District Magistrate Tender

Supplying and laying brick Khoa of ordinary bale of size (38 mmx 63 mm)of approved quality in TOO mm layer (loose) filling in gaps with small onesrammed and compact as directed true to level and grade.

Ordinary Cement concrete (mix 1:2.4) with graded stone chips (20 mm nominal size) excluding shu\tering and reinforcement if any, in ground floor as per relevant IS codes. a) Pakur Variety

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (asnecessary) and marble dust in proportion (1:2) includingsmaoth finishing and rounding oP comers including rakingout joints or roughening of conaete surface and applicationof cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including.all materials arid labour. In ground floor. 3 mm. thick topping (H gn polishing grinding on this ilem is not pemiBed with ordinary cement). Using grey cement (ii) 25 mm. thick

Ordinary Cement concrete( mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant of IS codes.

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking, bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter section complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor / upto 4m.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) f) 25 mm to 30 mm thick wooden shuttering without staging in Foundation.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 25 mm to 30 mm thick wooden shuttering with staging

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundaùon and plinth

Brick work with 1st class bricks in cement mortar (1:6) (b) In Superstructure, Ground Floor

125 mm. thick brickwork with 1st class bricks in cement mortar (1 : 4) in ground floor. Extra for using approved netting in every third layer in any floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course ,scaffolding /staging where necessary (ground floor). (A) with (1:4) cement mortar. (i) 20 mm. thick plaster.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course ,scaffolding /staging where necessary (ground floor). (A) with (1:4) cement mortar. (ii) 10 mm. thick plaster.

Neat cement punning about 1.5mm thich in wall, aaao, window sill, floor etc. NOTE.Cement 0.152 cu.m per100

Supplying 1.5mm thick M.S. sheet faed and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labaur and materials.

M.S. gate of Jail type as per approved design made of strong M S. frame work, intermediate sbffeners and round / square bars or angles. M.S. sheet (not less than 14gauge)gussets.cleats etc.including necessary riveting. bolting, welding, locking and hanging arrangements, fitting and ñxing complete as per direction of the Engineer-in -charge.

White washing including cleaning ard smoothening surface thoroughly a) One Coat

Colour washïng with any shade with strainers, as requiæd including cieaning and smoothening surface thoroughy : (ii) External surface (Ground floor) b) Two coats (on new works only). (i) Other than yellow, pÎnk.

Colour washïng with any shade with strainers, as requiæd including cieaning and smoothening surface thoroughy : (i) Internal surface (Ground floor) b) Two coats (on new works only). (i) Other than yellow, pÎnk.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and bland including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary . (b) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)

M.S. structural works in roof trusses with tubular sections confomling to IS: 806-1968 & lS: 1161-1998 Cnnected to one another with bracket, gusset cleats as per design. direction of Engineer-in- charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to lS:814 2004, haulage, hoisting and erection all complete.The rate includes the cost of rolIed steel section, consumables suchas electrodes, gas and hire charge of ay tools and plants and IaDour reqired for the work including all incidental cljages such aseiectncity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular members as specified in relevent IS code in finished work.Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weght of finished Structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. ij For trusses spanning up to 12.00 m

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on.area of finished work‹)(GCC sheet to be supplied by contractor (i) In Roof:- b)With 0.63 mm thick sheet

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(22smm end lapping) B) 450 mm lapping each way (b) With 0.63 mm sheet

Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet to match with GCI Corrugation as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J" or “L” hook, bolts and nut, limpet and bitumen washers and putly with 150mm end lap and one corrugation minimum side lap complete. a) 1.6mm +/- 0.2 mm thick sheet.(2.6Kg/Sq,m) I) Natural white or tinted blue colour

Galvanised or painted wind-tie.made of M.S. flats, fitted and fixed complete induding cost of necessary fittings. (b) Made with 50 mm. X 6 mm. flats

Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to gñd of horizonal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc. (VI) 25 mm. x25 mm. x 12 g.

Supplying fitting fixing UPVC Pipe with all necessary clamps nails including making holes in walls. (110mm dia) single socketed 3 meter length

B) UPVC Fittings: c) Bend 87.5 degree (ii) 110 mm. Dia.

Add GST @ 18% (It 1-31)

Add Cess @ 1% (It 1-32)