (international Grade Paper) 13 at wall, partition, falseceilling etc. as advised by Architect and Enginner in Chgarge. (Wallpaper - Asian Paints, D'decor, LG or Equivalent Make). The work shall be measured base on area of surface area . Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. "
85
1379
117250.7
"Providing and fixing in the true horizontal level Grid false ceiling system of mineral Fibre Ceiling tiles (Make : Saintgobain, Gypsum India, Gyprock or Equivalent . The suspension system shall be the 'Trulock Silhouette' revealed profile grid system with 15mm wide flanges incorporating a 3mm or 6mm central recess color black or white revealed Silhouette main runners and cross tees to have mitered ends with birds mouth Notches to provide mitered cruciform junctions. Main runners to be spaced at 12mm c/c fixed by using 2mm pre straightened GI Wire.Main tee,rotary stitched of size 15mm x44mmx3600mm at every 1200mm c/c maximum and 1200mm cross tee of size 15mmx44mm x1200mm at every 600 mm c/c maximum and 600mm c/c cross tee of size 15mmx44mmx600mm at every 1200mm c/c. The tiles should have Humidity Resistance (RH ) of 90% - 99%, Colour White, in module size of 600 x 600 x 16mm, suitable for Green Building 14 application(Dune Supreme / Dune Of Armstrong Make - Radar Climaplus / Pin Perf Climaplus Of Usg Boral / Celotex Pin / Celotex Fine Fissured Of Gyproc). The work includes cost and conveyance of materials and labour charges includings. All Operational charges tools lifts and all heights etc. surfaces of the false ceiling should be with drop ceiling.Manufactures specifications to be strictly followed. No extra shall be payable for making cutouts and providing frame for cutouts of for making staggred ceiling. making complete as per the design. The rate shall be inclusive of all the necessary material,required hardware, labour, transportation, necessary for the complete execution of the item. The work shall be measured base on area of sarface area of ceiling. Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge.(The materials/ products to be used in the instant item should have GreenPro Certification and qualifies as green product those are available in the directory of GreenPro certified product, materials and tecnologies issued by CII and to be approved by Engineer in charge)"
211
1581
333633.2
"Wall Paneling on brick wall with 9 mm thick IS 710of approved make. All inside frame shall be made of aluminum member's size of 25mmx 25mmx 1.2mm thick section at maximum 2'-0"" c/c. including all necessary hardware fittings. All other finishes shall be done as per detail drawings 15 and as per direction of Architect and Engineer in Charge.. (The finishing of the panelling would be done by using laminates/Veeners duly polished and the payment would be made seperately through seperate items). The rate to include all materials, labour, transport, etc complete. The work shall be measured base on area of all elevation. Rates to include all materials, labour, transport, , deliveredcompletion finish of work in all respect and placed in position at site of work approved by Architect and Engineer in Charge. (Ply- Green Panel, Century , Ambay or Equivalent Make). "
42
3989
167562.36
"Providing and fixing in position Roller, horizontal, vertical blinds. With imported fittings heavy duty powder coated of approved colour including aluminium top channels, chord, locks, painted Tilt rod etc. completed. item design select by Atrchtect and Engineer-in-charge also work approved by Architect and Engineer in Charge. The work shall be measured base on area of elevation. The rate to include all materials, labour, transport, etc complete. The work shall be measured base on area of all elevation. Rates to include all materials, labour, transport, , delivered, completion finish of work in all respect and placed in position at site of work approved by Architect and Engineer in Charge."
-
-
16
"Supplying fitting and fixing heavy duty Curtain with Rod SS 303 with decorative head. Rates to include all materials, labour, transport, delivered, completion finish of work in all respect and placed in position at site of work approved by Architect and Engineer in Charge. "
3
1575
4725.9
Providing & Fixing 84R Plain Panel Aluminium Sun Louver System of approved make and single side colour as per Exterior colour chart. The system shall consist of Panel 84mm wide x l6mm deep x 0.5mm thick in standard length of I M to 4M.The panels shall be coil coated on a 18 continuous point line, double baked & roll formed from Corrosion Resistant Aluminium Alloy AA3O05 for higher strength & roll forming characteristics. The panel shall be clipped on to o baked & enamelled V5 stringer 33mm wide 48mm deep & manufactured from 0.95mm thick MS profile in Black color with cutouts to hold the ponels in module of l00mm clc. The first stringer sholl be fixed of 150mm from both ends & thereafter at 1000mm c/c depending on wind load. The stringer sholl be fixed to a suitable MS substructure with Nut/Bolt & Washer.
63
4120
259595.28
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%