District Magistrate Tender

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(III) Cement concrete with 32 mm down graded gravel excluding shuttering

Brick work with 1st class bricks in cement mortar (6:1)

125 mm. thick brick work with 1st class bricks in cement mortar (4:1)

Ordinary Cement Concrete (mix 1 :1.5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using …. including fitting, fixing and striking out after completion of works. (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including ... at every inter-section, complete as per drawing and direction. II.JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work.... if necessary or by synthetic adhesive & grout materials etc.With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. a) Area of each tile upto 0.09 Sq.m ii) Other than Coloured decorative including white A) Floor

B) Wall

Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge

PVC Door Shutter-30 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm)wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials,labour, and hire of tools and plants and appliancesi/

(a) M.S.or W.I. Ornamental grill of approved design joints.continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in ground (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Galvanised plain sheet works (excluding supporting framework) fitted and fixed with 6 mm. dia J or L hook-bolts and nuts, sheet-bolts, limpet and bitumen washers and putty with 150 mm. end lap & 50 mm minimum side lap complete b) In wall: with 0.63 mm. sheets

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of ncrete surface, including throating, nosing and drip course where necessary. A. (i) With 1:6 cement mortar (b) 20 mm. thick plaster

B. (i) With 1:6 cement mortar (c) 15 mm. thick plaster

C. (ii) With 4:1 cement mortar (c) 10 mm. thick plaster

Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc. in all floors about 1.5 mm thick

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification (iii) Two coats (a) Internal surface Two Coats.

(b) External surface Two Coats.

Supplying PVC water storage tank of approved quality with cosed top with lid (Black) - Multilayer (b) 500 Lit capacity

Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS: 1239 (Part-I) with all necessary accessary accessories, specials viz. socket, bend tee, union cross, elbo, nipple........made for accesories, specials . (a) For Exposed Work PVC Pipes (Dia) (a) 15 mm

(c) 25 mm

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with joining materails ( Spun Yarn, Valamoid / Bitumen/ M-Seal etc.) complete A) UPVC Pipes: (ii) 110 mm dia

B) UPVC Fittings (d) Shoe (ii) 110 mm dia

C) UPVC Fittings © Bend 87.5 degree (ii) 110 mm dia

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding "P" or "S" trap (excluding cost of concrete for fixing) (ii) 530mm x 440 mm

Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia R.C.C manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100 mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below G.I floor finished with 25 mm thick gray artificial (A) With Pakur Variety (i) For 10 users

Wash basin white vitreous china of approved make supplied , fitted and fixed in position of 75 mm x 75 mm x 75 mm wood blocks and C.I brackets including two costs of painting of C.I brackets (ii) 450 mm x 300 mm size

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. (A) "P" trap (iii) 100 mm

Supplying, fitting and fixing cast iron "P" or "S" trap conforing to I.S 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed (A) "P" trap (iii) 100 mm

Supplying, fitting and fixing bib cock or stop cock (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm dia

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm. (v) 25 mm

Supplying, fitting and fixing Display Board

Add GST @18%

Add CESS @1%