District Magistrate Tender

(I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering.In ground floor.

Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes.

Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor).

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface].

Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.

(b) Medium sand (fineness modulus 1.8 to 2).

Stone Metal 30 mm down of N. Bengal variety

Supplying and filling with Charcoal including all cost and conveyance materials and all labour charges etc., complete as per standard specifications

Inspection Chamber (Lumpsum)

M.S structural work in colums, beams etc. with simple roled structural members (e.g. joints angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineering -in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc weldingconforming to IS: 816 - 1956 & IS :1995 using electrodes of approved make and brand conforming to IS: 814 - 1957, haulage, hoisting and erections all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidential charges such as electricity charges, labour incurance charges etc.(Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for Gusset, bracket, cleat, rivets, bolts and nuts may be make by adding

Galvanized plain sheet works (excluding supporting frame work) fitted and fixed with 6 mm.dia J or L hook-bolts and nuts .sheet-bolts.limpet and bitumen washers and putty with 150 mm. end lap & 50 mm. minimum side lap complete.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 .

Miscellaneous

Supplying sign-board. 900mm x 600mm size of board

Add GST 18%

Add Cess 1%

For One Unit (01)

For Four Units (04)