District Magistrate Tender

Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth

Earthwork in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. a) with earth obtained from excavation of foundation.

Earth work in fillimg in foundation trenches or plimth with good earth………………………………………………………….layar by layer complete.

Hire charges for shuttring with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beam, columns, lintles curved or straight including fitting, fixing and striking out after completion of works.(In all floors) 25mm to 30mm thick wooden shuttering without stagging in foundation.

Reinforcement for R.C.C. works in sll sorts of structures including distridution bars, stirrups, binders etc.including supply of rods, straightening and removal of loose rust, cuttigng to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter section, complete as per drawing and direction. Tor Steel. 1. % of R.C.C. work----

Ordinary (Mix 1:1.5:3) cement concrete with graded stone chips (20mm size) excluding shuttering and reinforcement. If any, RajMahal

125 mm thick brick work in cement morter 4:1 in ground floor

Plaster to wall, floor etc with sand and cement morter including rounding off or champhering corners as directed and racking out joints or roughing of concrete surface including throating, nosing and drip course where necessary (In Ground floors). With 1:6 cement morter. 20 mm thick plaster.

15 mm thick plaster.

With 1:4 cement morter. 10 mm thick plaster.

Colour washing in wall

Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete [P-117,Item No8]

PVC Door Shutter-30 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C.door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm)wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges.Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in themiddle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete. [P-134, Item No-27]

Construction of circular soak well

Construction of Inspection pit of indside measurement 600mmX600mmX600mm……………………..labour and materials

Construction of Septic tank

Suppying fitting And fixing Orissa pattern water closet in white glazed ……………………..complete excluding "P" trap & "S" trap.

Suppying fitting And fixing squating platelwith intigral flushing in white vitreous……………………..complete . 450mmx 350mm

Supplying P.V.C. water storage tank of approved quality with closed top (a) 1000 litre capacity

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centreline measurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately (A) For Exposed Work (ii) 25 mm dia. medium quality

(ii) 20 mm dia. medium quality

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc A) Floor (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

(g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21kgper sq. cm.

Add up to 18% GST

Add up to 1% Cess