Eastern Railway Tender

Supply of Yellow Retro reflective sheet for LC Boom prismatic grade reflective sheets of size 305 x 290 mm one set consist 18 pieces. Inspection: Consignee

Supply of Dual Tone Bell /Buzzer with Flasher arrangement and 20 Watt horn working on 24 V DC/ 110 V AC for warning road users at LC gates. Inspection: Consignee

Supply of PMDC MOTOR 24V DC, 90W/1500RPM.The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee.

"Supply of boom lock PMDC motor 24V DC/40W/1500RPM.The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee."

"Supply of TIMING BELT. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee."

"Supply of FRICTION CLUTCH SUB ASSEMBLY. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee."

Supply of PUSH BUTTON ELEMENTS. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee.

Supply of Limit Switch Set for boom lock proving. The material will be as per RDSO Specn. No.RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee.

Berger Golden Yellow Paint , RFU,FINISHING,AIR DRYING BRUSHING /SPRYING, Size 20 Litre in Mild Steel Drum Brand: Berger (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC511687794716127 dt.21/12/2022)

PAINT ALLUMINIUM FOR GENERAL PURPOSE [IN DUAL CONTAINER ]TO IS: 2339/1963 AMENDMENT NO. 3.(Shelf life of this item is 12 months) MAKE/BRAND: MAX

"Paint black japan type-B to IS:341/2016.With additional requirements of ICF/MD/SPEC- 052 lssue Status :02, Rev.01 "

Supply of Drill bit 9/32" (7.14MM). IS:5099/83 AND 5101/69 OR LATEST. Inspection: Consignee

Supply of hand operated track drilling machine for bonding hole. Inspection: Consignee

Cable OFC, 24 Fibre Armoured Underground to SPEC. No. IRS-TC-55/2006 (REV-1) with Amdt 1.1 or Latest.

"Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) Copper strip of 150x25x6 mm, to terminate earth rod - 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of l50x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as

Provision of cement concrete enclosure for earth electrodes as per DRG. NO. S&T/C- 36(NKG). This includes supply of all materials by the contractor duly inspected by consignee.

"Installation, erection and wiring of CLS unit (including post, base, ladder etc.), LED unit including paying out of tail cable from location box and Earthing of CLS [LED type]. This includes supply of CLS unit 2 aspect complete without lenses, lamps and signal transformer as per DRG.NO.SA 23001/A/ M/ADV.ALT-8 AND AS PER SPEC.NO.IRS/5-26/64. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note: - signal unit should be compatible to 'LED' type. Note: - installation, erection & wiring of signalling unit includes led signal lightening unit including current regulator. this also includes protection of unit from rain water." (A) "Supply. Inspection: (i)RDSO/RITES if value of item i n work more than 5 lakhs (ii) Consignee subject to

Casting, concreting and curing of concrete foundation ((in ratio 1:3:6), erection and installation of full size apparatus case (GKP type)/Stainless Steel (SS) Apparatus Case as per DRG.NO. S&T/C-6/98(NKG) with 'E' type lock on CC foundation. This includes cost of all materials required for fixing holding down bolts, casting, concreting. Note: - bolts, nuts and washers, bitumen compound to be supplied by contractor and bitumen compound to be used in between apparatus case and foundation as per site engineer. This also includes bottom of apparatus cases filled with sand and the outside covered with masonry work and neat cement plastering. Note: - Location boxes to painted

Dismantling of location box / RCC Goomty including all its accessories & concrete foundation.

Shifting/lifting of location box to facilitate earthwork of Engg/Con. This includes filling with sand and plastering inside location box.

Dismantling of existing main signal including dependent shunt signal, calling on signal

Dismantling of existing Signal Foundation (upto ground level by hydraulic breaker).

Supply of Thermo shrink Universal Jointing kit for Quad Cable (for straight joints) as per RDSO spec IRS/TC-77/ 2012 revision 3 With latest Amdt.

Repair of pucca roads to original state in level crossing area after cable laying.

Supply of Dual Tone Bell /Buzzer with Flasher arrangement and 20 Watt horn working on 24 V DC/ 110 V AC for warning road users at LC gates. Inspection: Consignee

Supply of Track feed Battery Charger as per RDSO Specn. No.IRS: 5-89/2013 Ver.1.0 or latest. Charging Capacity Rating 10 Amps for Charging 80 AH Battery. Inspection: RDSO

Supply of Adjustable Track Feed Resistance 30 Ohms (Disc Type) as per RDSO Drg. No.SA- 20161-66/ M or latest. Inspection: Consignee

Supply of B Type Choke as per RDSO Specn. No.IRS: S-65/83 (Airind. 1) or latest. Inspection: RDSO.

"Supply of Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. 5- 69/M. Inspection: Consignee."

Supply of GI wire 8 SWG (4mm dia) suitable for track circuit rail bonding. Inspection: Consignee

"Casting, concreting and curing of foundation (1:3:6) and erection of SLB/BSLB/SB/WB/ Stop board as per DRG. NO S&T/C@47"40@NKG) all materials required for the work including cement, rail post etc. To be supplied by the contractor. This includes supply of SLB/BSLB/SB/WB/ Stop board as per RDSO DRG NO. SA-2375 (ADV.) ( WITH LATEST AMDT.) for SLB/BSLB and as per RDSO DRG NO.

Dismantling of level crossing gates with all accessories as per site engineers. 68

C.I. foundation 'A' type with hole SPEC.IRS-5- 10/78 (LATEST). Inspection - Consignee. 69

C.I. foundation 'B' type with hole SPEC.IRS-5- 10/78 (LATEST). Inspection - Consignee.

Casting of A/B type foundation for fixing adjustment arc lever, accommodating crank etc. With supply of cement, sand and ballast.

Dismantling of level crossing gates with all accessories as per site engineers.

Supply of Thermo shrink Universal Jointing kit for Quad Cable (for straight joints) as per RDSO spec IRS/TC-77/ 2012 revision 3 With latest Amdt.

Supply of hand operated track drilling machine for bonding hole. Inspection: Consignee

Supply of Drill bit 9/32" (7.14MM). IS:5099/83 AND 5101/69 OR LATEST. Inspection: Consignee

Provision of cement concrete enclosure for earth electrodes as per DRG. NO. S&T/C- 36(NKG). This includes supply of all materials by the contractor duly inspected by consignee.

Painting two coats of enamel paint over one coat of Red Oxide primer on the following items after scrapping and cleaning of the surface wherever necessary. Primer and Paints both of any reputed make are to be supplied by Contractor. The work shall be done as per instructions of rly engineer at site and extant practice on E Rly on location boxes, signal posts, TLJB. This includes lettering/ Numbering of signals, TLJB & Block joints if any, apparatus Cases, gate booms , etc , Description writing , legibly and neatly inside location boxes , relay hut, gate lodge etc. - for LC Gate.

Dismantling of level crossing gates with all accessories as per site engineers.

Disconnection & Reconnection of All Signalling Equipments like Cables/TLJB/Point Machine G.Fitting/Point JB/BPAC Track Device etc. immediate before and after the work during block period. This Includes cost of the Releasing of Signalling equipmets and Reconnection of the same after the work. This includes 1 Fitter, 1 Black Smith, 1 Hammer Man, 1Cable Jointer, 1 Bonding fitter, 4 Khalasis.